Specification |
Installation: Horizontal or Vertical;
Craft: Detonation Spraying;
Thickness of Coating: 0.20-0.30mm for Single Side After Grinding;
Hardness of Coating: Hv1300;
Surface Porosity: <1%;
Surface Bonding Strength: >10kg/M;
Surface Roughness: 0.4;
Application: Enamelling Machine;
Feature: High Hardness, Fine Polish;
Delivery Time: 7-10 Days;
|
Installation: Vertical;
Customized: Customized;
Condition: New;
Feature: Insulation;
Limits of Wire Gauge: 0.6-1.5mm;
Pay off Method: Roll;
Take up Method: Single Shaft Horizontal Take up;
Number of Wire: 32(16+16);
Number of Coating Tracks: 6;
Distance Between Wires: 12 mm;
Rang of Wire Speed: 0-50m/Min;
Take-up Spool: PT15-PT25;
Pay off Spool: 400-500mm;
Coating Method: Felt/Mould;
Supply Voltage: 3*380V50Hz;
|
Customized: Customized;
Condition: New;
Feature: Insulation;
Wіrе Rаngе: ф0.20~ ф0.50mm, Сu;
Total Lines: 4(Single Line/Single Oven);
Maximum Wire in of Inline Drawing: ф2 00mm;
Maximum Drawing Passes: 15, Elongation(No.1-14:1.26. No.15:1.21);
Total Passes: 24 (Bc:24, Mc:10, Tc:6; Die);
Wire Pitch: 9 mm;
Mechanical Speed: Max 900m/Min;
Wind-up Bobbin: PT25, PT45, PT60, PT90, PT200, PT270;
Retracting Mode: Auto Reel Alternation;
Total Installed Power: 335kw;
|
Wire Range: φ0.8 to φ1.6;
Total Line: 4(Single Line/Single Oven);
Max. Inlet Wire Size for Inline Drawing: φ2.6mm;
Max. Drawing Passes: 15, Elongation;
Total Passes: 24;
Wire Pitch: 10.5mm;
Mechanical Speed: Max 250m/Min;
Wind-up Bobbin: PT25, PT45, PT60, PT90, PT200, PT270;
Retracting Mode: Auto Reel Altemation;
Total Installed Power: 350kw;
|
Customized: Customized;
Condition: New;
Feature: Insulation;
Wіrе Rаngе: ф0.20~ ф0.50mm, Сu;
Total Lines: 4(Single Line/Single Oven);
Maximum Wire in of Inline Drawing: ф2 00mm;
Maximum Drawing Passes: 15, Elongation(No.1-14:1.26. No.15:1.21);
Total Passes: 24 (Bc:24, Mc:10, Tc:6; Die);
Wire Pitch: 9 mm;
Mechanical Speed: Max 900m/Min;
Wind-up Bobbin: PT25, PT45, PT60, PT90, PT200, PT270;
Retracting Mode: Auto Reel Alternation;
Total Installed Power: 335kw;
|