| Specification |
Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor, Switch Baseplate;
Type: Insulation Film;
Chemistry: Organic Insulation;
Material: Resin;
Classification: Organic Insulating Material;
Color: Yellow;
Brand: Wanda;
Thickness: 25μm;
Cerification: ISO9001, ISO14001, ISO45001;
Tensile Strength: ≥165;
Elongation: ≥40;
Electric Strength: ≥235;
Shrinkage Rate: ≤1.2;
|
Application: Winding Wire Coating Insulation, Enameled Wire Insulation Varnish;
Type: Insulation Varnish;
Chemistry: Polyesterimide;
Material: Polyesterimide Insulating Enamel;
Thermal Rating: 220 220;
Color: Customized According to Customer Requirements;
Brand: Swan;
Solid Content: 28 to 44(1g/1h/180ºC);
Recomd. Wire Size: 0.1mm to 3.5mm;
Recomd Coating Method: Via Felt or Die;
|
Application: Winding Wire Coating Insulation, Enameled Wire Insulation Varnish;
Type: Insulation Varnish;
Chemistry: Polyesterimide;
Material: Polyesterimide Insulating Enamel;
Thermal Rating: 220 220;
Color: Customized According to Customer Requirements;
Brand: Swan;
Solid Content: 28 to 44(1g/1h/180ºC);
Recomd. Wire Size: 0.1mm to 3.5mm;
Recomd Coating Method: Via Felt or Die;
|
Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor, Insulating Varnish, Switch Baseplate;
Type: Heat Shrink Tubing;
Chemistry: Hybrid Insulation;
Material: Fluoropolymer;
Thermal Rating: 200 200;
Maximum Voltage: <10KV;
Classification: Hybrid Insulation Materials;
Color: Natural Clear;
Brand: Ept;
Other Application: Office Machinery,Printing,Dyeing Machinery;
|
Application: Electrical Winding Insulation, Electrical Base, Shell;
Type: XLPE Compound;
Chemistry: Cross-Link;
Material: Polyolefin;
Classification: XLPE Compound;
Color: Customized According to Customer Requirements;
Brand: Swan;
Hardness (Shore D): 62±2;
Elongation at Break Before Irradiation: 300%;
Tensile Strength Before Irradiation: 15.0MPa;
Appearance: 4X 3 mm;
Gel Content: ≥60;
Tensile Strength: ≥13.5;
Elongation at Break: ≥350;
Brittleness Temperature: ≤15;
Hot Set Elongation Elongation Under Load: ≤80;
Permanent Deformation After Cooling: ≤5;
Change of Tensile Strength: ≤±20;
Change of Elongation: ≤±20;
DC Volume Resistivity (20ºC): ≥1.0X1014;
Dielectric Strength(20ºC): ≥25;
|
