Specification |
Casting Method: Thermal Gravity Casting;
Process: Lost Wax Casting;
Molding Technics: Gravity Casting;
Application: Machinery Parts;
Material: Steel/Stainless Steel/Alloy Steel, etc.;
Surface Preparation: According to Custom Requirements;
Surface Roughness: According to Custom Requirements;
Machining Tolerance: +/-0.01mm or as Your Requirements;
Standard: ASTM, AISI, DIN, BS, ANSI, JIS, NF, AAR, GB, GOST;
QA: CMM, Spectrometer, X-ray Machine, etc.;
Service: OEM/ODM;
|
Casting Method: Vacuum Casting;
Process: Lost Wax Casting;
Molding Technics: Silica Sol Process;
Application: Turbojet Engine;
Material: Inconel713c;
Surface Preparation: Sand Blast;
Surface Roughness: Ra3.2;
Machining Tolerance: +/-0.01mm;
Standard: ASTM;
Tensile Test Temperature: Above 900 Degree;
Tensile Strength of High Temperature: Above 830MPa;
Elongation of High Temperature: Above 3%;
Persistent Creep Temperature at High Tem: Above 975 Degree;
Creep Tensile Strength at High Temperatu: Above 225MPa;
High Temperature Duration: Above 40h;
Test of Surface Defect: Fpt;
Test of Internal Defect: X-ray;
Test of Size: CMM;
|
Casting Method: Vacuum Casting;
Process: Lost Wax Casting;
Molding Technics: Silica Sol Process;
Application: Turbojet Engine;
Material: Inconel713c;
Surface Preparation: Sand Blast;
Surface Roughness: Ra3.2;
Machining Tolerance: +/-0.01mm;
Standard: ASTM;
Tensile Test Temperature: Above 900 Degree;
Tensile Strength of High Temperature: Above 830MPa;
Elongation of High Temperature: Above 3%;
Persistent Creep Temperature at High Tem: Above 975 Degree;
Creep Tensile Strength at High Temperatu: Above 225MPa;
High Temperature Duration: Above 40h;
Test of Surface Defect: Fpt;
Test of Internal Defect: X-ray;
Test of Size: CMM;
|
Casting Method: Vacuum Casting;
Process: Lost Wax Casting;
Molding Technics: Silica Sol Process;
Application: Turbojet Engine;
Material: Inconel713c;
Surface Preparation: Sand Blast;
Surface Roughness: Ra3.2;
Machining Tolerance: +/-0.01mm;
Standard: ASTM;
Tensile Test Temperature: Above 900 Degree;
Tensile Strength of High Temperature: Above 830MPa;
Elongation of High Temperature: Above 3%;
Persistent Creep Temperature at High Tem: Above 975 Degree;
Creep Tensile Strength at High Temperatu: Above 225MPa;
High Temperature Duration: Above 40h;
Test of Surface Defect: Fpt;
Test of Internal Defect: X-ray;
Test of Size: CMM;
|
Casting Method: pressure Crystallization;
Process: Precision Casting;
Molding Technics: Low Pressure Casting;
Application: Refrigerant Compressor;
Material: Aluminum A356;
Surface Preparation: Sand Blast;
Surface Roughness: Ra1.6;
Machining Tolerance: +/-0.01mm;
Standard: ASTM;
Elongation: 3.5%;
Tensile Strength: 280MPa;
Yield: 220MPa;
Dynamic Balance: G1;
Overspeed: 20000;
Coaxiality: 0.02;
Rotate Speed: 18000rpm;
Hardness: Hb92;
Weight: 3kg;
Heat Treatment: T6;
Service: OEM;
|