Specification |
Logo Printing: Without Logo Printing;
Customized: Customized;
Type: Cutter Bar;
Material: Tungsten Carbide +Cobalt;
Namde: Tungsten Alloys Rod and Cemented Carbide Rods;
Grade: Yg6X Yg8 Yg10X Yl10.2 Yg2X;
Application: for Making Endmills ,Drills and So on;
Tolerance: H6;
Surface: Polished or Blank;
|
Logo Printing: Without Logo Printing;
Size: Od12~300xid6~95 Mmxt0.6~4.5 mm;
Customized: Both Customized & Non-Customized;
Type: Cutting Tool;
Material: Tungsten Carbide;
Wc+Co Powder: 100% Virgin Material;
Cobalt Percentage: From 3% to 30% Based on Different Grades;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Grades: K10/K20/K30/K40/Yl10.2/Yg6/Yg6X/Yg8/Yg10X/Yl10.2;
Surface Finishing: Polished and Unpolished;
Main Using Purpose: for Paper, Tobacco, Rubber, Fibre and Metals;
Model: 315*2.9/2.5*40h*100t;
Application: Cuts Solids and Tubes;
|
Logo Printing: Without Logo Printing;
Size: 10.5X10.5, 11X11, 12X12, 14X14, 15X15mm etc;
Customized: Customized;
Type: Tool Parts;
Material: Tungsten Carbide;
Wc+Co Powder: 100% Virgin Material;
Cobalt Percentage: From 3% to 20% Based on Different Grades;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Grades: Zk30UF;
Surface Finishing: Polished and Unpolished;
Main Using Purpose: Wood Working Tool Part;
Tolerance Standard: +/-0.025 mm;
|
Logo Printing: Without Logo Printing;
Size: Overall Length:38-81mm;
Customized: Both Customized & Non-Customized;
Type: Cutting Tool;
Material: Tungsten Carbide;
Wc+Co Powder: 100% Virgin Material;
Cobalt Percentage: From 3% to 30% Based on Different Grades;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Grades: K10/K20/K30/K40/Yl10.2/Yg6/Yg6X/Yg8/Yg10X/Yl10.2;
Surface Finishing: Polished and Unpolished;
Main Using Purpose: Industries of Airplane, Ship Building,Automobile,;
|
Logo Printing: Without Logo Printing;
Size: Standard;
Customized: Both Customized & Non-Customized;
Type: Cutting Tool;
Material: Tungsten Carbide;
Wc+Co Powder: 100% Virgin Material;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Grades: K10/K20/K30/K40/Yl10.2/Yg6/Yg6X/Yg8/Yg10X/Yl10.2;
Surface Finishing: Polished and Unpolished;
Main Using Purpose: Carbide Body for Drill Bits/ Endmills / Reamers;
Finishing: Coated;
|