Blow Molding Machine

High-Quality CE Certified Injection Blow Moulding Machine for 500ml Pesticide Bottles

Product Description good quality IBM injection blow molding machine »Main Features 1.The clamping framework adopts single-crossbeam,double pillars,which enlarges the space of setting mould,will be easier to install mould. 2.Injection clamping adopts the structure of three oil vats and small supply-oil case,hence the speed of open/clamping will be quicker and the bearing pressure of mould will be more equally. 3.using tie-bar protection makes open/clamping mould work while transfer table rise/fall,so the production efficiency improve obviously,and protect core rods damages once mold hasn't at right station. 4.double servo motor system control for 30% consumption saving (Optional). 5.Special thickness working platform with QT material assure machine run stably,clamping well,anti-distortion. »Operating Principle Station A:Preform injection The bottle neck will be molded accurately after injecting the material into the cavity,After proper control,the mold open and mandrils to...along with the cavity. Station B:Blow molding Blowing action was done at this part,molding would be complete after cooling.(bottle shape decides by the mold cavity).The air came out from the mandrils huffs the cavity,make the cavity cling to the mold.Then mold open and the mandrils turn to...along with bottles. Station C:Stripper The bottle automatically will be ejected from the mandrils at this position and then to be packed.The three actions of injection/blowing/ejection working at the same time,which makes the machine of high efficiency and low waste with bottles. »Main Technical Parameters No. Item Unit FD30 FD50 FD70 1 Dia. of screw mm 40 45 50 2 Screw L/D ratio 22 22 22 3 Max. theoretical injection capacity cm³ 165 254 324 4 clamping force of injection mould kn 300 450 600 5 clamping force of blowing mould kn 55 70 80 6 pressure of hydraulic system Mpa 14 16 16 7 Max. pressure of compressing air Mpa 1 1 1 8 Wastage of cooling water m³/min ≥0.3 ≥0.5 ≥0.8 9 Range of formability product ml 1.5-2000 1.5-2000 1.5-2000 10 Height of formability product mm ≤200 ≤200 ≤200 11 Dia of formability product mm ≤100 ≤100 ≤100 12 Total power kw 24.7 36 48 13 Overal size(L×W×H) mm 3200×1150×2200 3750×1300×2300 4000×1450×2350 14 Machine weight ton 4 6 6 »Machine Main Parts Brand Key parts Brand Servo motor / VDP(Optional) Techmation/Yuken Hydraulic motor Intermote Hydraulic valve Yuken Pneumatic valve F e s t o Electrical valve Schendier or Omron Liner scale JEFFRAM Controller Jinghua/Omron(optional) Contactor Schendier Seals DZ Approach switch Omron »Packaging & Shipping

Maquina Trituradora De Plasticomaquina Sopladora De Pet Plastic Making Automatic Pet Blow Moulding Machine High Quality Made in China Blow Molding Machine

Product Description Full automatic PET bottle blow moulding machine Machine Features: 1).High Intelligence:The machine can be controlled through touch screen and running status is shown on it. 2).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality. 3).No Contamination:Closed production zone, good self-lubrication system avoid contamination. 4).Low Cost:Low consumption of electricity, air and water. 5).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise. Machine Configurations: a). PLC: DELTA (Taiwan) b). Cylinder: Air TAC (Taiwan)/ (Germany) c). Valve: (Germany) d). Relay: IEDC (Japan) e). All the components are selected with international advanced high-tech products. photo for blow mold (see below) photo for final bottle (see below) photo for preform (see below) Related Machine injection moulding machine(to product PET preform and lid) Company Information cooperated customer Packaging & Shipping Full automatic PET bottle blow moulding machines are packed with wooden pallets, covered with plastic film; auxiliary machines and spare parts are packed with wooden boxes. The loading to containers is done according to weight balance, every package's position is fixed in containers to avoid moving. The photos of whole delivery will be sent to you for reference. FAQ For choosing proper machine and saving your time, please read below questions carefully and send your inquiry soon , thanks . 1.weight for plastic product 2.pictures for plastic product (including dimension for plastic product) 3.what output per hour do you need ? 4.Other requirements about the machine you want. Turnkey project service: 1. we will provide all the machines for the complete production according to customer's requirements. 2. we will provide complete service for factory layout and other information to help customer to build the factory. 3. we can also provide the raw material to the customer if you need. 4. we will provide good service for machine installation and training, until the customers can run the machines and make stably production. 5. Except one year quality guarantee, we will provide after-sell service for all the life. 6. For long-term cooperation, we always provide good quality, good price and good service to customer. we are the professional and trustable supplier for turnkey projects. Let us do win-win business together. By the way , Our company is about 110 km away from Shanghai(1.5 hour bus driving from shanghai airport) . Warmly welcome you to visit our factory at any time.

Industrial Blowing Molding Machine Jojo Tank Production Line Plastic Water Storage Tanks

Technical Parameter of 1000L Machine 1000L water tank blow molding machine can use 300L, 500L,700L and 1000L blow molds. Capacity Product Unit Weight Thickness 300L Tank 18-20 PC/H 4-5KG 2-2.5mm 500L Tank 16-18 PC/H 6-10KG 2.5m 750L Tank 14-16 PC/H 10-15KG 2.5-3m 1000L Tank 10-12 PC/H 16-20KG 3-3.5mm Technical data for YK 1000L series 1000L blow molding machine Model No. YK 1000L-2 YK 1000L-3 YK 1000L-4 YK 1000L-5 YK 1000L-6 Specifications 2 layers 3 layers 4 layers 5 layers 6 layers Extruders Screw Diameter ∮100/100 ∮90*3 ∮80*4 ∮80*5 ∮80*6 Motor 55/55kw 45*3kw 37*4kw 37*5kw 37*6kw Plasticizing Capacity 350 kg/h 350kg/h 350kg/h 350kg/h 350kg/h L/D 30/1 30/1 30/1 30/1 30/1 Max Screw Speed 60 RPM 60RPM 60RPM 60 RPM 60 RPM Die Head Accumulator Capacity 45L 45L 50L 50L 50L Heating Load 72.7kw 76.7kw 67.8kw 67.8kw 74.8kw Max. Parison Weight 33kg 33kg 40kg 40 kg 40kg Clamping Unit Clamping Platen Size 1600x1500mm 1600x1500mm 1600x1500mm 1600x1500mm 1600x1500mm Max Mould Size 1400x1600mm 1400x1600mm 1400x1600mm 1400x1600mm 1400x1600mm Clamping Force 800 KN 800 KN 800 KN 800 KN 800 KN Mould Thickness 950-1350mm 950-1350mm 950-1350mm 950-1350mm 950-1350mm Hydraulic System Hydraulic Drive Motor (Main) 42kw 42kw 42kw 42kw 42kw Hydraulic Drive Motor (Parison Control) 7.5kw 7.5kw 7.5kw 7.5kw 7.5kw Oil Tank Capacity 1000L 1000L 1000L 1000L 1000L Machine Weight 30 Ton 32 Ton 36 Ton 40 Ton 44 Ton Dimension L x W x H 9m*4.5m*5.2m 9m*4.5m*5.2m 9m*12m*5.2m 9m*12m*5.2m 9m*12m*5.2m Total Power 287kw 338kw 348kw 412 kw 476kw Average Power Consumption 130kw 160kw 195kw 210 kw 245kw Blow Molding Machine Introduction Details 1. Adopt Siemens PLC,Siemens Touch Screen and MOOG to make the blow molding machine to operate easy,more intelligent . 2. Adopt progressive hydraulic system by ourselves,easy to control. 3. Adopt servo motor to control the hydraulic system,saving a lot of energy. 4.The technology of Die Head is same with Germany. 5. Adopt new integrated Multi-layers die head design. from one layer to six layers,support for productions of pallets and road barriers at same time. Special Design-Customized Service Qingdao Yankang Plastic Machinery Co., Ltd. is the largest professional blow molding machine integration enterprise in China, including product research and development, production, sales, and after-sales service. It is the pioneer and leader of the large blow molding machine. The company has its own professional research and development base. The core technology is 100% independent R&d innovation. According to the needs of customers and the situation of the site, we can use the private customized model to create suitable products for customers. Customized products: various blow molding machines including water tanks, IBC, road barriers, pallets, etc, and blow molds with different capacities. After-Sales Service TRAINING The Buyer could dispatch their operators to the Seller's factory for training, including machine operation, maintenance & simple repairs; Or against the requests of the Buyer, the Seller's technician could train the Buyer's operators in the Buyer's factory during the periods of installing & adjusting; INSTALLATION & ADJUSTMENT The Seller could dispatch an engineer against the requests of the Buyer to install and adjust the machines (free of charge) in the Buyer's factory. The Buyer should make a reservation in advance before delivery of the machines; The Buyer should pay for the engineer's food & board while installation in the buyer's factory. And the Buyer should also pay for the air

The Most Cost-Effective 4 Cavity Full Automatic Pet Plastic Water Juice Beverage Bottle Blow Molding Machine

The Most Cost-Effective 4 Cavity Full Automatic PET Plastic Water Juice Beverage Bottle Blow Molding Machine 4000-4500PCS/H Product Description 1.Brief Introduction The E-ST600-4 is a fully automatic blow molding machine designed for the production of PET bottles up to 600ml in capacity. It is ideal for manufacturing bottles used in carbonated beverages, mineral water, pesticides, edible oil, and cosmetics. With its high efficiency, precise molding, and stable performance, this machine ensures reliable and consistent production. 2.Settings: 1).PLC display: Mitsubishi 2).Pneumatic and valve parts: AirTac,Quanjia. 3).Touch screen: Weinview 4)Relay::OMRON 5).Other electric parts are all world-famous brand 3.Machine Features: 1)Reasonable design, full automaticlly control, save power and labor. 2)Feeding system carries the preforms by robot arms automatically. 3)Infrared oven heater adopts the quartz lamp to heat the PET tube. 4)Fully automatic process with low investment, high efficiency,quick and safe for operation, easy for maintenance. 5)We have perfect service after sales . 6)Adopting high quality components 4. Flow Chart 5.Connect Drawing: Product Parameters ITEMS UNIT E-ST750-2 E-ST1500-2S E-ST600-4S E-ST1500-4S E-ST600-6S E-ST1500-6S E-ST600-9S BOTTLE SPECIFICATION Cavity No. CAVITY 2 2 4 4 6 6 9 Max.Bottle Volume L 0.75 1.5 0.6 1.5 0.6 1.5 0.6 Max.Neck Diameter MM 38 38 38 38 38 38 38 Max.Bottle Diameter MM 76 105 68 102 68 102 68 Max.Bottle Height MM 260 330 260 330 260 330 260 Max.Preform Height MM 100 140 100 140 100 140 100 Theoretical output/BPH 2500 2000 5500 4000 8500 7000 12000 CLAMPING Clamping Force KN 180 200 400 480 560 650 720 Mold Stroke MM 82 135 90 125 90 125 90 Stretching Stroke MM 370 450 260 330 260 330 260 Bottom Stroke MM 50 50 50 50 50 50 50 Cavity Pitch MM 100 120 76.2 114.3 76.2 114.3 76.2 ELECTRICAL POWER Number Of Lamp PCS 14 18 28 48 40 80 48 Max.Heating Power KW 28 36 56 92 64 96 144 Installed Power KW 30 38 58 98 69.5 100 180 Actual Power Consumption KW 12 15 19 25 32 40 60 Voltage/Frequency V/HZ 3P 380V±10%, 50HZ/3P 220V±10%, 60HZ AIR SYSTEM Operating Pressure Bar ≤9 ≤9 ≤9 ≤9 ≤9 ≤9 ≤9 LP Air Consumption L/min 1600 1600 1000 1000 2000 2000 2000 Blowing Pressure Bar ≤35 ≤35 ≤35 ≤35 ≤35 ≤35 ≤35 HP Air Consumption L/min 1600 2000 3200 4000 48000 6000 8000 MOLD COOLING WATER Temperature Range ºC 10-20 10-20 10-20 10-20 10-20 10-20 10-20 Cooling Power HP 3 3 5 5 8 8 8 MACHINE Machine Size M 2.0x1.5x2.0 2.0x1.8x2.2 4.0x1.8x2.1 4.8x2.0x2.2 4.8x2.0x2.1 5.8x2.2x2.2 6.28x2.25x1.9 Machine Weight KG 1800 2000 3500 4500 5500 6000 7500 Attention The output is based on 500ml 18g In order to make the equipment more energy-saving, stable and high efficiency parameters will continue to be updated based on the actual product. Items Brand air-break switch MITSUBISHI relay OMRON option switch Schneider green directive button Schneider emergency stop switch Schneider normally open contact Schneider normally closed contact Schneider photoelectric switch China travel switch OMRON proximity switch China photoelectric switch China Blowing valves Quanjia Action valves AIRTAC Rotary cylinder AIRTAC other cylinders AIRTAC touch screen WEINVIEW PLC MITSUBISHI Auxiliary Equipment: 1.HP- air compressor 2-34CSH-1830 Air compressor Unit 3.2M3/30KG Volume M3 3.2 Pressure Kg 30 Speed r/min 760 Power KW 18.5x2 Overall Dimension mm 2800*12

China Factory Price Automatic 4~8 Cavity Pet Bottle Blowing Machine for Making 200ml~2L Plastic Bottles and Drums

PP PC Injection Blow Molding Machine

Jwell Full Electric Automatic Servo Blow Molding Machine for HDPE Plastic Sopladora De Botellas for Manufacturing Plastic Extruder Machine