Specification |
CAS No.: 9004-65-3;
Formula: C18h38o14;
EINECS: 220-971-6;
Appearance: Powder;
Usage: Coating Auxiliary Agents, Cement Mortar, Tile Adhesive;
Color: White;
Product Name: Hydroxypropyl Methyl Cellulose/ HPMC;
Application: Cement Mortar, Tile Adhesive;
Application2: Putty Powder, Gypsum, Paint;
Function: Thicken and Water Retain Agent;
Raw Material: Refined Cotton;
Density: 0.35-0.55g/cm3;
Grade: Inductrial Grade;
Application3: Detergent;
Transmittance: 85%;
Whiteness: 78%;
Transport: by Sea, by Express, by Train, by Trucker;
|
CAS No.: 134180-76-0;
Appearance: Liquid;
Usage: Surfactants;
Color: Colorless Transparent;
Surface Tension (0.1%, Mn/M): 22.0;
Cloud Point (0.1 Wt%, ºC): 35;
Viscosity (Cst, 25ºC): 60;
Specific Gravity (25/25 ºC): 1.020;
Typical Application 1: Crop Protection Products;
Typical Application 2: Herbicides;
Typical Application 3: Insecticides;
Typical Application 4: Fungicides;
Typical Application 5: Nutrients and Plants Grow Regulators;
Key Feature 1: Superspreading and Non-Ionic;
Key Feature 2: Save up to 70% Spray Volume;
Key Feature 3: Excellent Penetration;
Key Feature 4: Better Spray Treatment Adhesion;
Key Feature 5: Rainfastness to Lower Pesticide Wash-off and Waste;
Key Feature 6: Lower Use Levels Than Non-Silicone Surfactants;
|
CAS No.: 27306-78-1;
Appearance: Liquid;
Usage: Surfactants;
Color: Colorless and Transparent;
Cloud Point (0.1 Wt%, ºC): <10;
Viscosity (Cst, 25ºC): 20;
Surface Tension (0.1%, Mn/M): 20.5;
Specific Gravity (25/25 ºC): 1.007;
Typical Application 1: Crop Protection Products;
Typical Application 2: Nutrients and Plant Growth Regulators;
Typical Application 3: Herbicides Funigicides Pesticides;
Use as 1: Component in Agrochemical Formulations;
Use as 2: Tank-Side Adjuvant;
Key Feature 1: Superspreading;
Key Feature 2: Reduce up to 70% Spray Volume;
Key Feature 3: Excellent Penetration;
Key Feature 4: Better Spray Adhesive Treatment;
Key Feature 5: Rainfastness;
Key Feature 6: Nonionic;
|
CAS No.: 63148-62-9;
Formula: [-Si(CH3)2o-]N;
EINECS: 203-492-7;
Appearance: Liquid;
Usage: Oil Drilling Auxiliary Agent, Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Leather Auxiliary Agents, Electronics Chemicals, as Defoamer/Lubricant/Mold Release Agent/Coating O;
Color: Colorless Transparent;
Shelf Life: 36 Months;
Storage: Be Stored in Closed Containers;
Characteristic: Oil Liquid;
Applications 1: Machine & Textile & Paint;
Applications 2: Medicine & Personal Care & Food;
Key Feature 1: Ease of Application and Rubout;
Key Feature 2: Enhances Color;
Key Feature 3: High Water Repellency;
Key Feature 4: High Spreadability and Compatibility;
Key Feature 5: Low Environmental Hazard;
Key Feature 6: Essentially Odorless, Tasteless and Nontoxic;
Use as 1: Defoamer;
Use as 2: Lubricant;
Use as 3: Mold Release Agent;
Use as 4: Coating of Insulation, Dust/Mould Proof;
|
CAS No.: 31795-24-1;
Formula: CH3ko3si;
EINECS: 250-807-9;
Appearance: Liquid;
Usage: Coating Auxiliary Agents, Silicone Water Repellent;
Color: Colorless and Transparent;
Solid Content (90 Min at 150 ºC, %): 42;
Active Content, %: 23;
Solvent: Water;
Specific Gravity (25/25 ºC): 1.29;
Key Feature 1: Reduces Substrate Water Absorption;
Key Feature 2: Increase Substrate Life;
Key Feature 3: Colorless and Non-Yellowing;
Key Feature 4: Penetrating and Breathable;
Key Feature 5: Low Voc;
Key Feature 6: Nonflammable;
Typical Application 1: as Surface Treatment in Applications;
Typical Application 2: for Use on Bricks;
Typical Application 3: for Use on Sandstone;
Typical Application 4: for Use on Limestone;
Typical Application 5: for Use on Ceramics;
|