Specification |
Type: Stamping Die Parts;
Material: Stainless Steel;
Application: Electronic, Hardware, Machinery;
|
Type: Die-Casting Mould Parts;
Material: Suj2;
Application: Electronic, Machinery, Household Applicances;
Hardness: 58-62HRC;
Standard: DIN Standard;
Usage: Plastic Injection Mould;
Product Name: Guide Pin and Guide Bush;
|
Type: Plastic Mould Parts;
Material: Metel;
Application: Electronic, Hardware, Machinery, Daily Use, Furniture, Household Applicances, Car;
Shaping Mode: Plastic Injection Mould;
Inspection: 100% Before Shipment;
Nominal Initial Force: 450n;
Max. Charging Pressure: 18MPa;
Min. Charging Pressure: 2.5MPa;
Max. Piston Rod Velocity: ≤0.8m/S;
Pressure Medium: N²;
Operating Temperature: 20~+80ºC;
Force Increased by Temperature: ±0.3%/ºC;
Max. Recommended Strokes/Min: 6~60times/Min;
|
Type: Plastic Mould Parts;
Material: Metel;
Application: Electronic, Hardware, Machinery, Daily Use, Furniture, Household Applicances, Car;
Shaping Mode: Plastic Injection Mould;
Nominal Initial Force: 750n;
Max. Charging Pressure: 18MPa;
Min. Charging Pressure: 2.5MPa;
Max. Piston Rod Velocity: ≤0.8m/S;
Pressure Medium: N²;
Operating Temperature: 20~+80ºC;
Force Increased by Temperature: ±0.3%/ºC;
Max. Recommended Strokes/Min: 6~60times/Min;
Inspection: 100% Before Shipment;
|
Type: Plastic Mould Parts;
Material: Metel;
Application: Electronic, Hardware, Machinery, Daily Use, Furniture, Household Applicances, Car;
Shaping Mode: Plastic Injection Mould;
Nominal Initial Force: 1700n;
Max. Charging Pressure: 18MPa;
Min. Charging Pressure: 2.5MPa;
Max. Piston Rod Velocity: ≤0.8m/S;
Pressure Medium: N²;
Operating Temperature: 20~+80ºC;
Force Increased by Temperature: ±0.3%/ºC;
Max. Recommended Strokes/Min: 6~60times/Min;
Inspection: 100% Before Shipment;
|