ISO 7765 ASTM D1709 Falling Dart Impact Tester/Falling Dart Impact Test Machine
| FOB Price: | US$3,000.00 / Piece |
|---|---|
| Min. Order: | 1 Piece |
| Min. Order | FOB Price |
|---|---|
| 1 Piece | US$3,000.00/ Piece |
| Port: | Shenzhen, China |
|---|---|
| Payment Terms: | L/C, T/T, D/P, Western Union, Paypal, Money Gram |
Product Description
Company Info
Product Description
Principle & Standards
Principle
Before starting the test, choose test method, and estimate an initial mass and Δm. Start the test. If the first specimen fails, decrease the mass of the falling dart by Δm. If the first specimen is not a failure, increase the mass of the falling dart by Δm. Continue the test according to this rule. In brief, increase or decrease by Δm according to whether the former specimen is a failure or not. After 20 specimens, calculate the total number of failed specimens N. If N equals to 10, the test is over. If N is less than 10, add specimens and continue to test until N equals to 10. If N is greater than 10, add specimen and continue the test until the number of non-failure specimens reaches 10. Then the tester calculates the test results automatically according to specific formulas.
Standards
GB/T 9639.1-2008,ISO 7765-1-1988, ASTM D1709,JIS K7124-1
Applications Specifications
Basic Applications ·Impact resistance test of plastic films, sheets and composite films e.g. PE preservative films, wrapping films, PET sheets and other food package and heavy packages
·Impact resistance test of aluminum foils and aluminum plastic composite films
·Impact resistance test of paper and paper board
Extended Applications Test the resistance of the specimen against the falling ball. Mount the specimen on specific clamp for falling ball impact test and select falling ball of certain weight for the impact test. Check the status of the specimen and determine the impact resistance of the specimen
Impact test of shoulder lining. Mount the shoulder lining specimen to the specified clamp and select falling dart of certain weight for impact test. Check the status of the specimen and determine the impact resistance of the shoulder lining specimen.
Before starting the test, choose test method, and estimate an initial mass and Δm. Start the test. If the first specimen fails, decrease the mass of the falling dart by Δm. If the first specimen is not a failure, increase the mass of the falling dart by Δm. Continue the test according to this rule. In brief, increase or decrease by Δm according to whether the former specimen is a failure or not. After 20 specimens, calculate the total number of failed specimens N. If N equals to 10, the test is over. If N is less than 10, add specimens and continue to test until N equals to 10. If N is greater than 10, add specimen and continue the test until the number of non-failure specimens reaches 10. Then the tester calculates the test results automatically according to specific formulas.
Standards
GB/T 9639.1-2008,ISO 7765-1-1988, ASTM D1709,JIS K7124-1
Applications Specifications
Basic Applications ·Impact resistance test of plastic films, sheets and composite films e.g. PE preservative films, wrapping films, PET sheets and other food package and heavy packages
·Impact resistance test of aluminum foils and aluminum plastic composite films
·Impact resistance test of paper and paper board
Extended Applications Test the resistance of the specimen against the falling ball. Mount the specimen on specific clamp for falling ball impact test and select falling ball of certain weight for the impact test. Check the status of the specimen and determine the impact resistance of the specimen
Impact test of shoulder lining. Mount the shoulder lining specimen to the specified clamp and select falling dart of certain weight for impact test. Check the status of the specimen and determine the impact resistance of the shoulder lining specimen.
Technical Specifications
Test Method Method A or Method B is optional
Test Range Method A: 50~2000 g
Method B: 300~2000 g
Accuracy 0.1 g (0.1J)
Specimen Clamp Pneumatic Clamp
Pressure of Gas Supply 0.6 MPa (outside of supply scope)
Port of Gas Supply Φ8 mm PU Tubing
Specimen Size > 150 mm x 150 mm
Power Supply AC 220V 50Hz
Net Weight 70 kg
Standard configuration:
Method A Accessories and Micro Printer
Optional Parts:
Method B Accessories, Professional Software and Communication Cable
Test Method Method A or Method B is optional
Test Range Method A: 50~2000 g
Method B: 300~2000 g
Accuracy 0.1 g (0.1J)
Specimen Clamp Pneumatic Clamp
Pressure of Gas Supply 0.6 MPa (outside of supply scope)
Port of Gas Supply Φ8 mm PU Tubing
Specimen Size > 150 mm x 150 mm
Power Supply AC 220V 50Hz
Net Weight 70 kg
Standard configuration:
Method A Accessories and Micro Printer
Optional Parts:
Method B Accessories, Professional Software and Communication Cable
Address:
No3, Jianye Road, Yongqing Industrial 3 Area, Yongqing Towner, Daojiao, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Instruments & Meters
Management System Certification:
ISO 9001
Company Introduction:
Our company is one specialized is engaged in the collection of testing equipment research and development, production, OEM, sales for the integration of science and technology equipment manufacturing private enterprise, specializing in all kinds of physical property test of engineering plastics for more than ten years, mainly focus on the plastic material tensile, bending, melt index, the impact strength and thermal deformation vicat, water testing, aging performance test
