Specification |
Metal Coating: Plastic;
Mode of Production: SMT;
Layers: Single-Layer;
Base Material: FR-4;
Customized: Non-Customized;
Condition: New;
Battery Type: LiFePO4, Limno4, AGM, Gell, Flooded Battery;
Battery Capacity: Unlimited;
Battery Method: Energy Transfer/Dynamic;
Balance Current: 1A/1.2A/2A/5A/10A;
Work Efficiency: Over 94%;
OEM: Yes;
BMS Limited: Can Work with BMS or Can Work Independently;
Name: 1A 2A 5A LiFePO4 Lithium Lipo Lto Capacitor Energy;
Model: 3s-24s;
Supercapacitor: with Bt Mobile APP;
Surface Finishing: 2-24s 1A/2A/5A/10A;
Undervoltage Sleep Value: Sleep Voltage Can Be Selected From 2.0V 3.0V 3.7V;
|
Metal Coating: Copper;
Mode of Production: SMT;
Layers: Multilayer;
Customized: Customized;
Condition: New;
MOQ: 1 Piece;
Handing Standards: Ipc-a-600h, Ipc-a-610f, J-Std-001f;
Technical Support: Free Dfm/a Check, Bom Analysis;
Assembly Abilities: SMT 5 Milli Points Per Day, DIP 10 Thousands Piec;
Assembly Details: 5 SMT + 2 DIP (Dust and Anti-Static Lines);
5 SMT + 2 DIP (Dust and Anti-Static Lin: PCB Design + PCB Fab + Components Sourcing + PCB;
Value-Added Services: Bom Analysis, Conformal Coating, IC Programming, W;
|
Metal Coating: Gold;
Mode of Production: SMT+DIP;
Layers: Multilayer;
Base Material: FR-4;
Customized: Customized;
Condition: Used;
|
Metal Coating: Copper;
Mode of Production: SMT;
Layers: Multilayer;
Customized: Customized;
Condition: New;
MOQ: 1 Piece;
Handing Standards: Ipc-a-600h, Ipc-a-610f, J-Std-001f;
Technical Support: Free Dfm/a Check, Bom Analysis;
Assembly Abilities: SMT 5 Milli Points Per Day, DIP 10 Thousands Piec;
Assembly Details: 5 SMT + 2 DIP (Dust and Anti-Static Lines);
5 SMT + 2 DIP (Dust and Anti-Static Lin: PCB Design + PCB Fab + Components Sourcing + PCB;
Value-Added Services: Bom Analysis, Conformal Coating, IC Programming, W;
|
Metal Coating: Copper;
Layers: Multilayer;
Base Material: FR-4;
Customized: Customized;
Condition: New;
Quality Test: Aoi, 100% E-Test;
V- Cut Tolerance: +-10mi;
Bevel Edge: +-5mil;
Hole Location Tolerance: +-2mil;
Hole Diameter Tolerance: +-0.05mm;
Board Thickness Tolerance: +-5%;
Line Width/Space Tolerance: +-10%;
|