| Specification |
Noise: <95dB;
Hi-Fi: Hi-Fi;
Activity: Passive;
Operation Mode: Wire / Remote Control;
Speaker Material: Plywood;
Application: Outdoor Large Show;
THD: <0.005%;
|
Frequency Response(-3dB): 70Hz-18kHz;
Woofer: 2X8"(200mm)/2" Voice Coil Woofer;
Driver: 1X1.4"(36mm)/3" Voice Coil Tweeter;
Rated Power: 300W RMS, 1200W Peak;
Sensitivity: 98dB 1 Watt/1 Meter;
Impedance: 8 Ohms Nominal;
Maximum Spl: 123dB Continuous, 129dB Peak;
Dispersion(-6dB): Horizontal:100;
Crossover Frequencies: 700Hz, 1.5kHz Passive;
|
Speaker Material: Plywood;
Frequency Response(-3dB): 35Hz-150Hz;
Woofer: 2X18"(460mm)/4" Voice Coil Woofer;
Rated Power: 1200W RMS, 4800W Peak;
Sensitivity: 103dB 1 Watt/1 Meter;
Impedance: 4 Ohms Nominal;
Maximum Spl: 133dB Continuous, 139dB Peak;
|
Speaker Material: Plywood;
Frequency Response(-3dB): 35Hz-150Hz;
Woofer: 2X18"(460mm)/4" Voice Coil Woofer;
Rated Power: 1200W RMS, 4800W Peak;
Sensitivity: 103dB 1 Watt/1 Meter;
Impedance: 4 Ohms Nominal;
Maximum Spl: 133dB Continuous, 139dB Peak;
|
Noise: 6dbu and 0dbu at 94dB;
Activity: Class D Mixer Amplifier with Audio Sources, Dante;
Speaker System: Optional Combination;
Speaker Material: Metal;
Application: Commercial, Professional;
Monitor: 240*240 Res, IPS Colored;
THD: Less Than 0.1% at 1W to Full Load;
Output Power: 2*500W at 4ohm; or 1*1000W at 8ohm Bridged;
Output Power 2: 1*1000W 100V Line Bridged, 1*600W 70V Line Bridge;
Output: 100V or 4 - 16ohm, DSP Software Selectable;
Frequency Response: 20 - 20,000 Hz, +/- 0.5dB at 1W, 8ohm;
S/N Ratio: 6dbu and 0dbu at 94dB;
Input EQ: 5 Bands;
Output EQ: 9 Bands;
Cooling: Internal 12VDC Fan, Extensive Heat Sinking;
Display: 240*240 Res, IPS Colored;
Dante Interface: 2 Channel;
Power Requirements: 100-240V AC, 50/60 Hz;
Dimensions: 44.5(H) X 483(W) X 330(D) mm;
Built-in Dimensions: 1 U Rack 19 Inch;
Finish: Panel: Aluminum Plate, Black; Case: Steel Plate, B;
|
