What is OEM Plastic Hexagon Shape Enclosure Toolmaker with Multi Cavity
Price
Purchase Qty. Reference FOB Price
1,000-9,999 Pieces US$0.40
10,000-49,999 Pieces US$0.38
50,000+ Pieces US$0.36
Sepcifications
- Warranty 1year
- Shaping Mode Injection Mould
- Surface Finish Process Polishing
- Mould Cavity Single Cavity
- Plastic Material ABS
- Process Combination Type Single-Process Mode
- Application Car, Household Appliances, Furniture, Commodity, Electronic, Home Use
- Runner Cold Runner
- Design Software Pro-E
- Installation Fixed
- Certification ISO
- Standard DME
- Customized Customized
- After-sales Service 24hrs Online Service
- Transport Package Wooden Cases/Air/Sea
- Specification Custom
- Trademark HOWE or Custom
- Origin China
- Name Plastic Injection Mold
- Mould Material S136, S136h, Nak80, etc
- Mold Cavity Single Cavity / Family Molds / Multi Cavity
- Mold Life Time 300,000-6000,000 Cycles
- Packing Wooden Case
- Delivery Air Cargo, Sea Shipping
Product Description
Plastic Injection molding companies Custom Precision Injection mold for plastic component Product Description Product Name OEM custom injection mould for plastic part Mold Base: LKM,HASCO,DME,etc... Product Name: UL Approved mold maker plastic injection molding Mould overmoulding Mold ...
-
What Are Bubbles in Injection Molded Products? In injection molding, bubbles are not a common defect in general small workshops. Bubbles mainly occur in non-large transparent products; small transparent products are not prone to bubbles, while non-transparent products typically do not have specific requirements. Today, we will focus on bubbles in injection molding as we continue our exploration of molding defects. -
Review Analysis of Plastic Injection Mold The plastic injection mold industry has shown a steady growth trend worldwide, mainly due to the continuous expansion of the consumer market and the improvement of people′s requirements for product quality. With the wide application of intelligent manufacturing and automation technology, the production efficiency and quality level of the injection molding industry have been significantly improved. At the same time, the increasingly strict environmental protection policies have also prompted the injection molding industry to continue to develop in the direction of green and environmental protection. -
What Are Sink Marks in Plastic Injection Mold? Sink marks are some kinds of depression on the surface of the plastic part due to the shrinkage of the material underneath. Sink marks most commonly occur on a surface that has ribs, bosses, and other voluminous features on the rear side of the moulding. All plastics shrink as they freeze off, some more than others. One of the things you can do during the design phase is to identify where these injection molding sink marks are going to be and choose a material that doesn’t shrink as much. Or you can even add something to the plastic material like glass fibers or you can put talcum powder in and it will mitigate the shrinkage quite a bit.