Specification |
Application: Turbine Oil, Lubricant Oil, Hydraulic Oil;
Voltage: According to Demand220V/380/440V;
Folw Rate: 200 L/min;
Fuction 1: Vacuum Oil Dehydration;
Fuction 2: Multistage Oil Filtering;
Fuction 3: Oil Emulsion Breaking;
Fuction 4: Turbine Oil Filtration;
Power Supply: 380V, 3phase, 50Hz or as Required;
Color: Green, Blue, Grey, White, Yellow etc.;
Machine Body Material: Carbon Steel;
|
Application: Biodiesel Oil, Cooking Oil, Turbine Oil, Lubricant Oil, Transformer Oil, Engine Oil, Diesel Oil;
Voltage: 380V;
Folw Rate: 10 to 100 Ton Per Day;
Other Raw Material Oil: Used Engine Oil, Heavy Oil, Waste Oil;
Main Process Unit: Atmospheric and Vacuum Distillation Unit;
Auxiliary Process Unit: Catalytic Cracking Unit;
Auxiliary Refining Unit: Solvent Refining Unit;
Heating Fuel: Fuel Oil, Petroleum Gases;
Working Type: Continuous;
Heating Device: Tube Furnace;
End Products: Diesel, Gasoline, Petroleum Gases, Asphalt;
Tail Gases Recovery: Included;
Online Technical Support: Whole Life;
on-Site Technical Support: Engineers Overseas Available;
Equipment Materials: Stainless Steel/Alloy Steel/Q235 Steel;
Max Process Temperature: 450 Degree Celsius or Customization;
Control Method: PLC or Dcs Automatic Control;
Catalyst Regeneration: Available;
|
Application: Biodiesel Oil, Cooking Oil, Turbine Oil, Lubricant Oil, Transformer Oil, Engine Oil, Diesel Oil;
Voltage: 380V;
Folw Rate: 10 to 100 Ton Per Day;
Other Raw Material Oil: Used Engine Oil, Heavy Oil, Waste Oil;
Main Process Unit: Atmospheric and Vacuum Distillation Unit;
Auxiliary Process Unit: Catalytic Cracking Unit;
Auxiliary Refining Unit: Solvent Refining Unit;
Heating Fuel: Fuel Oil, Petroleum Gases;
Working Type: Continuous;
Heating Device: Tube Furnace;
End Products: Diesel, Gasoline, Petroleum Gases, Asphalt;
Tail Gases Recovery: Included;
Online Technical Support: Whole Life;
on-Site Technical Support: Engineers Overseas Available;
Equipment Materials: Stainless Steel/Alloy Steel/Q235 Steel;
Max Process Temperature: 450 Degree Celsius or Customization;
Control Method: PLC or Dcs Automatic Control;
Catalyst Regeneration: Available;
|
Application: Transformer Oil;
Voltage: 380V;
Folw Rate: 300L/Min;
Flow Rate: 18000L/H;
Type: Double Stange Vacuum Purification Machine;
Residual Water After Treatment: Not More Than 3ppm;
Impurity Size After Treatment: Not More Than 1-3 Micron;
Residual Gas After Treatment: Not More Than 0.05%;
Breakdown Voltage After Treatment: Not Less Than 75kv;
Oils Can Be Treated: Insulating Oil, Transformer Oil, etc.;
|
Application: Transformer Oil;
Voltage: 220V;
Folw Rate: 2L/Min;
Flow Rate: 2L/Min;
Work Pressure(Kgf/ Cm2) Degree: 1.5-3.0;
Motor: Single Phase 1/2HP;
Application Oil Tank (L): 1000;
Viscosity Range: 9~180cst;
Use of The Number Offilter Element: 2;
Inlet/Outlet Diameter (mm): 10;
Temperature Range: 0~80°c;
|