| Specification |
Function: Automatic Control, Protection, Monitoring, Measurement;
|
Task: Program;
Structure: Combination;
Mathematical Model: Non-Linear;
Signal: Continuous;
Function: Automatic Control;
Condition: New;
Customized: Non-Customized;
Material: Circuit Board + Engineering Plastics;
Canopen Baud Rate Supports: 1000K 500K 250K 125K 100K 50K 10K;
Terminal Modules: up to 32 Bus Terminal Modules;
Can Interface: One Open 4 Terminal;
Supply Power: 24V DC (-15%/+20%);
Input Current: 70mA Total Gc-Bus Current Maximum 2.5A;
Electrical Isolation: 1500 Vrms;
Pdo Mode Supports: Synchronization Looping Event-Driven Polling;
Configuration Mode: Automatic Configuration;
Starting Current: About 2.5 Times Continuous Current;
IP Grade: IP 20;
|
Task: Program;
Structure: Combination;
Mathematical Model: Linear;
Signal: Continuous;
Function: Automatic Control, Protection, Monitoring, Measurement;
Condition: New;
Customized: Customized;
Material: PC/ABS;
Alias: Control Box;
Internal Ignition Transformer Parameters: 8kv -16 Ma;
Applicable Fuel: Gas, Fuel;
Structural Style: Mechanical;
|
Task: Adjust;
Structure: Combination;
Mathematical Model: Linear;
Signal: Continuous;
Function: Automatic Control, Protection, Monitoring, Measurement;
Condition: New;
Customized: Customized;
Low Voltage: 0.4kv~1.14kv;
Input Current: Less Than 800A, 5000A by CT;
Protocol: Modbus-RTU, Profibus-Dp, Profinet, Modbus-TCP, Wif;
Measure: Voltage, Current, Power, Harmonic, Temperature;
Protect: Over&Under Load and Voltage&Power, Short Circuit;
|
Task: Program;
Structure: Closed-Loop;
Mathematical Model: Non-Linear;
Signal: Discrete;
Function: Automatic Control, Protection, Monitoring, Measurement;
Condition: Used;
Customized: Non-Customized;
Material: Aluminum Alloy;
Product Name: Copper Bonded Steel Ground Rod;
Ground Rod Material: Copper Bonded Steel;
Standard: UL 467;
Copper Layer Thickness: >=0.254mm;
Tensile Strength: >=580nm/mm;
Length: 1.2m~3.0m(4FT~10FT);
Copper Grade: 99.9%;
Normal Diameter: 3/8".1/2". 5/8". 3/4". 1";
Process: Electroplating;
Application: Grounding System;
Copper Thickness: 50micro to 254micron;
Custom Length: 1200mm,1500mm,1800mm,2100mm,2400mm,3000mm;
Other Standard: BS En 50164-2,BS 7430;
Purity: 99.9% Electronic Copper and Low Carbon Steel;
Surface Treatment: Hot DIP Galvanized;
|
