Specification |
CAS No.: 70131-67-8;
Formula: Ho[(CH3 ) 2 Sio]Nh;
Appearance: Liquid;
Usage: Oil Drilling Auxiliary Agent, Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Leather Auxiliary Agents, Electronics Chemicals;
Color: Transparent, Colorless;
Classification: Chemical Auxiliary Agent;
Other Names: Oh Terminated Polydimethylsiloxane;
Purity: 100%;
Product Standard: GB/T 27570-2011;
Oh Content: 9.0%-9.5%;
pH Value: 6.5-7.5;
Density(25ºC)/(g/cm3 ): 0.97;
|
CAS No.: 63148-62-9;
Formula: [-Si(CH3)2o-]N;
EINECS: 203-492-7;
Appearance: Liquid;
Usage: Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Leather Auxiliary Agents, as Defoamer/Lubricant/Mold Release Agent/Coating O;
Color: Colorless Transparent;
Shelf Life: 36 Months;
Storage: Be Stored in Closed Containers;
Characteristic: Oil Liquid;
Applications 1: Machine & Textile & Paint;
Applications 2: Medicine & Personal Care & Food;
Key Feature 1: Ease of Application and Rubout;
Key Feature 2: Enhances Color;
Key Feature 3: High Water Repellency;
Key Feature 4: High Spreadability and Compatibility;
Key Feature 5: Low Environmental Hazard;
Key Feature 6: Essentially Odorless, Tasteless and Nontoxic;
Use as 1: Defoamer;
Use as 2: Lubricant;
Use as 3: Mold Release Agent;
Use as 4: Coating of Insulation, Dust/Mould Proof;
|
Appearance: Liquid;
Usage: Rubber Auxiliary Agents, Plastic Auxiliary Agents, Textile Auxiliary Agents, Leather Auxiliary Agents;
Color: White;
Active Content: 60%;
Specific Gravity: 0.98;
pH: 6-8;
Freeze Thaw Stability: 5 Cycles;
Emulsion Stability: up to 50°c;
Dilution Stability: up to 2% in Water;
Feature 1: Nonionic Emulsion;
Feature 2: General Purpose Release Agent;
Feature 3: Provide Gloss and Water Repellency;
Particle Size: 90 ~ 800;
General Use 1: as Release/Lubricant;
General Use 2: as Fabric Finish Agent;
Typical Application 1: Mold Release of Rubber/Plastic Parts;
Typical Application 2: as Ingredient for Car/Furniture Polish;
Typical Application 3: Textile Lubricant;
|
Appearance: Liquid;
Usage: Soft Metal Mold Release Agent;
Color: Transparent Colorless;
Viscosity (Cst, 25ºC): 1000~1500;
Refractive Index (25ºC): 1.4650;
Specific Gravity (25/25 ºC): 0.91;
Active Content (%): 100;
Key Feature 1: Bright Release Product Surface;
Key Feature 2: No Carbonated on The Mold Surface;
Key Feature 3: Won't Affect The Secondary Painting and Finishing;
Instruction 1: Emulsify or Dilute to 0.5~5.0% Before Use;
Typical Application 1: Release Agent;
Typical Application 2: as Aluminum Die Casting Release Agent;
Typical Application 3: as Zinc Die Casting Release Agent;
Typical Application 4: as Magnesium Die Casting Release Agent;
Typical Application 5: No Affect The Secondary Painting and Finishing;
|
Appearance: Liquid;
Usage: Silicone Water Repellent;
Color: White;
Viscosity (Cst, 25ºC): Approx. 12;
Active Content: 40%;
Density: 0.95g/cm3;
pH: Approx. 8;
Key Feature 1: Good Depth of Penetration;
Key Feature 2: Resistance to Alkalis;
Key Feature 3: Rapid Development of Water Repellency;
Key Feature 4: Provide Good Adhesoin for Paints;
Key Feature 5: Water Based and Enviromentally Friendly;
Typical Application 1: for Absorbent Mineral Substrates Waterproof;
Typical Application 2: Good for Inplant Impregnation of Building Material;
Typical Application 3: Water-Repellent Primer for Emulsion Paint/Plaster;
Typical Application 4: as Silicone Resin Emulsion Paint Waterproof Primer;
Typical Application 5: as Silicone Resin Plaster Waterproof Primer;
Typical Application 6: Mass Treatment of Nonload Bearing Concrete Product;
|