Mr. Yi. Chen
Address:
Room 803, Chevalier House, 45-51 Chatham Road South, Tsim Sha Tsui, Kowloon, Hong Kong, Suzhou, Jiangsu, China
Telephone:
Zip Code:
Fax:
| Please sign in to view contact details |
Account Registered in:
2022
Business Range:
Light Industry & Daily Use, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Business Type:
Manufacturer/Factory
Company Introduction
Production Capacity
Ensoft - S® - SEBS
Is our brand name for compounds based on saturated styrenic block copolymer SEBS (styrene-ethylene-butylene-styrene) and polyolef ins mainly Polypropylene (PP). The compounds have excellent rubberlike elasticity and weathering resistance. Ensoft-S® Range can easily be self-colored with the use of proper Masterbatch or provided as pre-colored compounds. Typical ...
Is our brand name for compounds based on saturated styrenic block copolymer SEBS (styrene-ethylene-butylene-styrene) and polyolef ins mainly Polypropylene (PP). The compounds have excellent rubberlike elasticity and weathering resistance. Ensoft-S® Range can easily be self-colored with the use of proper Masterbatch or provided as pre-colored compounds. Typical ...
Ensoft - S® - SEBS
Is our brand name for compounds based on saturated styrenic block copolymer SEBS (styrene-ethylene-butylene-styrene) and polyolef ins mainly Polypropylene (PP). The compounds have excellent rubberlike elasticity and weathering resistance. Ensoft-S® Range can easily be self-colored with the use of proper Masterbatch or provided as pre-colored compounds. Typical properties of Ensoft-S® Series are given below.
General Properties:
* Hardness range from 5 Shore A to 60 Shore D
* Service Temperature: -50° C - +110° C (dynamic) -50- + 120° C (Static/Peak)
* Excellent ozone, UV and weather resistance due to saturated elastomeric phase
* Chemical resistance against many aggressive media
* Low compression set and good elasticity in a wide temperature range
* Ease of processing (no pre-drying is required) and recyclability
Special Ensoft-S® Series Have Following Properties:
* FDA Compatible
* Adhesion to a broad range of polar and non-polar substrates
Such as PP, PA, ABS, PC, PS.
* High temperature resistance
* Low fogging
* High transparency
* Low compression set at high temperatures
* Expandable
* Excellent abrasion resistance
* Flammability (UL 94 V0)
* CSTB, RAL GZ-716 /1 approvals
Possible Applications:
Automotive; Bellows, boots and grommets, air ducts and overmolded duct seals, lens gaskets, fender guards, sun visors, soft touch interior components, glass encapsulations
Appliance / Houseware: Overmolded grips for power tools, dishwasher & refrigerator seals, gaskets, anti-vibration parts, drainage/discharge hoses and fittings
Electricity & Electronic: Molded-in seals for electrical components, wire and cable insulation and termination boots, connectors and housings
Health & Care: Toothbrushe handles, shaver handles, handles for other personal care utensils
Enflex - V® - TPV
Enflex-V® Is our brand name for dynamically vulcanized ethylene/propylene/diene (EPDM) and Polypropylene (PP) blends. Fully cured EPDM particles that are homogenously distributed in the thermoplastic polypropylene phase give these compounds unique rubber-like properties, with the advantage of thermoplastic processing techniques. Enflex-V® Range can be self-colored with the use of proper MB or provided as pre-colored compounds. Typical properties of Enflex-V® Series are given below.
General Properties:
* Hardness range from 45 Shore A to 60 Shore D
* Service Temperature: -50° C - +125° C (dynamic) -50- + 135° C (Static/Peak)
* Excellent ozone, UV and weather resistance due to saturated elastomeric phase
* Chemical resistance to aggressive mediums
* Very Low (Rubberlike) compression set and good elasticity (that does not change
Significantly over time) in a wide temperature range.
Special Enflex-V® Series have following properties:
* Adhesion to a broad range of polar and non-polar substrates such as PP, PA, ABS, PC
* Broad product range including Halogen Free FR, improved oil resistance, improved temperature resistance, high flow and other specialty grades.
* Recyclability and lower processing costs with respect to traditional cured rubbers
* Lower density
* Very good resistance to "fatigue" and tear strength
* Low fogging
* Flammability (UL 94 V0)
* CSTB, RAL GZ-716/1 approvals
Possible Applications
Automotive - Interior: Interior console parts, Anti-slip pads, Gearbox cover, Gear handle, Car mats,
Seals for air ducts, Seatbelt covers, Car seat adjusting lever, Airbag covers
Automotive - Exterior: Body gasket and seals, Seals/Gaskets for signal indicators, headlamps, mirrors, Mud flap, Window seals and encapsulation, Spoilers and edge trims
Automotive - Under the hood: Bellows and gommets, Seals for electric housings, Air ducts and duct seals
Is our brand name for compounds based on saturated styrenic block copolymer SEBS (styrene-ethylene-butylene-styrene) and polyolef ins mainly Polypropylene (PP). The compounds have excellent rubberlike elasticity and weathering resistance. Ensoft-S® Range can easily be self-colored with the use of proper Masterbatch or provided as pre-colored compounds. Typical properties of Ensoft-S® Series are given below.
General Properties:
* Hardness range from 5 Shore A to 60 Shore D
* Service Temperature: -50° C - +110° C (dynamic) -50- + 120° C (Static/Peak)
* Excellent ozone, UV and weather resistance due to saturated elastomeric phase
* Chemical resistance against many aggressive media
* Low compression set and good elasticity in a wide temperature range
* Ease of processing (no pre-drying is required) and recyclability
Special Ensoft-S® Series Have Following Properties:
* FDA Compatible
* Adhesion to a broad range of polar and non-polar substrates
Such as PP, PA, ABS, PC, PS.
* High temperature resistance
* Low fogging
* High transparency
* Low compression set at high temperatures
* Expandable
* Excellent abrasion resistance
* Flammability (UL 94 V0)
* CSTB, RAL GZ-716 /1 approvals
Possible Applications:
Automotive; Bellows, boots and grommets, air ducts and overmolded duct seals, lens gaskets, fender guards, sun visors, soft touch interior components, glass encapsulations
Appliance / Houseware: Overmolded grips for power tools, dishwasher & refrigerator seals, gaskets, anti-vibration parts, drainage/discharge hoses and fittings
Electricity & Electronic: Molded-in seals for electrical components, wire and cable insulation and termination boots, connectors and housings
Health & Care: Toothbrushe handles, shaver handles, handles for other personal care utensils
Enflex - V® - TPV
Enflex-V® Is our brand name for dynamically vulcanized ethylene/propylene/diene (EPDM) and Polypropylene (PP) blends. Fully cured EPDM particles that are homogenously distributed in the thermoplastic polypropylene phase give these compounds unique rubber-like properties, with the advantage of thermoplastic processing techniques. Enflex-V® Range can be self-colored with the use of proper MB or provided as pre-colored compounds. Typical properties of Enflex-V® Series are given below.
General Properties:
* Hardness range from 45 Shore A to 60 Shore D
* Service Temperature: -50° C - +125° C (dynamic) -50- + 135° C (Static/Peak)
* Excellent ozone, UV and weather resistance due to saturated elastomeric phase
* Chemical resistance to aggressive mediums
* Very Low (Rubberlike) compression set and good elasticity (that does not change
Significantly over time) in a wide temperature range.
Special Enflex-V® Series have following properties:
* Adhesion to a broad range of polar and non-polar substrates such as PP, PA, ABS, PC
* Broad product range including Halogen Free FR, improved oil resistance, improved temperature resistance, high flow and other specialty grades.
* Recyclability and lower processing costs with respect to traditional cured rubbers
* Lower density
* Very good resistance to "fatigue" and tear strength
* Low fogging
* Flammability (UL 94 V0)
* CSTB, RAL GZ-716/1 approvals
Possible Applications
Automotive - Interior: Interior console parts, Anti-slip pads, Gearbox cover, Gear handle, Car mats,
Seals for air ducts, Seatbelt covers, Car seat adjusting lever, Airbag covers
Automotive - Exterior: Body gasket and seals, Seals/Gaskets for signal indicators, headlamps, mirrors, Mud flap, Window seals and encapsulation, Spoilers and edge trims
Automotive - Under the hood: Bellows and gommets, Seals for electric housings, Air ducts and duct seals
Factory Address:
Room 803, Chevalier House, 45-51 Chatham Road South, Tsim Sha Tsui, Kowloon, Hong Kong, Suzhou, Jiangsu, China
