| Specification |
Working Pressure: 300psi;
Material: Ductile Iron;
Surface Finish: Epoxy Coating;
|
Material: Ss 304, 316, 304L, 316L;
Branch Pecification: 2-13 Branches;
Length: 200mm-2000mm;
Nominal Diameter: Dn20-Dn50 or as Your Drawing;
Wall Thickness: 1.5mm - 3mm;
The Branch Spacing: 50mm or as Your Drawing;
Apply Pressure: <=1.2MPa Pressure Applicable;
Media: Water;
Component Part: Manifold, Filter, Valves, Union,Nipple,Heat Meter;
Optional Surface: Flash Silver, Fine Polishing,etc;
|
Material: Hpb,, Ss 304, 316, 304L, 316L, Copper, etc;
Threaded Both Ends: Articulated G1 Internal Thread;
Temperature Control Range: 5~85 Degree Centigrade;
Temperature Accuracy: 2~3 Degree Centigrade;
Temperature of The Factory Settings: 40~45 Degree Centigrade;
Heating Area: About 200 Square Meters;
Working Pressure: <10MPa Pressure Applicable;
Pump Power Head: 220V, 100V, 6m;
Nominal Diameter: Dn20-Dn50 or as Your Drawing;
Wall Thickness: 1.5mm - 3mm;
|
Material: Ss 304, 316, 304L, 316L, Copper, etc;
Branch Pecification: 2-12 Branches;
Length: 200mm-2000mm;
Nominal Diameter: Dn20-Dn50 or as Your Drawing;
Wall Thickness: 1.5mm - 3mm;
The Branch Spacing: 50mm or as Your Drawing;
Apply Pressure: ≤1.2MPa Pressure Applicable;
Media: Water;
Component Part: Manifold, Filter, Valves, Union,Nipple,Heat Meter;
Function: Pressure Boost, Pressure Reduction, Stabilivolt, W;
|
Material: Ss 304, 316, 304L, 316L, Copper, etc;
Branch Pecification: 2-12 Branches;
Length: 200mm-2000mm;
Nominal Diameter: Dn20-Dn50 or as Your Drawing;
Wall Thickness: 1.5mm - 3mm;
The Branch Spacing: 50mm or as Your Drawing;
Apply Pressure: ≤1.2MPa Pressure Applicable;
Media: Water;
Component Part: Manifold, Filter, Valves, Union,Nipple,Heat Meter;
Function: Pressure Boost, Pressure Reduction, Stabilivolt, W;
|
