Specification |
Constant of Sensor: K=1.0;
Compressive Strength: 0.6MPa;
Material: 316L Titanium Alloy;
Connection: 1/2 or 3/4 Thread Installation;
Measuring Range: 0-2000us/Cm;
|
Barrel Inlet Size: Diameter 200mm;
Power Voltage: 5-24V DC 12-24V DC;
Output Signal 1: Voltage Signal;
Output Signal 2: Current Signal;
Output Signal 3: Pulse Signal;
Output Signal 4: RS485;
Rainfall collector: 200mm;
Accuracy: ±3%;
Environment temperature: -10-50ºC;
Size: 216*460mm;
Electrical connections: Direct Lead;
|
Detection Size: 1.0-10μm;
Concentration Range: 0-999μG/M3;
Source Voltage: 4.9/5/5.1V;
Current: 70mA;
Response Time: 0-10s;
Operating Temperature: -10~60ºC;
Accuracy(0~100 Ug/M3): ±10μG/M3;
Accuracy(≥100 Ug/M3): ±10%μG/M3;
Storage Humidity (Non-Condensing): 0-90%Rh;
Operating Humidity (Non-Condensing): 5-80%Rh;
|
Aplication: Load Cell,Stress Analysis,Force Measure;
Strain Gauge Type: Foil Type;
Base Material: Phenolphthalein-Oxygen,Polyimide,Phenolic Resin;
Grid Material: Konstantan,Kama Foil;
Lead Wire: Enameled Wire,Length Can Be Customized;
Model to Select: Bf350-2bb,Bf350-3bb;
Accessories: Solder Pad,Lead Wire,Glue,Can Be Choosen;
Applied Material: Aluminum,Steel;
Resistance: 350ohm,1000ohm;
|
Measuring Principle: Dual Wavelength Ultraviolet Absorption Method;
Cod Measuring Range: 0-100mg/L Equiv. Khp;
Turbidity Range: 0-100ntu;
Calibration Method: Two-Point Calibration;
Output Method: RS-485 Bus, Modbus/RTU Protocol;
Power Supply: 12VDC±10%;
Power Consumption: <0.5W;
Working Conditions: 0-45ºC, <0.2MPa;
Storage Temperature: -5-65ºC;
Protection Level: IP68;
|