| Specification |
Bonding Function: Structural Adhesive;
Morphology: Solvent;
Application: Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing, Industrial Coatings;
Material: Polyimide;
Classification: Room Curing;
Main Agent Composition: Polyamide;
Characteristic: Weatherability;
Promoter Composition: Curing Agent;
Composition: Organic Material;
Color: Light Yellowish Transparent Liquid;
Viscosity: 300-500;
Amine Value: 290-350;
|
CAS No.: 7085-85-0;
Formula: C3h8n2o;
EINECS: 231-545-4;
Bonding Function: High Temperature Resistant Adhesive;
Morphology: Solid-State;
Application: Woodworking, Footwear & Leather, Fiber & Garment, Sofa, Mattress, Fabric etc.;
Material: Apao;
Classification: Hot Melt;
Main Agent Composition: Natural Polymer;
Characteristic: Weatherability;
Promoter Composition: Solvent;
Composition: Organic Material;
Color: White;
Appearance: Milky White Solid;
Smell: Good Smell;
Softening Point: 120-140 Centigrade;
Melt Viscosity: 1600-3000PA.S at 70 Centigrade;
Flash Point: >392 Degrees F , 200 Centigrade;
Recommended Temperature: 165-180 Centigrade;
Shelf Life: 2 Years;
Relative Density: 0.88-0.96;
|
Formula: C4h6o2;
EINECS: 202-500-6;
Bonding Function: Normal Temperature Adhesive;
Morphology: Solvent;
Application: Automobile, Construction, Woodworking, Fiber & Garment, Packing, Motor;
Material: Epoxy;
Classification: Room Curing;
Main Agent Composition: Methacrylate;
Characteristic: Weatherability;
Promoter Composition: Solvent;
Composition: Organic Material;
Color: Red;
|
CAS No.: 4253-34-3;
EINECS: 230-391-5;
Bonding Function: Structural Adhesive;
Morphology: Solid-State;
Application: Automobile, Construction, Packing, Window, Skylight, Family Decoration etc;
Material: Silicone;
Classification: Room Curing;
Main Agent Composition: Acidity Silicone;
Characteristic: Waterproof;
Promoter Composition: Solvent;
Composition: Organic Material;
Color: Transparent, White, Black and Gray.;
Total Cured Time: 24 Hours;
Skin Cure Time: 5-20 Minutes;
Tack-Free Time: 15-30 Minutes;
Gravity: 0.98-1.1 G/Cubic Centimetre;
Sag/Slump: <=1 mm;
Extrudability: >=200 Ml/Min;
Application Temp: +5-+40 Degrees Celsius;
|
Bonding Function: Structural Adhesive;
Morphology: Creaam Liquid;
Application: Automobile, Construction, Woodworking, Fiber & Garment, Packing, Glass Sealant;
Material: Silicone;
Classification: Room Curing;
Main Agent Composition: Natural Polymer;
Characteristic: Weatherability;
Promoter Composition: Emulsifier;
Composition: Organic Material;
Color: Black, White, Grey;
|
