Basic Info.
Product Name
Exterior/Indoor Wall Paint
Transport Package
20kg/Barrel
Product Description
WALL PUTTY
Product description: Single-component dry powder putty for interior wall made of high-quality natural powder and special compound additives. This product has a fine and uniform effect after scraping, high whiteness, acid and alkali resistance, strong bonding with the base, strong adhesion, and filling Well, it is not easy to crack, easy to scrape, easy to sand. After opening the bag, it can be used by stirring with water, convenient construction, safety and environmental protection. This product is suitable for general environment and top surface treatment.
Features: Product quality complies with JG / T298-2010 Chinese industry standards, and environmental protection complies with Chinese national standards GB18582-2008. National Architectural Association high-tech technical formula. Leading technology, excellent quality and environmental protection.
The product has the following advantages: 1. Green and environmental protection: Water is used as the solvent, without formaldehyde and ammonia. Really meet the high standards of "renovation, check-in".
2. Inorganic antifungal agent, long antibacterial time.
3. The surface layer feels smooth and delicate, high whiteness, and the surface has high brightness and hardness after polishing.
4, good construction performance, fire and moisture resistance, water resistance.
Functional product classification: Respiratory putty: It can adjust the indoor air humidity and maintain a certain humidity. Insect repellent putty: It can repel tiny harmful insects, such as worms and white ants. Passive negative ion release putty: long-term release of negative ions, reduce free radicals in the body, delay aging, improve sleep, deodorize, antibacterial, and enhance human comfort. Stir and mix: First add water to the container in proportion, then slowly pour in the powder, and at the same time, electrically stir to form a paste without agglomeration, leave it for 5 minutes, and then use it with a little stirring.
Construction steps: 1. Before construction, ensure that the base layer is fully dry, strong, and free of oil and other loose materials. If the original grassroots wall has been approved of old powder, gypsum powder, paper tendon lime, etc., it must be completely removed; 2. The recommended formula ratio of this product is: "powder: water = (2.5-3): 1", formulated into a uniform paste, the consistency is subject to convenient construction; 3. Batch scraping should be carried out in stages. It is recommended that the thickness of a single batch of scraping should not exceed 2mm, preferably 1mm / pass. This is mainly because thin batch batching is more conducive to improving the strength of the putty and the delicate state after batch scraping. While reducing the risk of cracking; 4. Use batch scraping tools for construction. The number of batch scraping lanes should be no less than 2 times. The scraping time of one batch of putty before the batch scraping interval is judged. The construction interval is 2-4 hours (depending on the weather). In the last pass, the bottom layer has high water absorption and fast drying speed. Therefore, after the surface watermark disappears, it must be flattened or polished (the actual operation is about 1-2m², which can be flattened or polished). 5. Decorative coatings: Use fine sandpaper to smooth the knife marks or irregularities left in the construction within 1-2 days. After the sanding, clean the flour dust on the interior wall. The putty layer after scraping can be properly cleaned with water. It can accelerate the decay of alkalinity. After 3-7 days, when the PH value reaches the coating requirements, various coatings can be applied. Batch scrape and wait for the putty layer to dry completely before sanding and coating construction. Recoat time: (based on dry film 40 microns, 25-30 ° C) The interval between two batches of scraping before one batch of putty is used as the basis for judgment, and the next batch can be scraped after being dried.
Precautions: 1. Mixing ratio-powder: water = (2.5-3): 1;
2. The construction temperature is recommended to be above 5 ºC, the moisture content of the grassroots is below 10%, the relative humidity of the air is ≤85%, the PH value is below 9, and the temperature is 10 ºC;
3. After using the latex paint on the old wall, use this product directly, the chemical reaction will occur, and the coating may turn yellow. It is recommended to test for no yellowing before using it in large quantities. If yellowing occurs and the bottom layer has to undergo effective interface treatment, this product can be used, or the old wall can be used to renovate putty (two-component): 1.2kg / m² / mm
4. The putty can be used for about 3 hours at room temperature;
5. Don't mix the putty which has been dried after mixing with water again;
6. It is recommended to use the product after opening once. Unused products should be stored and used as soon as possible to avoid being affected by moisture.
7. This product is alkaline. Avoid prolonged contact with the skin, avoid a large amount of dust inhalation, and pay attention to the protection of the eyes. If you accidentally get into the eyes, immediately rinse with water and consult a doctor as soon as possible. 8. Can not be scraped on special materials such as wooden boards, special boards, old tile surfaces.
Remarks: Storage period: 12 months, stored in a cool and dry place Recommended dosage: (0.8 ~ 1.2) kg / sqm / channel, the actual dosage will vary depending on the flatness of the wall, whichever prevails. storage method: Store in a cool, dry place with good moisture-proof and waterproof measures. Unopened products can be stored for 12 months.
Address:
Shage Xiachi, Maoming, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Construction & Decoration
Management System Certification:
ISO 9001
Company Introduction:
Ounded in 2002, Maoming Aobang Coating Co., Ltd. Is a large-scale modern architectural coatings enterprise specializing in R&D, production and sales. The company has advanced production equipment and professional senior R&D engineers team to continuously innovate new products and improve The quality of the original products to meet the ever-increasing market consumption needs; With a group of professional management team and marketing team, the company continues to develop.
The company specializes in water-based paints, colorful texture coatings, waterproof coatings, dry mortars, base treatment materials and adhesives. It is now a series of new environmentally friendly products; Now the company has "American Aobang", "Bondiwei", "Aobang Leshi" The three major brands have won the trust of our customers with three-dimensional marketing mode and professional service; We have established long-term good cooperation and win-win partnership with many distributors. Established a strong sales network in major provinces and cities in China.
In order to continue the market growth and to quickly meet the needs of customers, the company has established three production bases: Zhongshan Meiaobang Building Materials Co., Ltd., Guangxi Guiping Meiaobang Building Materials Co., Ltd., Maoming Aobang Coating Co., Ltd. At the same time, in order to ensure product quality, the company has maintained good cooperative relations with many multinational chemical companies such as DuPont, Bayer, BASF and WACKER, and provided strong technical support for product research and development and innovation.
Companies adhering to the "high quality, good quality, integrity, mutual benefit" business philosophy, "advocate quality, responsibility first" spirit of enterprise, "Let every family live a healthy, happy, colorful life" mission, dedicated service to customers, serve the society.
Excellent quality, outstanding performance - Aobang paint!