| Specification |
CAS No.: 63231-66-3;
Formula: [CH2-Chcl-CH2-CH2]N;
EINECS: No;
Appearance: Powder;
Usage: Rubber Auxiliary Agents, Plastic Auxiliary Agents;
Color: White;
Product: Chlorinated Polyethylene;
Size: CPE 135A 135b;
HS: 39019090;
Application: PVC or Other Plastic/Rubber Products;
Package: 25kg/Bag, 500kg/Bag, 750kg/Bag, 1000kg/Bag;
MOQ: 1ton;
OEM: Yes;
ODM: Yes;
Annual Output: 50000ton;
Chlorine Content %: 35±1;
Heat of Fusion J/G ≤: 2;
Volatile Matter %≤: 0.3;
Hardness Shore a ≤: 60;
Tensile Strength MPa ≥: 8;
Elongation at Break % ≥: 700;
|
CAS No.: 82628-87-3;
Appearance: Liquid;
Usage: Oil Drilling Auxiliary Agent, Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Leather Auxiliary Agents, Electronics Chemicals;
Color: White;
Specific Gravity: 0.98;
Active Content: 60%;
pH: 6-8;
Freeze Thaw Stability: 5 Cycles;
Emulsion Stability: up to 50°c;
Dilution Stability: up to 2% in Water;
Feature 1: Nonionic Emulsion;
Feature 2: General Purpose Release Agent;
Feature 3: Provide Gloss and Water Repellency;
Particle Size: 90 ~ 800;
General Use 1: as Release/Lubricant;
General Use 2: as Fabric Finish Agent;
Typical Application 4: Mold Release of Rubber/Plastic Parts;
Typical Application 5: as Ingredient for Car/Furniture Polish;
Typical Application 6: Textile Lubricant;
|
Appearance: Liquid;
Usage: Silicone Water Repellent;
Color: White;
Viscosity (Cst, 25ºC): Approx. 12;
Active Content: 40%;
Density: 0.95g/cm3;
pH: Approx. 8;
Key Feature 1: Good Depth of Penetration;
Key Feature 2: Resistance to Alkalis;
Key Feature 3: Rapid Development of Water Repellency;
Key Feature 4: Provide Good Adhesoin for Paints;
Key Feature 5: Water Based and Enviromentally Friendly;
Key Feature 6: Stable in Storage, Even When Duilted;
Typical Application 1: for Absorbent Mineral Substrates Waterproof;
Typical Application 2: Good for Inplant Impregnation of Building Material;
Typical Application 3: Water-Repellent Primer for Emulsion Paint/Plaster;
Typical Application 4: as Silicone Resin Emulsion Paint Waterproof Primer;
Typical Application 5: as Silicone Resin Plaster Waterproof Primer;
|
Appearance: Liquid;
Usage: Coating Auxiliary Agents, Textile Auxiliary Agents, Leather Auxiliary Agents, Silicone Waterproof;
Color: Milky White;
Active Content: (40-60)%;
Density: 1.00 ± 0.05;
pH: 6 ~8;
Stability (3000r/Min): 15min Non-Stratifie;
Key Feature 1: High Spreading and Wetting Capabilities;
Key Feature 2: Permeability to Gas and Water Vapor;
Key Feature 3: Resistance to Ultraviolet Light (UV), Heat;
Key Feature 4: Resistance to Oxidative Degeneration;
Key Feature 5: Durability and Mechanical and Chemical Adhesion;
Typical Application 1: Waterproof Coating for Roof Masonry Clay Products;
Typical Application 2: Waterproof Coating for Timber and etc;
Typical Application 3: Waterproof Elastomeric Coatings for Industrial;
Typical Application 4: Waterproof Elastomeric Coating for Fashion Textile;
Typical Application 5: Additives to Wash-off Resistance of Beauty Product;
Typical Application 6: Additives to Wash-off Resistance of Personal Care;
|
Appearance: Liquid;
Usage: Coating Auxiliary Agents, Silicone Water Repellent;
Color: Colorless Transparent;
Viscosity (Cst, 25ºC): 23;
Hydrogen Content, %: 1.58;
pH Value: 6.5;
Volatile Content (150 ºC, 3h, %): <1.5;
Flash Point (Closed Cup, ºC): >160;
Typical Application 1: Impart Water Repellent Surface;
Typical Application 2: Reduce Water Absorpt;
Typical Application 3: Use on Power Glass Ceramic Leather;
Typical Application 4: Use on Paper Metal Cement Marble;
Typical Application 5: Usually Applied From Dilute Solution;
Key Feature 1: Adjustable Curing Time and Temperature;
Key Feature 2: Reduce Water Absorption Increase Substrate Life;
Key Feature 3: Non-Toxic;
Key Feature 4: Produces a Durable Film After Curing;
Key Feature 5: Effective Concentration as Low as 0.2%;
|
