Specification |
Warranty: 1 Year;
Shaping Mode: Injection Mould;
Surface Finish Process: Polishing, Mirror Polishing, Sand Blasting, Glossy;
Mould Cavity: Single Cavity, Multi Cavity;
Plastic Material: PP, PC, PE;
Process Combination Type: Progressive Die;
Application: Commodity, Home Use;
Runner: Hot Runner, Cold Runner;
Design Software: UG;
Installation: Fixed;
Standard: Hasco, Dme;
Customized: Customized;
After-sales Service: 1 Year;
Mould Steel: P20h, 718h, 2316, S136, 2738, Stc;
Mould Spare Parts: Ejectors/Water Tips/Rings/Seal Rings/Heater etc;
Mold 3D Format: STP/Step/X-T/Igs;
Mould Life: 0.8 Million Shots;
Hot Runner Brand: Yudo, Sure, etc;
|
Shaping Mode: Injection Mould;
Surface Finish Process: Polishing;
Mould Cavity: Single Cavity;
Plastic Material: PP;
Process Combination Type: Single-Process Mode;
Application: Commodity, Home Use, Garden;
Runner: Cold Runner;
Design Software: UG;
Installation: Fixed;
Standard: DME;
Customized: Customized;
Mould Material: P20;
Lifetime: 500, 000 Shots;
Soft Ware: Ug;
Packing: Wooden Case;
|
Shaping Mode: Injection Mould;
Surface Finish Process: Polishing;
Mould Cavity: Single Cavity;
Plastic Material: PP;
Process Combination Type: Single-Process Mode;
Application: Commodity, Home Use, Garden;
Runner: Cold Runner;
Design Software: UG;
Installation: Fixed;
Standard: DME;
Customized: Customized;
Mould Material: P20;
Lifetime: 500, 000 Shots;
Soft Ware: Ug;
Packing: Wooden Case;
|
Shaping Mode: Injection Mould;
Surface Finish Process: Polishing;
Mould Cavity: Single Cavity;
Plastic Material: PP;
Process Combination Type: Single-Process Mode;
Application: Commodity, Home Use, Garden;
Runner: Cold Runner;
Design Software: UG;
Installation: Fixed;
Standard: DME;
Customized: Customized;
Mould Material: P20;
Lifetime: 500, 000 Shots;
|
Shaping Mode: Injection Mould;
Surface Finish Process: Polishing;
Mould Cavity: Single Cavity;
Plastic Material: PP;
Process Combination Type: Single-Process Mode;
Application: Commodity, Home Use, Garden;
Runner: Cold Runner;
Design Software: UG;
Installation: Fixed;
Standard: DME;
Customized: Customized;
Mould Material: P20;
Lifetime: 500, 000 Shots;
Software: Ug;
Hardness: HRC30 or as Customized;
|