| Specification |
Type: Professional Amplifier;
Usage: Hi-Fi;
Used For: Professional;
Tube Type: Transistor Amplifier;
Function: Amplifier Combined;
Sound Channel: Single;
Output Power: 6W;
Max. Power: 12W;
Network Communication Protocol: SIP, ARP, ICMP, DHCP, UDP, DNS, Igmp;
Network Interface: 10/100base-Tx,RJ45;
Frequency and Sampling Rate: 8kHz-32 kHz, 16 Bit;
Decoding: MPEG,Adpc;
Microphone Frequency Range: 70Hz-12.5kHz;
Operating Temp.: 0~65°c;
Power Consumption: Less Than 300mv in Static;
Power Supply: 9- 24 VDC;
Dimension: 130 X 85 X 30 mm;
|
Type: Professional Amplifier;
Usage: KTV System;
Used For: Professional;
Tube Type: Transistor Amplifier;
Function: Post Amplifier, Amplifier Combined, Pre-amplifier;
Sound Channel: 2.1;
Output Number: 4;
Voltage: AC110V/220V;
Element Number: Push-Pull Amplifier;
Conductive Mode: D;
Bridge Power 8Ω: 1200W;
Output Power: 2X600W;
Frequency Response: 20Hz-20kHz+0/-0.3dB@1W;
Thd+N: <0.03% @8Ω 1kHz;
Input Impedance: 20KΩ(Balance)/10KΩ(Unbalance);
|
Type: Professional Amplifier;
Usage: KTV System;
Used For: Professional;
Tube Type: Transistor Amplifier;
Function: Post Amplifier, Amplifier Combined, Pre-amplifier;
Sound Channel: 2.1;
Output Number: 4;
Voltage: AC110V/220V;
Element Number: Push-Pull Amplifier;
Conductive Mode: D;
Input Impedance: 20KΩ(Balance)/10KΩ(Unbalance);
Input Sensitivity: 0.775V/1.0V/1.4V;
Protection: Output Relay-Zero Current Switch , Intellectual Cl;
Frequency Response: 20Hz-20kHz+0/-0.3dB@1W;
|
Type: Professional Amplifier;
Usage: KTV System;
Used For: Professional;
Tube Type: Transistor Amplifier;
Function: Post Amplifier, Amplifier Combined, Pre-amplifier;
Sound Channel: 2.1;
Output Number: 4;
Voltage: AC110V/220V;
Element Number: Push-Pull Amplifier;
Conductive Mode: D;
Stereo Power 8Ω: 2×600W;
Bridge Power 8Ω: 1200W;
Frequency Response: 20Hz-20kHz+0/-0.3dB@1W;
Input Sensitivity: 0.775V/1.0V/1.4V;
|
Type: Professional Amplifier;
Usage: KTV System;
Used For: Professional;
Tube Type: Transistor Amplifier;
Function: Post Amplifier, Amplifier Combined, Pre-amplifier, Stage Performance;
Sound Channel: 4.1;
Output Number: 8;
Voltage: AC110V/220V;
Element Number: Push-Pull Amplifier;
Conductive Mode: D;
8 Ω Stereo Output Power: 4X1200W;
8 Ω Bridge Mono Output: 2400W;
Number of Channels: 4;
Connection Socket: XLR Type, 3 Pin Male;
|