Specification |
Logo Printing: Without Logo Printing;
Customized: Both Customized & Non-Customized;
Type: Mining Tools;
Material: Tungsten Carbide;
Wc+Co Powder: 100% Virgin Material;
Cobalt Percentage: From 3% to 30% Based on Different Grades;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Grades: Yg6, Yg8, Yk05, Yg8c, Yk20, Yk25, Yg11c, Yg13c etc;
Surface Finishing: Polished and Unpolished;
Main Using Purpose: for Mining Tools;
|
Logo Printing: Without Logo Printing;
Size: Polished Tungsten Carbide Cutting Disc Cutter;
Customized: Customized;
Type: Cutting Tool;
Material: 100% Raw Material Tungsten Carbide;
Grade: K10, K20, K30, Yl10.2, etc;
Hardness: >91.0 Hra;
T.R.S.: 1800~2000 MPa;
Density: 14.6~15.0;
Grain Size: Ultrafine;
Performance: High Hardness;
Suitable: for Fabric, Wood, Steel, PCB Board, etc;
Tolerance of T: +/-0.05mm;
|
Logo Printing: Without Logo Printing;
Size: Polished Tungsten Carbide Cutting Disc Cutter;
Customized: Customized;
Type: Cutting Tool;
Material: 100% Raw Material Tungsten Carbide;
Grade: K10, K20, K30, Yl10.2, etc;
Hardness: >91.0 Hra;
T.R.S.: 1800~2000 MPa;
Density: 14.6~15.0;
Grain Size: Ultrafine;
Performance: High Hardness;
Suitable: for Fabric, Wood, Steel, PCB Board, etc;
Tolerance of T: +/-0.05mm;
|
Logo Printing: Without Logo Printing;
Size: Polished Tungsten Carbide Cutting Disc Cutter;
Customized: Customized;
Type: Cutting Tool;
Material: 100% Raw Material Tungsten Carbide;
Grade: K10, K20, K30, Yl10.2, etc;
Hardness: >91.0 Hra;
T.R.S.: 1800~2000 MPa;
Density: 14.6~15.0;
Grain Size: Ultrafine;
Performance: High Hardness;
Suitable: for Fabric, Wood, Steel, PCB Board, etc;
Tolerance of T: +/-0.05mm;
|
Logo Printing: Without Logo Printing;
Size: Polished Tungsten Carbide Cutting Disc Cutter;
Customized: Customized;
Type: Cutting Tool;
Material: 100% Raw Material Tungsten Carbide;
Grade: K10, K20, K30, Yl10.2, etc;
Hardness: >91.0 Hra;
T.R.S.: 1800~2000 MPa;
Density: 14.6~15.0;
Grain Size: Ultrafine;
Performance: High Hardness;
Suitable: for Fabric, Wood, Steel, PCB Board, etc;
Tolerance of T: +/-0.05mm;
|