Specification |
Application: Aviation, Electronics, Industrial, Medical, Chemical;
Standard: JIS, GB, DIN, BS, ASTM, AISI;
Purity: >99.95%;
Alloy: Alloy;
Shape: Round;
Type: Ball;
|
Application: Industrial;
Standard: JIS, GB, DIN, AISI;
Purity: >98%;
Alloy: Alloy;
Shape: Round;
Type: Cemented Tungsten Carbide Rods;
Surface: Sintered;
Grinding: H6 Ground;
Produdction Method: Extrusion or Cold Isostic Pressing;
Length: Full Length 12", 13", 14", 300mm,310mm, 320,330;
Coolant Hole: 1 2 3 Coolant Holes, Sraight or Helical;
Tolerance: H4, H5, H6, H7 Standard;
Run-out: 0.05mm;
Grade: Submicron, Micron, Ultra Fine, Nano Grain Size;
Grinding Machines: Imported Centerless Grinding Machines;
Usage: End Mills, Drill Bits, Reamers, Taps, Punches;
|
Application: Industrial;
Standard: JIS, GB, DIN, AISI;
Purity: >98%;
Alloy: Alloy;
Shape: Round;
Type: Cemented Tungsten Carbide Rods;
Surface: Sintered;
Grinding: H6 Ground;
Produdction Method: Extrusion or Cold Isostic Pressing;
Length: Full Length 12", 13", 14", 300mm,310mm, 320,330;
Coolant Hole: 1 2 3 Coolant Holes, Sraight or Helical;
Tolerance: H4, H5, H6, H7 Standard;
Run-out: 0.05mm;
Grade: Submicron, Micron, Ultra Fine, Nano Grain Size;
Grinding Machines: Imported Centerless Grinding Machines;
Usage: End Mills, Drill Bits, Reamers, Taps, Punches;
|
Application: Industrial;
Standard: JIS, GB, DIN, AISI;
Purity: >98%;
Alloy: Alloy;
Shape: Round;
Type: Cemented Tungsten Carbide Rods;
Surface: Sintered;
Grinding: H6 Ground;
Produdction Method: Extrusion or Cold Isostic Pressing;
Length: Full Length 12", 13", 14", 300mm,310mm, 320,330;
Coolant Hole: 1 2 3 Coolant Holes, Sraight or Helical;
Tolerance: H4, H5, H6, H7 Standard;
Run-out: 0.05mm;
Grade: Submicron, Micron, Ultra Fine, Nano Grain Size;
Grinding Machines: Imported Centerless Grinding Machines;
Usage: End Mills, Drill Bits, Reamers, Taps, Punches;
|
Application: Industrial;
Standard: JIS, GB, DIN, AISI;
Purity: >98%;
Alloy: Alloy;
Shape: Round;
Type: Cemented Tungsten Carbide Rods;
Surface: Sintered;
Grinding: H6 Ground;
Produdction Method: Extrusion or Cold Isostic Pressing;
Length: Full Length 12", 13", 14", 300mm,310mm, 320,330;
Coolant Hole: 1 2 3 Coolant Holes, Sraight or Helical;
Tolerance: H4, H5, H6, H7 Standard;
Grade: Submicron, Micron, Ultra Fine, Nano Grain Size;
Grinding Machines: Imported Centerless Grinding Machines;
Usage: End Mills, Drill Bits, Reamers, Taps, Punches;
|