| Specification |
After-sales Service: Technical Support;
Warranty: 1 Year;
Accuracy: >±1%;
Main Application: Nature Gas, Gas;
Size: DN10-50;
Sensor: Tube/Flange;
Application: Industrial Production;
Type: Turbine Flow Meter;
Measuring Media: Gas;
Measuring Principle: Electrical Principles;
Measurement Object: Closed Pipeline;
Caliber: DN25 - 250;
Range Ratio: 1:10, 1:20, 1:30;
Temperature of Medium: -10~+100 Degree;
Communication Signal: Three-Wire Pulsing;
|
After-sales Service: Video Guidance;
Warranty: 18 Months;
Accuracy: 0.25% 0.5% 1%;
Main Application: Water, Wastewater, Diesel Fuel, Fuel Oil, Nature Gas, Corrosive Liquid/Gas, Gas, Liquid, Steam;
Size: DN15-DN2000;
Sensor: Throttling Gear;
Application: Industrial Production;
Type: Differential Pressure Flowmeter;
Measuring Media: Liquid, Gas, Steam, Other Mixed Media;
Measuring Principle: Differential Pressure Principle;
Measurement Object: Closed Pipeline;
According to National Standards: GB/T2624-93 Design and Manufacture;
According to The National Verification R: Jjg 640-94 Was Tested;
Pressure Extraction Method: Angle Contact Pressure, Flange Pressure, D-D/2 Pre;
Nominal Pressure: 0.6~32(MPa);
Medium Temperature: -10ºC~+450ºC;
Straight Pipe Length Requirement and Thr: in Accordance with Relevant Provisions of GB/T2622;
|
After-sales Service: Factory Warranty;
Warranty: 1 Years;
Accuracy: 1%;
Main Application: Water;
Size: DN15mm-DN6000mm;
Sensor: Clamp-on/External;
Application: Industrial Production;
Type: Ultrasonic Flow Meter;
Measuring Media: Liquid;
Measuring Principle: Acoustics;
Measurement Object: Closed Pipeline;
Power Supply: 24VDC;
Material: ABS;
Protection Class: IP65;
Signal Output: 4-20mA /RS485;
Connection: Clamp;
Display: LCD;
Measure Temperature: -30~90(160);
Power Consumption: Less Than 1.5W;
|
After-sales Service: Factory Warranty;
Warranty: 1 Years;
Accuracy: 0.5%;
Main Application: Water, Diesel Fuel, Fuel Oil;
Size: DN4-DN200;
Sensor: Tube/Flange;
Application: Industrial Production;
Type: Turbine Flow Meter;
Measuring Media: Liquid;
Measuring Principle: Mechanics;
Measurement Object: Closed Pipeline;
Power Supply: 12~24VDC;
Material: PE;
Output: Pulse;
Connection: Flange Clamp Thread;
Display: LCD;
Pressure: 6.3/2.5/1.0MPa;
|
Warranty: 12 Months;
Accuracy: ±0.6-1%;
Main Application: Water, Wastewater, Diesel Fuel, Fuel Oil, Nature Gas, Corrosive Liquid/Gas;
Size: DN50-100;
Application: Industrial Production;
Type: Turbine Flow Meter;
Measuring Media: Liquid;
Measurement Object: Closed Pipeline;
|
