| Specification |
Carrier: LDPE;
Color: Red;
Application: Blowing/Injection Molding/P;
Appearance: Small Granule;
Movability Resistance: 6-8;
Color Intensity: 95-105%;
95-105%: 4-6;
Light Fastness(Level): Level 5;
|
Carrier: LDPE;
Color: Yellow;
Model No.: LLDPE;
Einecs: 618-339-3;
Material: Linear Low Density Polyethylene/LLDPE;
Usage: General Plastics, Engineering Plastics, Specialty;
Plastic Properties After Heated: Thermoplastic Plastics;
Plastic Forming Method: Injection;
Name: Linear Low Density Polyethylene/LLDPE;
Form: Granule;
Use: Production of Agricultural Film, Packaging Film;
Water Solubility: Insoluble;
Product Performance: High Flow, High Toughness and High Transparency;
Density: 0.918 ~ 0.935 G/Cm;
Type: Virgin/Recycled;
Kind: Plastic Raw Materials;
Characteristic: High Strength, Good Toughness, High Rigidity;
|
Carrier: PE;
Color: White;
Plastic Properties After Heated: Thermoplastic Plastics;
Appearance: Withe Granule;
Type: Virgin&Recycle;
Plastic Forming Method: Blow Molding;
|
Carrier: PE;
Color: White;
Density: 0.941 - 0.960 G/Cm;
Application/Usage: Film, Caps, Handle, Bottle, Yarn, Bag, Pipe, Toy;
Plastic Forming Method: Injection;
Melt Index, I2.16: 2.0 G/10 Min (ASTM D 1238);
Melting Point: 124°c (Equate);
Bulk Density: 530 Kg/M³ (ASTM D 1895);
Gauge: 25 Microns;
Tensile Strength @ Break (MD, Td): 31, 23 MPa (ASTM D 882);
1% Secant Modulus (MD, Td): 195, 220 MPa (ASTM D 882);
Elmendorf Tear (MD, Td): 31, 124 N/mm (ASTM D 1922);
Dart Impact, F50: 90 G (ASTM D 1709 a);
Puncture Energy: 60 J/mm (Equate);
Haze: 13% (ASTM D 1003);
Gloss, 45°: 55 (ASTM D 2457);
Efdc-7050: a Linear Low-Density Polyethylene (LLDPE) Resin Fo;
|
Carrier: PE;
Color: White;
Density: 0.941 - 0.960 G/Cm;
Application/Usage: Film, Caps, Handle, Bottle, Yarn, Bag, Pipe, Toy;
Plastic Forming Method: Injection;
Melt Index, I2.16: 2.0 G/10 Min (ASTM D 1238);
Melting Point: 124°c (Equate);
Bulk Density: 530 Kg/M³ (ASTM D 1895);
Gauge: 25 Microns;
Tensile Strength @ Break (MD, Td): 31, 23 MPa (ASTM D 882);
1% Secant Modulus (MD, Td): 195, 220 MPa (ASTM D 882);
Elmendorf Tear (MD, Td): 31, 124 N/mm (ASTM D 1922);
Dart Impact, F50: 90 G (ASTM D 1709 a);
Puncture Energy: 60 J/mm (Equate);
Haze: 13% (ASTM D 1003);
Gloss, 45°: 55 (ASTM D 2457);
Efdc-7050: a Linear Low-Density Polyethylene (LLDPE) Resin Fo;
|
