Basic Info.
Model NO.
HLK-LD2410B bare board / with pins
Transport Package
Sandrad Packing(Carton, Box)
Product Description
1. Product introduction
LD2410B is a high-sensitivity 24GHz human presence status sensing module developed by Hilink Electronics. Its working principle is to use FMCW frequency-modulated continuous wave to detect human targets in the set space. Combined with radar signal processing and accurate human body sensing algorithms, it realizes high-sensitivity human presence status sensing, and can identify human bodies in motion and stationary states. And auxiliary information such as the distance of the target can be calculated.
This product is mainly used in indoor scenes to sense whether there is a moving or micro-moving human body in the area, and output the detection results in real time. The farthest sensing distance can reach 5 meters, and the distance resolution is 0.75m. Provides a visual configuration tool, which can easily configure the sensing distance range, sensing sensitivity in different intervals and unmanned delay time, etc., to adapt to different specific application needs. Support GPIO and UART output, plug and play, and can be flexibly applied to different smart scenarios and terminal products.
2. Product feature - Plug and play, easy assembly
- The longest sensing distance is up to 5 meters
- Large detection angle, coverage up to ±60 degrees
- Accurate identification within the interval, support the division of the sensing range, and shield the interference outside the interval
- Multi-level intelligent parameter adjustment can be realized through Bluetooth or serial port to meet the needs of scene changes
- Visual debugging and configuration tools
- Small and simple, the minimum size is only 7mmx35mm
- Supports various installation methods such as ceiling hanging and wall hanging
- 24GHz ISM band, can be certified by FCC and CE spectrum regulations
- The ultimate cost-effective choice
3. Application scenarios
The LD2410B human body sensing module can detect and identify the human body in motion, fretting, standing, sitting and lying down. It supports multi-level parameter adjustment and can be widely used in various AIoT scenarios. The common types are as follows:
*Human body sensor light controlIt senses whether there is someone in the space, and automatically controls lights, such as lighting equipment in public places, various sensor lights, bulb lights, etc.
*Human body induction wake-up of advertising screen and other equipmentAutomatically turn on when people come, and automatically sleep when no one comes to save power, information delivery is more accurate and efficient.
*Life safety protectionUV lamp work protection, to prevent the UV lamp from being turned on when there are people around and causing personal injury;
Automatic detection and alarm of dangerous places to prevent people from entering specific high-risk spaces, such as high-risk places entered by personnel from coal mine blasting.
*Smart home appliancesWhen there is no one in the room for a long time, the TV, air conditioner and other electrical appliances are automatically turned off, saving energy and safety.
*Intelligent securityDetection and identification of people intruding, staying, etc. within the specified range.
4. Performance and electrical parametersOperating frequency | 24GHz~ 24.25GHz Compliant with FCC, CE, non-commission certification standards |
Operating Voltage | DC 5V, power supply capacity>200mA |
Average operating current | 79 mA |
Modulation | FMCW |
Interface | A GPIO, IO level 3.3V A UART |
Target application | Human presence sensor |
Detection distance | 0.75m ~ 6m, adjustable |
Detection angle | ±60 ° |
Distance resolution | 0.75m |
Sweep Bandwidth | 250MHz Compliant with FCC, CE, non-commission certification standards |
Ambient temperature | -40 ~ 85ºC |
Dimensions | 7mm x 35 mm |
6. Our CompanyShenzhen Hi-Link Electronic Co., Ltd was founded in 2009. It is a high-tech enterprise focusing on WiFi module, Bluetooth module and power module, integrating R & D, production and sales services. On October 20th, 2016, it was listed in Qianhai equity center with stock code of 668537. Hi-Link is located in Shenzhen and partner factory in Dongguan.
Hi-Link has strong R & D strength and a number of independent intellectual property rights. The core R & D personnel are from well-known listed companies with years of experience in IOT industry. Hi-Link has been working as a "reliable partner"with customers, suppliers, contractors and employees to build long lasting mutual trust relationships based on the spirit of "good intentions" and always adhering to the product policy of "creating value, customer first, following the trend and striving for improvement". We are committed to making each intelligent product more convenient, faster and more reliable and providing customers with safe, high-quality and reliable products is our eternal pursuit.
Address:
Room 1705, 1706, 1709a, 17th Floor, Building E, Xinghe World, Minle Community, Minzhi Street, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics
Management System Certification:
ISO 9001
Company Introduction:
We are manufacturer of AC DC&DC DC power mdoule, radar sensor module and WiFi router module for many years. We keep high quality and competitive factory price and beautiful design, manufacturer strength. We believe we are your best choice. If you have any question pls do not hesitate to contact us.