Specification |
Application: Hot Pressing Graphite Die for Diamond Wheel;
Material: 99.9% High Purity Graphite;
Demoulding: Automatic;
Surface Treatment: Heat Treatment;
Using Hardness: >HRC45;
Average Wall Thickness: >3mm;
Mould Life: <500,000 shots;
Customized: Customized;
Condition: New;
Density: 1.75-1.9 G/Cm³;
Resistivity: Less Than 18;
Compressive Strength: 40-80 MPa;
Porosity: Less Than 26 %;
Elasticity Modulus: 6-18 Gpa;
Thermal Expansion Coefficient: 1.47-4.25;
Ash Content: Less Than 0.5 %;
Temperature Resistance: ≤4350ºC;
|
Warranty: 2years;
Application: Car, Household Appliances, Home Use, Electronic, Hardware;
Material: Stainless Steel;
Demoulding: Automatic;
Surface Treatment: Surface Modification;
Using Hardness: >HRC45;
Average Wall Thickness: >3mm;
Mould Life: >1,000,000 shots;
Customized: Customized;
Condition: New;
|
Warranty: 1years;
Application: Car, Household Appliances, Home Use, Electronic, Hardware;
Material: Stainless Steel;
Demoulding: Automatic;
Surface Treatment: Surface Modification;
Using Hardness: >HRC45;
Average Wall Thickness: >3mm;
Mould Life: >1,000,000 shots;
Customized: Customized;
Condition: New;
|
After-sales Service: 24-Hour Service;
Warranty: 3 Years;
Application: Car, Household Appliances, Home Use, Electronic, Hardware, Commodity;
Material: Steel;
Demoulding: Slide;
Surface Treatment: Heat Treatment;
Using Hardness: HRC30~45;
Average Wall Thickness: Customized;
Mould Life: >1,000,000 shots;
Customized: Non-Customized;
Condition: New;
|
Application: Hardware;
Surface Treatment: Surface Modification;
Mould Life: <500,000 shots;
Customized: Customized;
Condition: New;
Type: Die-Casting Mold,Injection Mold,Sheet Metal Mold;
Life Time: Zinc Alloy:300K Times; Injection Molding:500K Time;
Tolerance: -0.05mm~+.05mm;
Mold Lead Time: 25-30days;
MOQ: 1;
|