Power Cable

Eay2y-J Power Cable 0, 6/1kv with Al Conductors PVC Insulated HDPE Sheathed

Product Description EAY2Y Power cable 0,6/1kV with Al conductors PVC insulated HDPE sheathed DESIGN 1 | Aluminum conductor, round solid (RE), round stranded (RM), resp. sector-shaped stranded (SM) 2 | Core insulation (PVC) 3 | PVC core covering or taping 4 | outer sheath of HDPE (High Density Polyethylene) APPLICATION Power distribution cables in power stations, industrial installations and switchgears, as well as in local mains. For fi xed installation underground, in interior premises, cable ducts, in the open air, in water - as permitted by the local building regulations - if no risk of any mechanical damage is to be expected. TECHNICAL DATA Standard: IEC 60502-1 Rated voltage: 0.6/1 kV Test voltage: 3.5 kV/50 Hz Temperature range: laying temperature: min. -5 °C operating temperature: -30 °C up to +70 °C conductor temperature: max. +70 °C short-circuit temperature: max. +160 °C/5 s Bending radius (min.): 15 x ? of cable (single core) 12 x ? of cable (multi-core) Core identifi cation: HD 308 S2 Fire properties: flame retardant: EN 60332-1-2 E-AY2Y PVC Insulated Cable with Aluminium Conductor Number of cores and nominal cross section mm2 Aluminium figure kg/km Overall diameter appr. mm Weight appr. kg/km Current carrying capacity ground A Current carrying capacity air A 1 x 25 RM 74,0 11 174,0 106 87 1 x 35 RM 103,0 12 209,0 127 107 1 x 50 RM 147,0 14 282,0 151 131 1 x 70 RM 206,0 16 363,0 185 166 1 x 95 RM 279,0 18 520,0 222 205 1 x 120 RM 353,0 19 557,0 253 239 1 x 150 RM 441,0 21 674,0 284 273 1 x 185 RM 544,0 24 826,0 322 314 1 x 240 RM 706,0 26 1052,0 375 378 1 x 300 RM 882,0 29 1282,0 425 437 1 x 400 RM 1.200,0 32 1598,0 487 513 1 x 500 RM 1.510,0 36 2022,0 558 600 1 x 630 RM 1.900,0 40 2200,0 635 701 3 x 240/120 SM 2.470,0 55 4215.0 364 338 4 x 25 RM 294,0 25 887,0 102 82 4 x 35 SM 412,0 26 796,0 123 100 4 x 50 SM 588,0 27 1017,0 144 119 4 x 70 SM 823,0 30 1312,0 179 152 4 x 95 SM 1.117,0 34 1698,0 215 186 4 x 120 SM 1.411,0 40 2459,0 245 216 4 x 150 SM 1.764,0 43 2594,0 275 246 4 x 185 SM 2.176,0 50 3777,0 313 285 4 x 240 SM 2.822,0 54 4106,0 364 338 4 x 150 SE 1.764,0 45 2594,0 275 246 5 x 25 RM 368,0 26 1018,0 102 81 5 x 35 RM 515,0 30 1316,0 121 99 5 x 50 SM 781,0 32 1549,0 144 119 5 x 70 SM 1.071,0 37 2021,0 179 152 5 x 95 SM 1.484,0 41 2598,0 215 186 5 x 120 SM 1.875,0 47 3201,0 245 216 Application: In earth, ducts, on support brackets, in dry and wet conditions etc., where one does not expect mechanical damages and the cables are not exposed to the mechanical tensile strain. In urban networks, industrial plants, electric power plants and other electricity consumers and for connection of control devices in industry, traffic etc. Construction: Conductors: Al, class 1 or 2 according to EN 60228 Insulation: PVC compound DIV 1 Bedding: Extruded elastomere or plastomere compound or plastic tape Sheath: HDPE compound DMP 1 Technical characteristics: Voltage rating (Uo/U): 0,6/1 kV Min. temp. for cable laying: -5°C Max. working temperature: 70°C Max. short-circuit temperature: 160°C Min. bending radius: single-core - 15D; multicore - 12D CPR class: Fca Packing shipping Why Choose Us ? Quality And Safety Hongda Cable was founded in 1999 with almost 17 years of experience in the cable industry. Our manufacturing facilities are equipped with state-of-the-art technology, so we are able to meet our customers' needs for a wide range of industrial cables. With knowledgable engineers, rigorous quality standards and customer-centered co

PVC Insulated Flat Twin 450/759V Electrical SAA Austalian Power Cable

Product Description Laid PVC Insulated & Sheathed Flat Twin 450/750V Power SAA Cable PVC insulated laid ffat and sheathed cable to AS/NZS 5000.2. Application:For general wiring, unenclosed, enclosed in conduit, for domestic, commercial and industrial installations where not subject to mechanical damage. Insulation Colour White,Red Sheath Colour White Behaviour in ffame and ffre Flame retardant Standard Compliance AS/NZS 5000.2 Conductor Plain annealed copper conductor to AS/NZS 1125 Can also be operated at temperatures up to 90 °C when not exposed to mechanical deformation Insulation V-90 PVC Sheath 3V-90 PVC Flexibility Semi-rigid Temperature range Normal operating temperature: +90 °C Minimum operating temperature: 0 °C Installation conditions In free air In conduit In ground with protection External building Detailed Photos FAQ Q: Can I have a sample order? A: yes, we welcome sample orders to test and check quality. Q: Do you offer a guarantee for the products? A: Yes, we offer a 1-year warranty on our products. Q:Can I visit your factory before I place an order? A:Yes, of course. I'll show you around our whole plant and equipment. Q:Can I customize the product? A:Of course, we will customize the exact product according to the needs of each customer. Q;How to pay after order? A:T/T, thirty percent down payment and the rest before shipment. Our Advantages

TUV H1z2z2-K/PV1-F Xlpo Double Insulation Solar Cable Wire

H1Z2Z2-K/PV2-F Photovoltaic Cable, TUV certified and fully compliant with EN50618 and IEC 62930 standards. This high-performance cable is specifically designed for photovoltaic (PV) systems, ensuring reliability and efficiency in solar energy applications. Key Features: Class 5 Tinned Copper Conductor: Ensures excellent conductivity and corrosion resistance. Double XLPO Insulation: Provides superior protection and durability. Halogen-Free and Flame Retardant: Enhances safety and reduces environmental impact. Excellent Weather Resistance and UV Protection: Suitable for harsh outdoor conditions. Wide Operating Temperature Range: From -40°C to 90°C, ensuring performance in extreme climates. Rated Voltage: AC 0.6/1kV and DC 1.8kV, ideal for solar power systems. Long Service Life: Guaranteed 25-year durability, reducing maintenance costs. Applications: Widely used in ground-mounted and rooftop solar power systems, this cable ensures reliable power transmission in both residential and commercial PV installations. Available Sizes: Ranging from 2.5mm² to 35mm², offering flexibility for various system requirements. The H1Z2Z2-K/PV2-F Photovoltaic Cable is a trusted solution for efficient and sustainable solar energy systems, meeting the highest industry standards for performance and safety. Home About Us Contact Us Proudcts Main Products Hot Products ESP Cable Flat ESP Cable Round ESP Cable Copper Cable IEC/CCC Copper Cable UL/CUL Copper Cable Aluminum/Aluminum Alloy Cable UL/CUL Aluminum/Aluminum Alloy Cable Solar Cable TUV Solar Cable UL Solar Cable

ACSR Merlin 180mm2 Bare Conductor Greased Conductor for 132kV Transmission Line

ACSR Merlin 180mm2 Bare Conductor Greased Conductor for 132kV Transmission Line Description: The use of Aluminium as a material for electrical conductors has greatly developed mainly due to its electrical properties. However, Aluminium conductors for most of transmission lines which spans are quite long, it is necessary an additional mechanical support. Commonly it is used galvanized steel wires for cores of ACSR. Application: Widely used as bare cable for overhead transmission lines and also as primary and secondary bare cable for distribution lines. Construction: ACSR is concentrically stranded conductor with one or more layers of Aluminium wire hard-drawn 1350-H19 on the galvanized steel wire core. The core may be single wire or stranded depending on the size. Steel wire is available in Class A or B galvanization as corrosion protection. ACSR is according to electrical and mechanical strength requirements of transmission or distribution lines, can provides an appropriate design combining the quantity of Aluminium and galvanized steel wires. Characteristics: · Construction characteristics Code Name Merlin Type of Conductor Circular Stranded Conductor material Aluminum / Steel Core · Dimension characteristics Conductor cross-section 336.4 Kcmil Aluminium cross-section 170.22 mm² Conductor cross-section 179.68 mm² Number of aluminium wires 18 Diameter of aluminium wires 3.47 mm Number of steel wires 1 Diameter of steel wires 3.47 mm Diameter of steel core 3.47 mm Conductor diameter 17.35 mm Grease Optional Max. DC resistance of the conductor at 20°C 0.1694 Ohm/km Approximate weight without grease 542.9 kg/km Packaging Photos: Workshop View: With professional rich experience in overseas business, Grand Cable is able to supply cables up to 500kV for global projects. Grand Cable covers an area of 130,000 square meters, owns total assets of 100 million CNY and more than 500 staff members. Grand Cable is one of key enterprises of China Wire & Cable Industry, the National High-Tech Enterprises, the Innovation and Development Pilot Enterprises, the Private Technology Enterprises, keeping Contract and Credit Enterprises and AAA-Grade Credit Enterprise. We have passed ISO9001 Quality System, ISO14001 Environment Management System Certificate and ISO 45001 Occupational Health and Safety Management System Certificate. With more than 300 sets of first-class domestic and imported manufacture and test equipment, Grand Cable can manufacture ten thousand specifications, including Bare Conductors, Earthing Materials, Electric Cables, Solar Cables, Overhead/Aerial Cables, Control Cables, Instrumentation Cables, Power Cables (LV/HV/MV/EHV), Special Cables. Today, Grand Cable is a fast growing global supplier, our products can be manufactured in compliance with different standards, including International Electrical Standard (IEC), Australia and New Zealand Standard (AS/NZS), German Standard (VDE DIN), British Standard (BS), European Standard (EN/CENELEC HD), French Standard (NF C), Canadian Standard (CAN/CSA), American Standard (ICEA/ASTM/ANSI/UL), Russian Standard (GOST), Argentina Standard (IRAM), Spanish Standard (UNE), Indonesian Standard (SNI), Indian Standard (IS), Japanese Standard (JCS/JIS), Chilean Standard (NCH), South African Standard (SANS/PIESA), etc. Grand Cable has been identified as High-Tech products, Brand-Name products and Well-Known Trademark. Our products cover electric power, petrifaction, railway, construction, metallurgical and appliance industries, widely used in construction of global urban & rural power grid, for electricity generation, transmission and distribution projects. Grand Cable always adheres t

High Tensile ASTM Standard Overhead AAAC Conductor

Standard ASTM B399: Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors ASTM B398: Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes Application This AAAC Conductor is used in high voltage overhead power transmission lines. Using high tensile strength aluminum alloy wire, AAAC has much larger breaking load than AAC. Compared with ACSR, it has better corrision-resistant performance and can avoid the magnetic loss. Product Details 1) Conductor material: hard drawn aluminum alloy wire 2) Resistivity @ 20ºC: 32.840 nΩ·m 3) Min. tensile strength: 325 MPa (Φ 3.5mm and below), 315 MPa (above Φ 3.5mm) 4) No. of stranded wires: 7, 19, 37, 61, 91, 127 5) Sectional area: 30.58~1000 MCM Cable Specification Packaging Polyethylene film packaging 1) Usually used for cables with an overall diameter 10mm and below 2) 100 meters per roll or as per customer's requirements 3) Packaging dimension: 50cm * 50cm * 20cm or below 4) Weight: 30 kg/roll or below Steel-wood or wood drum packaging 1) Used for cables with a overall diameter of 10mm and above 2) Drum size: 180cm * 180cm *110cm (different sizes are available according to packaging length) 3) Standard length: as per customer's requirements. 4) Wood wood lagging Factory Service 1) Select the right cable as per customer's requirements 2) Design suitable packaging to guarantee safe and the most economic delivery 3) Provide installation and use guidance 4) Product quality guarantee under the normal use

CE Certified PVC Insulation Nycwy Cable Weather Resistant UV Resistant Power Cable

UK 250V AC Power Cord with IEC C13 90 Degree Plug for Computer Equipment Supply

UK Mains Plug to IEC C19 Power Cord 3 Meters Extension Cable for Server Equipment