Specification |
Noise: <102dB;
Hi-Fi: Not Hi-Fi;
Activity: Passive;
Operation Mode: Wire / Remote Control;
Speaker System: Passive;
Speaker Material: Ferrite;
Application: Stage;
Monitor: None;
THD: <0.005%;
Type: High Frequency Driver;
Brand: Hipower;
Customer Satisfaction: 98%;
Performance: Stable;
Markets: Europe, Asia, North and South America;
|
Application: Commercial, Home;
THD: <0.03%;
Input: 2 Balanced/Unbalanced Input;
Input Impedance: Greater Than1800 Ω;
Max. Input Level: +8dbu@ 0dB Gain;
Output: 2 Balanced/Unbalanced Output;
Output Impedance: 200 Ohm Balance;
Max. Output Level: +20dbu Balance;
Freq. Response: 20~20kHz, ±1dB;
Power Requirements: 12V DC or Poe;
Dimensions: 123X75X35 mm;
|
Application: Commercial, Home;
THD: <0.03%;
Input: 4 Balanced/Unbalanced Input;
Input Impedance: Greater Than1800 Ω;
Max. Input Level: +8dbu@ 0dB Gain;
Output: 4 Balanced/Unbalanced Output;
Output Impedance: 200 Ohm Balance;
Max. Output Level: +20dbu Balance;
Freq. Response: 20~20kHz, ±1dB;
Power Requirements: 12V DC or Poe;
Dimensions: 123X75X35 mm;
|
Noise: Less Than -90dbu When Gain Is 0dB;
Application: Commercial, Home, Studio;
THD: Less Than 0.01%;
Microphone/Line Input: Balanced Type,3 Pin Interface with RF Filter;
Phantom Power: +48V;
Mic/Line Gain: 0dB;
Input Impedence: Greater Than 6800ohm,The Gain Can Be Set to Any Va;
Equivalent Input Noise: -115dbu(Gain:+40dB);
Maximum Input Electrical Level: +8dbu @ 0dB Gain, -16dbu @ +25dB Gain,-31dbu @ +40;
Output Type: Balance Circuit,It Will Be Mute When Loses Single;
Output Gain: 0dB;
Output S/N: Less Than -90dbu When Gain Is 0dB;
Max Output Electrical Level: +12dbu;
|
Noise: 105dB(@12dbu,1kHz,a-Wt)/Line;
Application: Commercial, Home, Studio;
Monitor: LED Status Indicators;
Input Channels: 8 Balanced. Mic/Line Level;
Connectors: 3.81 mm Phoenix Contact, 12-Pin;
Input Impedance: 11.5KΩ;
Maximum Input Level: 14dbu/Line, -7dbu/Mic;
Phantom Power: +48VDC, 10mA, Selectable Per Input;
Output Channels: 8 Balanced, Line Level;
Output Impedance: 150ohm;
Line Frequency Response: 20Hz-20kHz(+-0.5dB);
Mic Frequency Response: 20Hz-20kHz(+-1.5dB);
Line Thd+N: -90dB(@12dbu,1kHz,a-Wt);
Mic Thd+N: -86dB(@-7dbu,1kHz,a-Wt);
Line Snr: 105dB(@12dbu,1kHz,a-Wt);
Mic Snr: 95dB(@-7dbu,1kHz,a-Wt);
USB: Micro-B Type, Free Driver;
Signal Processor: Signal Processor 32-Bit Fixed/Floating-Point DSP 3;
|