Vertical shaft impact crusher is widely used in all kinds of mineral, cement, corhart, bauxite chmotte, carborundum grain, glass raw material, machine made construction sand, stone stock and all kinds of metallurgy slag, especially carborundum, sintered bauxite, magnesite, and so on material with features of very hard and anticorrosion. And Sand Making Machine is more productive than other kind of crushers.
The sand making machine integrates three crushing modes, and can continuously work for 720 hours. Higher crushing chamber, greater crushing impact. During the parts and material procurement, production and processing, the quality is strictly controlled. Wearing parts is optimally allocated for longer service life.
Vsi Crusher Working principle:
Stone is crushed by hitting other stones. Material falls down to impellor cavity. Under great centrifugal force, it hits material that coming downwards. After hitting each other, they force a vortex between impellor and shell, and hit each other several tomes; Finally smaller stone comes out, and goes to vibrating screen. Satisfactory material is transported to sand washing machine; However overlarge material will go back to sand maker to be recrushed. Output sizes can be made accoding to customers requirement. If input size is largeer than the designed size, other crushing equipment will be necessary.
The VSI series impact break is equipped with the German original thin oil lubrication station. The dual oil pump used in this lubrication station can be complementary to guarantee the oil supply. Automatic stop when no oil flow or oil pressure; Moreover, because the oil cooling and heatingreduces the cost of the vulnerable parts.
device can ensure that the bearing lubrication is always in an ideal state, it can keep the spindle bearing constant temperature and completely solve the bearing heating problem. Consider sand making machine in the process of production problems such as maintenance, spare parts replacement, we throw in addition to the traditional backward way of lifting the lid and the way of manual jacks up the cover and the introduction of semi-automatic hydraulic system, the operator only needs to press a button can then play the boot lid, and carry on the next steps, etc. The system greatly reduces labor intensity, saving labor cost and improving efficiency. VSI impact hammer, impact on the rotor block adopts modular design, such as when the parts wear parts, can replace the worn alone modules, avoid the traditional monolithic material waste caused by design, thus greatly reduce the cost of use and replacement parts. According to the actual
production, we found that more than weeks guard by central began to wear away, under the condition of adopting one-piece weeks guard board, when central serious wear and tear, it is necessary to replace the whole piece of armor plate, which further increases the vulnerability of using cost; After the design of the industrial improvement, the central wear can be used up and down, which greatly extends the service life of the plate and
VSI Crusher Advantages and Features:
1. Rotor design of deep-cavity is optimized then the amount of matgerials is increased by 30%.
2. Round guard plate can have a U-turn after partially wearing, thus to improve material utilization.
3. Special sealing structure in the bottom of the spindle to ensure no oil sealing and leaking.
VIS Series Vertical Shaft Impact Crusher http://dingbozhonggong.en.made-in-china.com/
VSI SeriesVertical Shaft Impact Crusher |
model |
Capacity(t/h) |
Max. feeding
size(mm) |
Overall
dimen
sion(mm) |
Double electric
motor power(kw) |
Rotating
speed(r/min) |
Weight (t) |
Feedinga
tcenter
andsizes |
Allfeeding
atcenter |
Soft
material |
Hard
material |
VSI-7611 |
120-180 |
60-90 |
< 35 |
< 30 |
3700*2150*2100 |
55*2 |
1700-1890 |
7.8 |
VSI-8518 |
200-260 |
100-130 |
< 40 |
< 35 |
4140*2280*2425 |
90*2 |
1520-1690 |
10.3 |
VSI-9526 |
300-380 |
150-190 |
< 45 |
< 40 |
4560*2447*2778 |
132*2 |
1360-1510 |
16 |
VSI-1140 |
450-520 |
225-260 |
< 50 |
< 45 |
5000*2700*3300 |
200*2 |
1180-1310 |
22 |
VSI-1145 |
500-640 |
250-360 |
< 50 |
< 45 |
5100*2790*3320 |
220*2 |
1200-1310 |
23.5 |
VSI-8522 |
240-380 |
120-200 |
< 40 |
< 35 |
4140*2500*2700 |
110*2 |
1300-1510 |
14.8 |
VSI-9532 |
350-540 |
180-280 |
< 45 |
< 40 |
4560*2600*2900 |
160*2 |
1100-1310 |
18.6 |