What is Customize High Quality Plastic Stackable Crate Container Injection M42 Mould
Price
Min. Order Reference FOB Price
1 Piece US$2,000.00-10,000.00 / Piece
Sepcifications
- Shaping Mode Injection Mould
- Surface Finish Process Polishing
- Mould Cavity Multi Cavity
- Plastic Material ABS
- Process Combination Type Single-Process Mode
- Application Car, Household Appliances, Furniture, Commodity, Electronic, Home Use, Hardware
- Runner Cold Runner
- Design Software Pro-E
- Installation Fixed
- Certification ISO
- Standard DME
- Customized Customized
- Transport Package Wood Box and Wood Pallet
- Specification According to your drawing
- Trademark Custom
- Origin Guangdong, China
- Product Name Plastic Basket Mold
- Mould Life 300K-500K Shots
- Material ABS,PP,PS,PE,PVC,PA6,PA66,PMMA
- Mould Material Nak80/P20/718/738/S136
- Process Injection Moulding
- Finish Pitting The Word, Mirror Finish, Matte Surface
- Lead Time 20~35day
- Package Wooden Case Package
Product Description
Customize High quality plastic stackable crate container injection M42 mould Plastics Injection mold makers,mold plastic injection,plastic injection mould making manufacturer Plastic Injection Mould Description Product name Multi cavity hot runner injection mould supplier Mould Material ...
-
What Are Bubbles in Injection Molded Products? In injection molding, bubbles are not a common defect in general small workshops. Bubbles mainly occur in non-large transparent products; small transparent products are not prone to bubbles, while non-transparent products typically do not have specific requirements. Today, we will focus on bubbles in injection molding as we continue our exploration of molding defects. -
What Is Injection Molding Shrinkage? Injection molding shrinkage simply refers to how much the polymers will contract during the cooling phase. During the injection molding process, molten plastic material is injected into a mold cavity under high pressure, and when the plastic material cools, it shrinks as it solidifies. This shrinkage can cause the molded part to be smaller than the intended size, and have an uneven shape known as war-page. -
What Are Sink Marks in Plastic Injection Mold? Sink marks are some kinds of depression on the surface of the plastic part due to the shrinkage of the material underneath. Sink marks most commonly occur on a surface that has ribs, bosses, and other voluminous features on the rear side of the moulding. All plastics shrink as they freeze off, some more than others. One of the things you can do during the design phase is to identify where these injection molding sink marks are going to be and choose a material that doesn’t shrink as much. Or you can even add something to the plastic material like glass fibers or you can put talcum powder in and it will mitigate the shrinkage quite a bit.