| Specification |
Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor, Switch Baseplate;
Type: Solid;
Chemistry: Inorganic Insulation;
Material: Paper;
Thermal Rating: H 180;
Maximum Voltage: <10KV;
Classification: Inorganic Insulation Material;
Color: Nature Beige;
Brand: Chr;
Thickness: 0.20mm-0.40mm;
Width: 914mm;
Form: in Rolls;
Storage Life: 1 Year;
Delivery Time: 20days;
|
Application: Winding Wire Coating Insulation, Enameled Wire Insulation Varnish;
Type: Insulation Varnish;
Chemistry: Polyurethane;
Material: Polyurethane Insulating Enamel;
Thermal Rating: F 155;
Color: Customized According to Customer Requirements;
Brand: Swan;
Solid Content: 22 to 35(1g/1h/180ºC);
Recomd. Wire Size: 0.02mm to 1.6mm;
Recomd Coating Method: Via Felt or Die;
|
Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor;
Type: Insulation Film;
Chemistry: Organic Insulation;
Material: Plastic;
Thermal Rating: H 180;
Maximum Voltage: <10KV;
Classification: Organic Insulating Material;
Color: Yellow;
Thickness: 0.025mm, 0.050mm;
Young’s Modulus: >=3.1gpa;
Coefficient of Thermal Expansion: <27ppm/Degree;
Insulation: Electrical Insulation;
Temperature: High Temperature Resistance;
Protection: Protection of FPC;
Film: Kapton Film;
Label: Pi Label;
|
Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor;
Type: Insulation Film;
Chemistry: Organic Insulation;
Thermal Rating: H 180;
Maximum Voltage: <10KV;
Classification: Organic Insulating Material;
Color: Yellow;
Thickness: 0.025mm, 0.050mm;
Young’s Modulus: >=3.1gpa;
Coefficient of Thermal Expansion: <27ppm/Degree;
Tensile Strength: >=165MPa;
Elongation at Break: >=45%;
Dielectric Strength: >=195mv/M;
Shrinkage: <=0.12%;
Joints: <=3;
|
Application: Electrical Winding Insulation, Electrical Base, Shell;
Type: XLPE Compound;
Chemistry: Cross-Link;
Material: Polyolefin;
Classification: XLPE Compound;
Color: Customized According to Customer Requirements;
Brand: Swan;
Appearance: 4X 3 mm;
Gel Content: ≥60;
Tensile Strength: ≥13.5;
Elongation at Break: ≥350;
Brittleness Temperature: ≤15;
Hot Set Elongation Elongation Under Load: ≤80;
Permanent Deformation After Cooling: ≤5;
Change of Tensile Strength: ≤±20;
Change of Elongation: ≤±20;
DC Volume Resistivity (20ºC): ≥1.0X1014;
Dielectric Strength(20ºC): ≥25;
|
