Basic Info.
Access Features
10g Gpon Access Gpon Access P2p Access
Broadband Layer 2 Features
Mac Address Management Mac Address Learning
Qos
Priority Processing Traffic Management
Multicast
Pim-Ssm Igmp Snooping
Ipv6
Ipv6 Basic Feature Ipv6 Qos Ipv6 Layer 2 Forwardin
Network Protection Features
Mstp Rrpp Smart Link and Monitor Link
Layer 3 Features
Vlan Layer 3 Interface ARP ARP Proxy DHCP Relay Dh
Layer 2 Tunnel Emulation Technology
TDM Pwe3 ATM Pwe3 Eth Pwe3
Voice Service
Moip Pots Voice Service Issuing Voice Configuratio
Security
User Security System Security Oam Security Line Se
Product Description
Product Description
The SmartAX MA5600T/MA5603T/MA5608T is a multi-service access module launched by Huawei.
MA5600T/MA5603T/MA5608T Positioning
The MA5600T/MA5603T/MA5608T, functioning as an integrated optical-copper access equipment, provides the integrated broadband and narrowband access and FTTx optical access services that feature high rate, high bandwidth, and high quality. It can function as an OLT, MSAN, or IP DSLAM. The MA5600T is a large-capacity device, the MA5603T is a medium-capacity device and the MA5608T is a small-capacity device.
Supports the 10G GPON and GPON access service. All the three can function as an optical line terminal (OLT) in the GPON system, working with the optical network terminal (ONT) or other optical network units (ONUs).
Supports the point-to-point (P2P) FE/GE optical access. The P2P board is mainly used for cascading, and it can also provide users with P2P FTTH access by cooperating with ONTs.
Provides the voice service solution based on the Session Initiation Protocol (SIP) and H. 248, supports the POTS port to implement the voice service, fax service, narrowband modem service, and various supplementary services.
Provides the E1/N*64k private line service through the TDM SHDSL board. And H802EDTB board supports the TDM SHDSL feature.
Supports broadband access services such as ADSL2+, VDSL2, and SHDSL, enhancing the xDSL function.
In the upstream direction, the device is generally connected to the IP/MPLS network through the Ethernet (GE/10GE) port.
New Features
New boards and features added in the V800R013C00 version deliver greater benefits to customers. This topic describes the major features and boards added in the version: vectoring, SPUF functioning as a Layer 3 forwarding board, Ethernet ring protection switching (ERPS), 1588v2 clock synchronization, and distributed cable modem terminal system (D-CMTS) centralized management.
Vectoring
A new board, H806VPEA whose power consumption is low and the system level vectoring (SLV) supports more lines, is added to V800R013C00.
SLV is capable of counteracting the crosstalk between 384 VDSL2 lines on the OLT.
The static and maximum power consumption of the board decrease because of the power conservation. For more details about the power consumption, see Board Specifications
H801SPUF Functioning as a Layer 3 Forwarding Board
A new board, H801SPUF, is added to V800R013C00 to function as a Layer 3 forwarding board, which strengthens the Layer 3 forwarding capabilities of the system.
Table 1 Feature specifications differences
Feature Specifications | SPUF for Layer 3 Forwarding | Control Board for Layer 3 Forwarding |
---|
SCUH | SCUN | SCUH | SCUN |
---|
Routing table entries | IPv4: 64K IPv6: 32K | IPv4: 16K IPv6: 8K | IPv4: 12K IPv6: 6K | IPv4: 5K IPv6: 5K |
ARP/ND entries | ARP: 64K ND: 32K | ARP: 32K ND: 16K | ARP: 16K ND: 8K | ARP: 8K ND: 4K |
ERPS
The Ethernet Ring Protection Switching (ERPS) is the ring protocol in the G.8032 distributed by the ITU-T. To resolve the loop issues caused by redundancy backup in a network, OLTs of earlier versions support the STP and RRPP protocols, which have restrictions in convergence and interoperability. V800R013C00 supports ERPS and enables a fault recovery time of 100 ms, which is 10 times shorter than the fault recovery time of STP (counted by seconds). This feature addresses customer requirements for better convergence performance. ERPS is a protocol defined in Recommendation ITU-T G.8032. Interoperation is achieved if all devices participating in the ring network support ERPS.
1588v2 Clock Synchronization
The 1588v2 feature supports a 50 ppb clock frequency and nanosecond-level clock synchronization, which is 1000 times more precise than the millisecond-level NTP clock synchronization.
Upgrade Without Service Interruption
Upgrade without service interruption is supported for control boards and service boards. In versions earlier than V800R013C00, upgrade without service interruption is supported only for control boards. In the FTTM scenario where service boards are in redundancy backup, service interruption is shortened to within 500 ms during an upgrade. Therefore, uninterrupted services, such as uninterrupted voice and IPTV services, are ensured.
D-CMTS Centralized Management
Distributed cable modem termination system (D-CMTS) centralized management: An optical line terminal (OLT) deployed in a branch equipment room functions as a main frame and connects to D-CMTSs (MA5633s, extended frames) located on optical nodes by using GPON or GE cascading boards. In this manner, remote extended frames are no longer standalone NEs (no longer allocated independent management IP addresses), but are managed by the main frame. These remote extended frames are regarded as remote service boards of the main frame and have the same functions and features as those of the main frame.
In D-CMTS centralized management, the OLT and the MA5633s are compatible with the existing MSO network and can replace traditional CMTSs. The coaxial cable network on the user side and the metro aggregation network remain unchanged. Software commissioning is not required for remote extended frames and one onsite operation suffices, which can save the maintenance consumption.
This document does not include contents about the D-CMTS centralized management feature. For scenarios concerning D-CMTS centralized management, see the D-CMTS Centralized Management Solution Overview.
List of Features
This topic lists all the features supported by the MA5600T/MA5603T/MA5608T, with the new features supported by the V800R013C00 version highlighted.
In the Feature column, "*" indicates that this feature is a new feature of the V800R013C00 version.
Table 1 Features supported by the V800R013C00 version
Classification | Feature |
---|
Access features | 10G GPON access GPON access P2P access ADSL/ADSL2/ADSL2+ access VDSL2 access (supporting vectoring) ATM SHDSL/EFM SHDSL access TDM SHDSL access |
Broadband Layer 2 features | MAC address management MAC address learning VLAN attribute management Service stream processing Layer 2 forwarding policy Traffic classification VLAN switching policy Bridging |
QoS | Priority processing Traffic management ACL policy Congestion management HQoS |
Multicast | PIM-SSM IGMP snooping IGMP proxy Multicast VLAN management Multicast program management Multicast user management Multicast CAC VPLS multicast |
IPv6 | IPv6 basic feature IPv6 QoS IPv6 Layer 2 forwarding BGP4+ OSPF v3 |
Network protection features | *ERPS MSTP RRPP Smart link and monitor link Inter-board aggregation Ethernet link aggregation (through the LACP protocol) BFD STM-1 port protection switching Redundancy protection GPON Type C |
MPLS | Basic MPLS functions MPLS RSVP-TE MPLS OAM Graceful restart (GR) function of the LDP, RSVP-TE, and PW As a P device MPLS PW traffic label VPLS |
Layer 3 features | VLAN Layer 3 interface ARP ARP proxy DHCP relay DHCP option 60 Static routing RIP dynamic routing OSPF dynamic routing IS-IS dynamic routing BGP dynamic routing DHCP proxy ECMP VRF VRRP snooping |
Layer 2 tunnel emulation technology | TDM PWE3 ATM PWE3 ETH PWE3 Terminating the SAToP service and transmitting the service upstream through the STM-1/E1 port Terminating the native TDM service and transmitting the service upstream through the E1/STM-1 port |
Voice service | VoIPFOIP SIP H.248 ISDN BRA/PRA access MOIP POTS voice service Issuing voice configurations through OMCI R2 PBX access H.248/SIP dual upstream transmission |
Security | User security System security OAM security Line security |
OAM features | Remote operation and user management Version and data management Device exception management Service overload control ETH OAM(Y.1731) RING check ANCP Intelligent site management Centric Management for GE Remote Extended Subracks in FTTB or FTTC Scenarios GE upstream commission outside of the site |
System energy conservation | Energy conservation control Energy consumption monitoring |
Environment monitoring | Monitoring parameters: temperature, humidity, water, smoke, MDF, and door status sensor Temperature control unit (TCU) management Battery online status monitoring and alarm reporting SMU power management |
Control board redundancy | Load-balancing mode Active/Standby mode |
Clock features | *IEEE 1588 V2 clock synchronization BITS access clock synchronization Synchronous Ethernet clock System internal clock Network time synchronization Line recovered clock (E1/STM-1/SAToP) |
Maintenance and Management Features
Table 2 System maintenance and management features
Classification | Feature |
---|
Management | Configuration through the serial port (console) |
Remote configuration through SSH telnet |
Configuration through the CLI |
Management through SNMP V1, SNMP V2, or SNMP V3 |
Management through the iManager U2000 |
System logging function |
Hierarchical alarms |
Maintenance | Printing the debugging information |
Ping |
Trace route |
Remote maintenance through SSH telnet |
Performance management |
Loading and upgrade | Loading and upgrade through Xmodem |
Loading and upgrade through FTP, TFTP, or SFTP |
Loading and upgrade upon startup, and the in-service loading and upgrade Automatically uploading alarms, logs, and data to the FTP server |
Performance measurement | Performance measurement of the network-side Ethernet packets |
Port performance measurement on the service access side |
Traffic performance measurement of the terminal |
Multicast traffic measurement |
Performance measurement through IGMP proxy or IGMP snooping |
Address:
Room 110, No. 389 Jinwan Road, Shanghai, China
Business Type:
Manufacturer/Factory, Trading Company, Group Corporation
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Manufacturing & Processing Machinery
Company Introduction:
Combasst Co., Ltd, established in 1996 and registered in Shanghai China, is a high-tech company, specializing in the development and production of communication and digital audio products. Our company possesses strong technical strength and market competitiveness in the field of data communication, fiber communication, software development and special-purpose integrated circuit design, etc. The company is equipped with an advanced R&D center and product lines, which allows us to take external business of single-chip machine development and surface mounting process while meeting various internal requirements. We strive for progress, launching high quality products and solutions in the field continuously, satisfying to greatest extend the application demands from the clients in railway, transportation, electric power, telecommunication and public security industries, etc.
Pursuant to the people oriented principal of, our company fosters a talented and high qualified R&D team and management team, boasting of a great batch of internal professional technical personnel and specialist staff whose research areas and fields maintain at the international leading level. Their talent and innovative spirit are integrated with each product launched by our company. Thus, Anycan can provide our users with customized products and personalized services.
Our company′s products mainly include: XDSL, PDH, DSLAM, Fiber Modem, FOM, Converter, Video Server, DVR, DVS, flat radio marshalling system, digital audio recorder, digital monitoring and recording system, communication products of computer network and on-board media player, etc. We have also proposed and implemented the total excellent solutions for industries.
We constantly adhere to the principal of "putting the users′ interests in the first place" and "taking the users′ concern as our own, considering for the users′ need". Anycan has a complete sale net and perfect service system throughout the nation, which facilites to provide the customers with quick and considerate service at an utmost speed. We ensure that the products and services provided are perfect for users without regrets, accomplishing the service with "Zero Customer Complaint".
For the healthy, rapid and stable development of our company, we are pursuing the business philosophy of "excellent products, first-class services, courageous innovation and good-faith cooperation". We are looking forward to entering into a faithful cooperation with companies and users, who desire to engage in the process of product development and technical promotion in communication field, to create a win-win gratifying situation.