Specification |
Type: Rigid Circuit Board;
Dielectric: FR-4;
Material: Fiberglass Epoxy;
Application: Consumer Electronics;
Flame Retardant Properties: V0;
Mechanical Rigid: Rigid;
Processing Technology: Electrolytic Foil;
Base Material: Copper;
Insulation Materials: Epoxy Resin;
Brand: Shengyi, Kb, Nanya, Ilm;
Criteria: Aql II 0.65;
Hole Sizes: 0.15mm/0.2mm;
Bevel Edge: Yes;
Impedance: 50/90/100 Ohm;
Trace Width(Min.): 4mil;
Surfaec Treatment: HASL;
|
Type: PCBA;
Dielectric: PCBA;
Material: PCBA;
Application: PCBA;
Flame Retardant Properties: PCBA;
Mechanical Rigid: PCBA;
Processing Technology: PCBA;
Base Material: Aluminum;
Insulation Materials: Organic Resin;
Brand: Nova;
PCBA: PCBA;
|
Type: Rigid Circuit Board;
Dielectric: FR-4;
Material: Fiberglass Epoxy;
Application: Medical Instruments;
Flame Retardant Properties: V0;
Mechanical Rigid: Rigid;
Processing Technology: Electrolytic Foil;
Base Material: Copper;
Insulation Materials: Organic Resin;
Brand: Mustar;
Copper Thickness: 1-12 Oz;
Board Thickness: 0.8, 1.0, 1.2, 1.6, 2, 2.4mm;
Surface Finishing: HASL,Immersion Gold,Flash Gold, Plated Silver, OSP;
Minimum Line Spacing: 0.015mm;
Minimum Line Width Spacing: 0.015mm;
Testing Service: Ict, Function Test, X-ray, Aoi;
MOQ: 1PCS;
Layers: 1-64;
Warranty: 2 Years;
|
Type: Rigid Circuit Board;
Dielectric: FR-4;
Material: Fr4 (140tg, 170tg, 180tg), Fr-406, Fr-408, 370hr;
Flame Retardant Properties: V0;
Mechanical Rigid: Rigid;
Processing Technology: Electrolytic Foil;
Base Material: Copper;
Insulation Materials: Organic Resin;
Brand: PS;
Quality Test: Aoi, 100% E-Test;
V- Cut Tolerance: +-10mi;
Bevel Edge: +-5mil;
Hole Location Tolerance: +-2mil;
Hole Diameter Tolerance: +-0.05mm;
Board Thickness Tolerance: +-5%;
Line Width/Space Tolerance: +-10%;
|
Type: Rigid Circuit Board;
Dielectric: FR-4;
Material: Fr4 (140tg, 170tg, 180tg), Fr-406, Fr-408, 370hr;
Flame Retardant Properties: V0;
Mechanical Rigid: Rigid;
Processing Technology: Electrolytic Foil;
Base Material: Copper;
Insulation Materials: Organic Resin;
Brand: PS;
Quality Test: Aoi, 100% E-Test;
V- Cut Tolerance: +-10mi;
Bevel Edge: +-5mil;
Hole Location Tolerance: +-2mil;
Hole Diameter Tolerance: +-0.05mm;
Board Thickness Tolerance: +-5%;
Line Width/Space Tolerance: +-10%;
|