Specification |
Type: Cartridge Heater;
Material: Stainless Steel +Heating Wire;
Form: Cartridge Heater;
Shape: Tubular;
Heater: SUS 304 24V 100W Cartridge Heater for 3D Printer;
Sheath Material: SUS304 for Cartridge Heater;
Wattage Tolerance: +5%, -10%;
Resistance Tolerance: +10%, -5%;
Voltages Available: 380V, 240V, 220V, 110V, 36V, 24V or 12V;
Max Operating Temp: 800;
Length Tolerance: 1 mm;
Diameter Tolerance: 0.02mm;
Standard Cold Zone: 5-10mm;
Insulation Resistance (Cold): 500;
|
Type: Electric Coil;
Material: Ni-Cr Wire;
Form: Heating Wire;
Shape: Spring;
Density: 7.1 g/cm3;
Thermal Conductivity: 46.1 Kj/M.H;
Resistivity: 1.42+/-5% Ohm/M;
Melting Point: 1500c;
Surface: Bright, Acid White, Oxidation;
Hardness: 200-260hv;
Elongation: Min12;
Working Tem: 1250c;
|
Type: Electric Coil;
Material: Fe-Cr-Al Wire;
Form: Heating Wire;
Shape: Spring;
Density: 7.1 g/cm3;
Thermal Conductivity: 46.1 Kj/M.H;
Resistivity: 1.42+/-5% Ohm/M;
Melting Point: 1500c;
Surface: Bright, Acid White, Oxidation;
Hardness: 200-260hv;
Elongation: Min12;
Working Tem: 1250c;
|
Type: Electric Heating Element;
Material: Fe-Cr-Al Wire;
Form: Heating Element;
Shape: Tubular;
Voltages Available: 24V, 36V, 110V, 220V, 230V, 240V, 380V;
Power Available: Can Be Customized;
Tube Sheath: Stainless Steel 304,321,316, Incoloy 800, Incoloy;
Tube Diameter: 8-12mm;
Tube Length: 100mm - 1000mm;
Thermocouple: K Type or J Type/ or Without;
|
Type: Flange Heating Element;
Material: Fe-Cr-Al Wire;
Form: Heating Element;
Shape: Tubular;
Voltages Available: 24V, 36V, 110V, 220V, 230V, 240V, 380V;
Power Available: Can Be Customized;
Tube Sheath: Stainless Steel 304,321,316, Incoloy 800, Incoloy;
Tube Diameter: 8mm, 10mm,12mm;
Tube Length: 100mm - 10000mm;
Thermocouple: K Type or J Type/ or Without;
|