Specification |
Shaping Mode: Injection Mould;
Surface Finish Process: Polishing;
Mould Cavity: Single Cavity;
Plastic Material: PP;
Process Combination Type: Single-Process Mode;
Application: Car;
Runner: Hot Runner;
Design Software: UG;
Installation: Fixed;
Standard: DME;
Customized: Customized;
Usage: Touring Car;
Type: SUV;
Service Life: 1-3 Years;
Mileage: 10000-30000 Km;
Gearbox: Automatic;
Fuel: Electric;
Braking System: Mechanical;
Color: White;
Road Conditions: Road;
Seats: 5;
Drive: Rear Wheel Drive;
Electric Drive System: Rwd Singe Motro;
Wheelbase: 2750mm;
|
Shaping Mode: Injection Mould;
Surface Finish Process: Polishing;
Mould Cavity: Single Cavity;
Plastic Material: PP;
Process Combination Type: Single-Process Mode;
Application: Household Appliances, Commodity, Home Use;
Runner: Hot Runner;
Design Software: UG;
Installation: Fixed;
Standard: DME;
Customized: Customized;
Mould Material: P20 or 718;
Lifetime: 500,000 Shots or 700,000 Shots;
|
Shaping Mode: Injection Mould;
Surface Finish Process: Polishing;
Mould Cavity: Single Cavity;
Plastic Material: PP;
Process Combination Type: Single-Process Mode;
Application: Commodity, Home Use;
Runner: Cold Runner;
Design Software: UG;
Installation: Fixed;
Standard: DME;
Customized: Customized;
Mould Material: P20 or 718;
Lifetime: 500,000 Shots or 700,000 Shots;
|
Shaping Mode: Injection Mould;
Surface Finish Process: Electroplating;
Mould Cavity: Multi Cavity;
Plastic Material: PP/Pctg/PETG/ABS/PC-2000/;
Process Combination Type: Single-Process Mode;
Application: Cosmetics/Medical;
Runner: Hot Runner;
Design Software: UG;
Installation: Semi Fixed;
Standard: DME;
Customized: Customized;
Mold Shaping: Plastic Injection Molding;
Mold Base: Lkm;Hasco;Dme, etc;
Mold Material: 2343/2344/H13/S136, etc;
Tolerance: +/-0.01mm;
Lead Time: 4weeks Until T1;
Product Name: Cosmetics Product Plastic Injection Molding;
|
Shaping Mode: Injection Mould;
Surface Finish Process: Polishing;
Mould Cavity: Multi Cavity;
Plastic Material: PP;
Process Combination Type: Single-Process Mode;
Application: Commodity, Hardware, Building Material;
Runner: Cold Runner;
Design Software: UG;
Installation: Fixed;
Standard: DME;
Customized: Customized;
Mould Material: P20 or 718;
Lifetime: 500,000 Shots or 700,000 Shots;
|