Specification |
Application: Aviation, Electronics, Industrial, Medical, Chemical;
Standard: JIS, GB, DIN, BS, ASTM, AISI, ISO 9001;
Purity: >98%;
Alloy: Alloy;
Type: CuNi Strip;
Powder: Not Powder;
Technique: Cold Drawing;
Treatment: Hydrogen Annealing;
Surface: Bright;
Condition: Soft Annealed;
Max Working Tem: 250c;
Resistivity: 0.15ohm/M;
Density: 8.9g/cm3;
TCR X10-6 / 0c (20~600 0c): <50;
Emf Vs Cu (μV/ 0c) (0~100 0c): -25;
Melting Point: 1100c;
|
Application: Aviation, Electronics, Industrial, Medical;
Standard: GB, ASTM;
Purity: Ni:6.0-7.0% Cu: 3.0-4.0%;
Alloy: Alloy;
Type: Plate, Rod, etc;
Powder: Not Powder;
Lead Time: 10~25days;
Yeild Press: Yeild Press;
Density: 16.8-18.5 g/cm3;
Main Market: Main Market;
Elogation: 5.0%;
5.0%: 828MPa;
Material: Wnicu;
Chemical Composition: W Ni Fe Cu O C;
HRC: 25.6;
|
Purity: >99.5%;
Alloy: Alloy;
Type: Nickel Wire;
Powder: Not Powder;
Resistance: 1.09tolerance0.05;
Ultimate Strength (≥ MPa): 1800;
Elongation (≥ %): 20;
PTC Resistance Wire Diameter: 0.04mm-5m;
Model Number: PT-4500,PT4000,PT-3800,PT3000,PT2500;
|
Application: Industrial;
Standard: JIS, GB, DIN, ASTM;
Purity: Ni>57%;
Alloy: Alloy;
Type: Tube;
Powder: Not Powder;
Width: 10~1200mm;
State: Forging;
Tech.: Cold Drawn, Hot Rolled;
ASTM: B575;
DIN/En: 2.4819;
Uns: 10276;
Ts: >690MPa;
Heating Treatment: 1~2hours(1150-1170degree);
Elongth: >40%;
|
Application: Industrial;
Standard: JIS, GB, DIN, ASTM;
Purity: Ni>57%;
Alloy: Alloy;
Type: Tube;
Powder: Not Powder;
Width: 10~1200mm;
State: Forging;
Tech.: Cold Drawn, Hot Rolled;
ASTM: B575;
DIN/En: 2.4819;
Uns: 10276;
Ts: >690MPa;
Heating Treatment: 1~2hours(1150-1170degree);
Elongth: >40%;
|