Specification |
Sensing Method: RFID/Face Recognition;
Application: Access Control System;
Movement: Single Movement;
Type: drop arm turnstile;
Control Mode: Automatic;
Communication Interface: RS485, TCP/IP, Wiegand;
Power Supply: AC220V/AC110V;
Power Consumption: 100W/24V;
Temperature: -15 to 60 Degrees;
Humidity: <95%, Without Concretion;
Passage Width: <=600mm;
Passing Speed: 30 Persons/Min (Normal Open);
Arm Open/Close Time: 0.6s;
Arm Length: 500mm;
Arm Turning: Bi-Direction;
|
Sensing Method: Electric;
Application: Access Control System;
Movement: Single Movement;
Type: Swing Gate;
Control Mode: Automatic;
Name: Supermarket Electrical Automatic Barrier Turnstile;
Standard Size: L600xh600;
Material: ,Metal;
Finishing: Chrome;
|
Sensing Method: Electric;
Application: Access Control System;
Movement: Double Movement;
Type: Three Roller Gates;
Control Mode: Automatic;
Communication Interface: RS485;
LCD Display: 3.5'' TFT High-Definition Graphical Interface;
Language: Mult Language, English, French, Spanish, Arabic;
Speaker: Voice Prompt (Language Can Be Selected);
Capacity: Fingerprint: 3, 000logs: 100;
Communications: TCP/IP, USB-Host, RS232/485;
Power Supply: 110/220VAC-23VDC/3A;
Attendance Status: Check in, Check out;
Customize Function: ID Card Reader; MIFARE Card Reader;
|
Sensing Method: Electric;
Application: Access Control System;
Movement: Double Movement;
Type: Three Roller Gates;
Control Mode: Automatic;
Communication Interface: RS485;
LCD Display: 3.5'' TFT High-Definition Graphical Interface;
Language: Mult Language, English, French, Spanish, Arabic;
Speaker: Voice Prompt (Language Can Be Selected);
Capacity: Fingerprint: 3, 000logs: 100;
Communications: TCP/IP, USB-Host, RS232/485;
Power Supply: 110/220VAC-23VDC/3A;
Attendance Status: Check in, Check out;
Customize Function: ID Card Reader; MIFARE Card Reader; HID Card Reade;
|
Sensing Method: Electric;
Application: Access Control System;
Control Mode: Automatic;
Model Number: Pd-232;
Voltage: 220VAC;
Color: Black;
Output Interface: Two Relay;
Input Delay: No;
|