| Specification |
Type: Round;
Standard: AISI;
Composition: Tungsten Carbide;
Technique: Hot Rolled;
Shape: Circular;
Surface Treatment: Galvanized;
Special Use: High-strength Steel Plate, Wear Resistant Steel, Free Cutting Steel;
Application: Tool Steel Bar;
Hardness: High;
|
Type: Coil;
Standard: AISI, ASTM, DIN, JIS, GB, BS;
Composition: Stainless Steel Scrap;
Technique: Cold Rolled;
Shape: Strip/Coil;
Surface Treatment: Coated;
Special Use: High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel;
Application: Structural Steel Bar;
Material: ,Q235 Q345;
Width: 13-16-19-25-31.75mm;
Thickness: 0.3-1.0mm;
Surface: Black, Blue ,Green;
Az Coating: 30-275G/M2;
E.L.: 3%-5%;
Coil ID: 508/610mm;
|
Type: Round;
Standard: ASTM;
Shape: Bar;
Surface Treatment: Polished;
Special Use: Wear Resistant Steel;
Application: Boiler Plate;
Product Name: Stellite 6 Round Bar;
Casting Form Material: Metal;
Surface Roughness: Ra0.2;
Machining Tolerance: +/-0.10mm;
Coating: Syrup or Pulp Waste;
Density: Customed;
Tolerance: Customed;
|
Type: Round;
Standard: AISI, ASTM, DIN, JIS, GB, BS;
Composition: Ferrous Steel Scrap;
Technique: Forged;
Shape: Bar;
Surface Treatment: Polished;
Special Use: Spring Steel;
Application: Structural Steel Bar;
Payment Term: 30% Tt Deposit, Balance Against Bl Copy;
Length: 6000mm, 9000mm, 1200mm;
Ex-Stock: No;
Delivery Date: 30 Days;
Ut Standard: Sep 1921-84 D/D;
Grain Size: ASTM E112;
Non-Metallic Inclusiton: ASTM E45;
Form: Round Bars/ Flat Bar / Blocks/ Tube;
Process: Eaf+Lf+Vd+Forged+Heat Treatment(Optional);
Technology: Hot Rolled/ Forged/ Cold Drawn;
Heat Treatment: Normalized;Annealed ;Quenched ;Tempered;
Surface: Black; Peeled; Polished; Machined; Grinded; Turned;
Test: Ensile Strength, Yield Strength, Elongation;
Experience: 15 Years Manufacturer Experience;
|
Type: Round;
Standard: ASTM;
Shape: Bar;
Surface Treatment: Polished;
Special Use: Wear Resistant Steel;
Application: Boiler Plate;
Product Name: Stellite 6 Round Bar;
Casting Form Material: Metal;
Surface Roughness: Ra0.2;
Machining Tolerance: +/-0.10mm;
Coating: Syrup or Pulp Waste;
Density: Customed;
Tolerance: Customed;
|
