Basic Info.
Way of Control
Hand Control
Communication Mode
Wiegand26/34
Product Description
| Product name | ID/IC access control machine | Operating Voltage | DC12V |
| Operating temperature | -20ºC~70ºC | User capacity | Ten thousand user card (ID/IC optional) |
| Sensing distance | 3~15CM | Card frequency | ID card 125KHZ,IC card 13.56Mhz |
| Unlock current | ≤2000MA | Product Size | 122mm*46mm*23mm or 122mm*76mm*23mm |
| Product material | The shell is made of ABS flame retardant material, and the internal glue is sealed and waterproof. | Scope of application | Warehouses, hotels, shopping malls, parking lots, libraries, office buildings, membership management and other places |
2. An external WG read head can be connected to realize the management of incoming and same two-way card swiping;
3. With waterproof function, it can be installed outdoors;
4. The access control machine has light prompts;
5. Support management card (add card, delete card and combine two into one);
6. Support normally open and normally closed functions;
7. Support a variety of appearance options, please consult customer service staff for detailsInstructions1. Set the management card and initialize the access control machine
When the access control machine is powered off, turn 1 of the red DIP switch on the access control machine to the ON position, and the door
Power off the machine, the access control machine will turn on the green light and wait for 5 seconds to swipe the management card (note that the management card must be placed within these 5 seconds
to the access control machine), if you hear two beeps and the traffic lights flash at the same time, it means that the management card has been added successfully and the initial
Initialization succeeded. If you do not swipe the management card and wait for 5 seconds, the access control machine will automatically initialize successfully.
To replace the management card, this process needs to be repeated, and the new management card will overwrite the original management card.
2. Format memory data
When the access control machine is powered off, turn the 2 of the red DIP switch on the access control machine to the ON position, and then
Power on, the green light of the access control machine will flash, then turn the 1 of the DIP switch to the ON position, and hear two beeps,
The traffic lights will flash at the same time, the user data in the memory will be cleared, and the dialing code 1 and 2 will be dialed at the same time to complete.
3. Set the door opening delay time
Dial 1 and 2 of the red DIP switch on the access control machine to the ON position at the same time, then turn on the power again, the red light and
The green lights are on together, swipe the management card (only the management card can be swiped, other cards are invalid). The swipe buzzer will beep
Two beeps, swiping the card once means a delay of one second, swiping the card several times is a delay of several seconds, and if the card is not swiped after the power is turned on, the
Indicates that the door opening delay is zero seconds. After the delay is set, the power is turned off, and the setting of the door opening delay is completed after the power is turned on.
Note: The default door opening delay of the initialization controller is 1 second.
4. Add user card
Power on the controller to work, swipe the management card once, wait for one second, the red light is off, the green light is flashing, and the swipe
If there is no registered card, there will be two beeps, indicating that the addition is successful. If you swipe the added card, you will hear a long beep
If it rings, it means that this is an added user card and cannot be added any more. After adding all user cards, swipe the management card
Exit the program of adding user card, if you do not swipe the management card, it will automatically exit the program of adding user card after waiting for ten seconds.
5. Delete user card
Power on the controller to work, swipe the management card twice within one second, the red light is off, the green light is on, and the card to be deleted is swiped.
If you delete the registered user card, you will hear two beeps, indicating that the deletion of the user card is successful; if it is not registered
User card, you will hear a long beep. After deleting the user card to be deleted, swipe the management card to exit the deletion.
User card program, if you do not swipe the management card, wait ten seconds to automatically exit the user card deletion program.
Address:
302, No. 3, Laiyin Road, Xinsheng Community, Longgang Street, Longgang District, Shenzhen Guangdong, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Security & Protection
Company Introduction:
Shenzhen Keaote Electronic Technology Co., Ltd. is a professional company dedicated to the research and development, production and sales of security products for contactless ID/IC card readers, access control controllers, attendance machines, consumer machines, access control management systems. The company is committed to continuously developing new products, developing new markets, vigorously promoting "5S" management, and strengthening the concept of civilized production. With good credit and excellent service, we have established long-term cooperative relations with many enterprises. Over the years, the full range of products have spread throughout Guangdong Pearl River Delta, East China, Central China and Northeast China, Europe, America, Hong Kong and Southeast Asia and other regions, winning the trust of our customers. We will adhere to the tenet of "quality, service and reputation first", with a professional and innovative business philosophy, and with a professional spirit of efficiency first, to create brilliance with new and old customers!
