Specification |
Controlling Mode: Manual;
Warranty: 12 Months;
Customized: Customized;
Condition: New;
Product Name: China Engine Lathe;
Spindle Bore: 38mm;
Top Slide Travel: 100mm;
Cross Slide Travel: 160mm;
Width of Bed: 160mm;
Motor: 1100W/220V/50Hz(110V/60Hz);
Net Weight: 250kg;
Taper of Spindle Bore: Mt.5;
3-Jaw Chuck: 1 Set;
4-Jaw Chuck: 1 Set;
Digital Redout: 1 Set;
|
After-sales Service: Provide;
Carving Material: Stainless Steel;
Controlling Mode: CNC;
Main Axle Rotational Speed: ≤24000rpm;
Milling Cutter Diameter: 3.175, 4, 6, 8, 10, 12.7mm;
Feeding Height: 200mm;
Warranty: 24 Months;
Customized: Customized;
Condition: New;
Spindle Power: 3.0kw / 5.5kw / 7.5kw;
Inverter: Fuling / Delta Brand;
Motor and Drive: Servo Motor and Drivers;
Transmission: Taiwan Tbi Ball Screw;
Guide Rails: Taiwan Hiwin Square Rails;
Control System: Original Ncstudio / Tk100 / Nk280 / Syntec;
Software: Artcam;
Working Speed: 8-15m /Min;
Machine Bed: The Whole Cast Iron Bed, Heavy-Duty;
|
After-sales Service: Provide;
Carving Material: Metal Alloy;
Controlling Mode: CNC;
Main Axle Rotational Speed: ≤24000rpm;
Milling Cutter Diameter: 3.175, 4, 6, 8, 10, 12.7mm;
Feeding Height: 200mm;
Warranty: 24 Months;
Customized: Customized;
Condition: New;
Spindle Power: 3kw Water Cooling Spindle;
Spindle Speed: 0-24000rpm/Min;
Oil Lubrication System: Automatic;
Operating System: DSP / Nc-Studio / Tk100;
Inverter: Detla Inverter;
Software: Artcam Software;
Guide Rail: Taiwan Hiwin;
Ball Screw: Taiwan Tbi;
Tool Holder: Er20;
Working Speed: 8-15m/Min;
Table Structure: Movable T-Slot Cast Iron;
|
Carving Material: Metal;
Controlling Mode: CNC;
Main Axle Rotational Speed: ≤24000rpm;
Feeding Height: 200mm;
Warranty: 12 Months;
Customized: Customized;
Condition: New;
Motor and Driver: Stepper Motor and Leadshine Driver;
X,Y,Z Working Area: 300*400*150mm;
Limit Switch: Omron;
Inverter: Delta;
Spindle Power: 2.2kw Water Cooling Spindle;
Spindle Speed: 0-24000rpm;
Tool Sensor and Lubrication: with;
X, Y,Z Structure: Hiwin Guide Rail and Tbi Ball Screw;
Frame: Cast by Iron;
Operating System: Nc Studio;
|
After-sales Service: Provide;
Carving Material: Stainless Steel;
Controlling Mode: CNC;
Main Axle Rotational Speed: ≤24000rpm;
Milling Cutter Diameter: 10mm;
Feeding Height: 200mm;
Warranty: 24 Months;
Customized: Customized;
Condition: New;
Controller: DSP or Tk100 or Syntec Controller;
Motor: Servo Motor;
Spindle Power: 3.0kw Water Cooling Spindle;
Transmission Way: Rack Gear;
Working Area: 400* 400* 200mm;
Software: Artcam / Mastercam;
Guide Rail: Taiwan Hiwin Square Guide Rail;
Table: Movable T-Slot Table;
Inverter: Fuling / Delta Inverter;
Working Speed: 8-15m /Min;
|