Basic Info.
After-sales Service
12 Months Warranty & Life-Time Sale Service
Warranty
12 Months Warranty & Life-Time Sale Service
Type
Finished Batteries Tester
Application
Lithium-ion Battery
Product Description
18650 26650 32650 Battery pack Test tester System For Electric Car Battery Pack multifunction Testing 100V 300A
Function Features
Battery Comprehensive testing machine is a device for quickly and accurately testing the performance of finished batteries. The main test items are: no-load voltage, AC internal resistance, AC internal resistance, charging current, charging voltage, discharging current, load voltage, overcurrent protection current, overcurrent recovery Testing of voltage and short circuit protection time. The system uses a 32-bit ARM processor, and a 16-bit AD converter for voltage and current. Compared with similar equipment, the test speed is faster, the test accuracy is high, and multiple devices are supported simultaneously.
Test items
1. No-load voltage: test the voltage at both ends of the open circuit of the battery.
2. AC internal resistance: test the resistance of the open circuit positive and negative ends of the battery.
3. DC internal resistance: test the resistance at both ends of the battery discharge circuit
4. Discharge test: test the continuous load capacity of the battery, let the battery continue to discharge for a certain period of time to check the voltage drop.
5. Discharge overcurrent test: test the battery high current discharge protection function, the battery high current discharge triggers the discharge overcurrent protection function of the battery protection board.
6. Short circuit protection: test the battery cut-off protection time (microsecond level) when the positive and negative electrodes of the battery are short-circuited.
7. Charging test: test the continuous charging function of the battery, and test whether the battery charging function is good.
8. Charging overcurrent test: test the battery high current charging protection function, the battery high current charging triggers the battery protection board charging current protection function
Shenzhen AITOP Intelligent Equipment Co., Ltd.
No. | Name | Content | Unit | Remarks |
1 | Maximum voltage range | 100 | V | Direct current |
2 | Voltage measurement accuracy | ±0.01V | - |
3 | Maximum discharge current | 300 | A | Optional |
4 | Discharge current measurement accuracy | ±0.01A | - |
5 | Maximum charging current | 15 | A | Optional |
6 | Charging current measurement accuracy | ±0.01A | - |
7 | Maximum range of AC internal resistance | 2000 | Ω | - |
8 | AC internal resistance measurement accuracy | 0.1 | mΩ | - |
9 | Maximum range of DC internal resistance | 5000 | mΩ | - |
10 | DC internal resistance measurement accuracy | ±0.05mΩ | - |
11 | Overcurrent protection current | 10~300 | A | - |
12 | Short circuit resistance | 60~80 | mΩ | New national standard(60~100mΩ) Other can customized Minimum 20mΩ |
13 | Barcode function | 3~30 | Bit | Optional |
14 | input power | 1800 | W | Optional |
15 | Maximum load power | 33 | KW | Optional |
16 | One-dimensional code, two-dimensional code compatible reading | - | - | Optional |
100V battery PACK tester charge and discharge aging cabinet with best price
Functional Features
The charge discharge aging system mainly includes PC software, USB hub, router, aging instrument. The core is aging instrument, aging 32 bit ARM chip was chosen as main control chip, compared to the traditional microcontroller in the execution speed greatly improved, measuring voltage and current accuracy is higher, through the RS232, network transmission data.
1. With constant current and constant voltage charging function
2. With constant current discharge function
3. Fully meet the battery charge and discharge with mouth and separation requirements, that is, 2 lines (P+ P-) and 3 lines (P+ P- C-). At the same time, the CH+ P+ P- can be used to protect the negative plate discharge by aging the positive plate charging protection.
4. By charging and discharging the battery, the charge protection and discharge protection of the battery can be detected.
5. Charge and discharge the battery, record the charge capacity and discharge capacity of the battery.
6. Anti reverse protection function, upper and lower voltage set protection, safety discharge current protection (maximum current 20A);
7. Within 10 machines, through the serial port to connect the PC computer;; more than 10 sets of equipment, you can use the network connection mode. In this way, PC computer only need to provide a network port, you can control less than 254 instruments.
8. Aging instrument software system using the classic mature C/S model
9. Based on the Windows interface, the use of MYSQ database storage test data, and can export curves.
Voltage:10-100V
Current: charge range:0-10000mA
discharge range:0-20000mA
Charge:Min10mA
Discharge power :below 1400W
Time : Patrol time :under 5s
Timer range :0-999hours /step
Machine Specification
Input Power | AC 220V ±10% / 50Hz |
voltage | measuring range | 10~100V |
precision | ±(0.2% of reading + 0.2% of range) |
current | Charge range | 0~10000mA |
Charge accuracy | ±(0.2% of reading + 0.2% of range) |
Discharge range | 0~20000mA (Max discharge power: 1400W) |
Discharge precision | ±(0.2% of reading + 0.2% of range) |
charge | Constant voltage cut-off current | Min 10mA |
volume | precision | ±1‰ |
power | discharge power | <=1400W |
time | Patrol time | <5S |
Timer Range | 0~999hours/step |
Data recording interval | ≥5S |
Median machine version | 1.1 series |
charge | charge mode | Constant current and constant voltage charging |
cut-off condition | Voltage, current, relative time, overcharge protection |
discharge | discharge mode | constant-current discharge |
cut-off condition | relative time, voltage, discharge protection |
circulate | Range of cycle measurement | 1~999 times |
Single cycle step number | 100 |
Voltage and current sampling | Four wire connection |
noise | <50dB |
data base | My SQL |
Host computer communication mode | TCP/IP |
Data output mode | EXCEL,TXT,chart |
CI | ethernet |
Number of channels per cabinet | 7 |
Case size | W*D*H:45*30*17(cm) |
Cabinet size | W*D*H:98*60*180(cm) |
Explosion-proof warehouse size | W*D*H:25*60*17(cm) |
Machine Specification
No | Item | Item | |
1 | Power supply | AC220V 50Hz |
2 | Power | 2000W |
3 | Voltage | Test range | 0-100V |
4 | Accuracy | ±(0.2% of reading +0.2% of range) |
5 | Current | Charge range | 200-20000mA |
6 | Charge accuracy | ±(0.2% of reading +0.2% of range) |
7 | Discharge range | 200-40000mA |
8 | Discharge accuracy | ±(0.2% of reading +0.2% of range) |
9 | Charge | Constant voltage cut-off current | Min 200mA |
10 | Capacity | Accuracy | ±1‰ |
11 | Power | Discharge power | ≤4000w |
12 | Time | Inspection time | <2s |
13 | Timing range | 0-999 h/steps |
14 | Data record interval | ≥5s |
15 | Channels per box | 1 |
16 | Charge | Charge mode | Constant current and constant voltage charging |
17 | Cut-off condition | Voltage, current, relative time, overcharge protection |
18 | Discharge | Discharge mode | Constant current discharge |
19 | Cut-off condition | Voltage, relative time, overcharge protection |
20 | Cycle | Cycle test range | 1-999 times |
21 | Max steps in one cycle | 100 |
22 | Voltage current sample | 4 wires |
23 | Database | SQL |
24 | Communication | TCP/IP, Serial port |
25 | Data output | EXCEL, TXT |
26 | Size | 800*520*1370mm |
27 | Battery cabinet size | 720*400*420mm |
Machine scope of application
The finished battery charge and discharge machine can used for test Lithium batteries,polymer batteries,lead-acid batteries ect,we have 30V/70V/100V for options
Battery Pack Testing Machine,battery charge discharge tester,battery charge discharge test system
Machine features
Battery Pack Testing Machine,Battery Charge Discharge Tester,Battery Charge Discharge Test System
Function Features:
The charge discharge aging system mainly includes PC software, USB hub, router, aging instrument. The core is aging instrument, aging 32 bit ARM chip was chosen as main control chip, compared to the traditional microcontroller in the execution speed greatly improved, measuring voltage and current accuracy is higher, through the RS232, network transmission data.
1. With constant current and constant voltage charging function
2. with constant current discharge function
3. fully meet the battery charge and discharge with mouth and separation requirements, that is, 2 lines (P+ P-) and 3 lines (P+ P- C-). At the same time, the CH+ P+ P- can be used to protect the negative plate discharge by aging the positive plate charging protection.
4. by charging and discharging the battery, the charge protection and discharge protection of the battery can be detected.
5. charge and discharge the battery, record the charge capacity and discharge capacity of the battery.
6., anti reverse protection function, upper and lower voltage set protection, safety discharge current protection (maximum current 20A);
7. Within 10 machines, through the serial port to connect the PC computer;; more than 10 sets of equipment, you can use the network connection mode. In this way, PC computer only need to provide a network port, you can control less than 254 instruments.
8 aging instrument software system using the classic mature C/S model
9. based on the Windows interface, the use of MYSQ database storage test data, and can export curves.
spc.
Input power:AC 220v+/-10%/50Hz
Voltage:10-100V
Current: charge range:0-10000mA
discharge range:0-20000mA
Charge:Min10mA
Discharge power :below 1400W
Time : Patrol time :under 5s
Timer range :0-999hours /step
Input Power AC 220V ±10% / 50Hz
Voltage measuring range 0~70V
precision ±(0.2% of reading + 0.2% of range)
Current Charge range 0~5000mA
Charge accuracy ±(0.2% of reading + 0.2% of range)
Discharge range 0~10000mA
Discharge precision ±(0.2% of reading + 0.2% of range)
Charge Constant voltage cut-off current Min 10mA
Volume precision ±1‰
Power discharge power <=800W
Time Patrol time <2S
Time range 0~999hours/step
Data recording interval ≥5S
Median machine version 1.1 series
Charge charge mode Constant current and constant voltage charging
cut-off condition Voltage, current, relative time, overcharge protection
Discharge discharge mode constant-current discharge
cut-off condition relative time, voltage, discharge protection
Circulate Range of cycle measurement 1~999 times
Single cycle step number 100
Voltage and current sampling Four wire connection
Noise <50dB
Data base Managing test data with My SQL database
Host computer communication mode Based on TCP/ IP protocol, serial port
Data output mode EXCEL,TXT,chart
CI ethernet
Number of channels per cabinet 12
Case size W*D*H:45*30*17(cm)
Cabinet size W*D*H:90*60*190(cm)
VBattery Pack Testing Machine,Battery Charge Discharge Tester,Battery Charge Discharge Test System
MACHINE LIST:Cylindrical Battery Pack Assembly Machine |
Item No. | Product Name | Description |
1 | Internal Resistance Tester | 1. Voltage test V1: range : 0-4.999V |
2. Voltage test V2: range : 0-29.99V |
3. Resistance test R1: range : 0.1-200 mΩ |
4. Resistance test R2: range :1-2000 mΩ |
2 | 6/10/13 Channel Automatic Battery Sorter | 1.Sorting Speed:80PPM |
2.Suitable for:all types of cylindrical cell |
3 | Insulation Paper Sticking Machine | 1.Productivity:4000pcs/h; single 4pcs |
2.Suitable:one machine for one type cylindrical cell |
4 | Manual AC Pneumatic Spot Welder | 1.Welding Thickness:0.03-0.2mm |
2.Maximum power output of transformer:15 KVA |
5 | Manual DC Pneumatic Spot Welder | 1. Welding Thickness:0.03-0.25mm |
2. Maximum Output Short Circuit Current:5000A |
6 | Automatic 5000A/8000A Single Side Spot Welding Machine | 1. Spot Welding Speed:0.35s/point; 2800pcs / hour |
2. X-Y-axis Travel 500*500mm |
(can be customized according to request) |
7 | Automatic 5000A/8000A Double Sides Spot Welding Machine | 1. Spot Welding Speed:0.35s/spot, 5500pcs/h |
2.Y-Z-axis Travel500*500mm |
(can be customized according to request) |
8 | Automatic 5000A/8000A Single Side Rotary Welding Head Spot Welding Machine | 1. Welding Material: |
pure nickel sheet: 0.03-0.2mm |
Nickel-plated steel strip :0.03-0.3mm |
2. Maximum Spot Welding |
Speed:0.35S/point;2800pcs/h |
3. Maximum Stroke Size Range: |
X:500mm,Y:400 mm,Z:35mm, |
R:180º |
The distance between tooling platform and welding needle can be adjusted by 300 mm. |
9 | Automatic 5000A/8000A Double Sides Rotary Welding Head Spot Welding Machine | 1.Rotary Welding Head:R:180º |
The distance between tooling platform and welding needle can be adjusted by 300 mm. |
2. Welding Travel: |
Y: 500mm; Z; Z2:350mm(or 400mm) |
10 | Automatic Assembly Line Double Side Spot Welding Machine | Suitable for assembly line battery pack production |
11 | Battery Pack PVC Covering Machine | 1. Transmit Speed: |
0-15m/min |
2.Shrinking Speed:0-300C |
3.Load-bearing:30kg |
12 | 30V 10A 20A Battery Pack Aging Cabinet | 1.Voltage testing range:4.5-30V |
2.Charging range:50-10000mA |
3.Discharging range:50-20000mA |
4.Accuracy:±(0.2% of reading +0.2% of range) |
13 | 70V 5A 10A Battery Pack Aging Cabinet | 1.Voltage testing range:5-70V |
2.Charging range:50-5000mA |
3.Discharging range:50-10000mA |
4.Accuracy:±(0.2% of reading +0.2% of range) |
|
14 | 100V 10A 20A Battery Pack Aging Cabinet | 1.Voltage testing range:10-100V |
2.Charging range:50-10000mA |
3.Discharging range:50-20000mA |
4.Accuracy:±(0.2% of reading +0.2% of range) |
15 | Battery Pack Comprehensive Tester | 1.Voltage testing range:10-100V |
2.Charging range:50-10000mA |
3.Discharging range:50-20000mA |
4.Accuracy:±(0.2% of reading +0.2% of range) |
16 | BMS Tester | 1.Overcharge/Overdischarge Protection Voltage:0.5-5V |
2.Overcharge Protection Current:0-50A |
3.Over-discharge Protection Current:0-120A |
17 | 512 Channel 5V 2A 3A 5A 6A Battery Tester | 1.Current:0.05A-2A/3A/5A/6A |
2.Voltage:0-5V |
3.Channel:512 |
18 | 256/512 Channel 5V 6A Lithium Battery Tester With Energy Regenerative Function | 1.Current:0.05A-6A |
2.Voltage:0-5V |
3.Channel:256/512 |
4.Lithium Battery Tester with Energy Regenerative Function |
19 | PVC Heat Shrink Wrapping Machine | 1.Film speed:50~70PCS/MIN |
2.Film precision:±0.1MM |
Shenzhen AITOP Intelligent Equipment Co. LTD, is a manufacturer which combines R&D and marketing ,we have professional R&D team as well as proficient stuff ,and has been specializing in researching and producing high quality lithium battery machine for 10 years . Our main products ranges from 18650 battery pack assembly machine ,Power Battery PACK assembly machines ,Power Bank Assembly machine,Mobile Phone Battery assembly Machines,Battery safety test equipment,Injection molding machine,Molds, Molding materials, machine parts, etc
We keep in place with the word ,we adopt lastest technology and design ,our Aitop series battery machine stands out in the same industry area ,Up to now ,we have obtained many inventions patents ,practical new patents ,and own independent intellectual property rights
.
With the increasing development ,We have created two workshops to manufacture battery machines and injection molding machines
Through our efforts, the Automatic Battery PACK Assembly machines are now widely used in Mobile phone,Power bank,Laptop,Electric bikes,Electric vehicle,solar street lights,Solar energy storage,Banks,LED devices,Health Equipments ect,the low-pressure injection molding machines are now widely used in PCBs, sensor products, wiring harnesses, medical electronic products, etc. In addition, OEM/ODM services can be provided to customers worldwide. Our products enjoy high quality and guarantee all-weather after-sales service, thus winning our 70% market share..We look forward to cooperation with the customers all over the world .
Address:
No. 24 Hongma Road Shangnan Shajing Bao′an 518125, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Shenzhen AITOP Intelligent Equipment Co. Ltd, specialized manufacturing machine for Lithium battery pack assembly line and all kinds packing machines
(BMS tester, cells internal resistance tester, cells capacity tester, cells sorting machine, manual/automatic spot welding machine, battery pack integrated tester, battery pack charging&discharging cabinet and etc ) more than 15 years. Machines used in manufacturers of batteries for Power bank, Solar, laptops, E-Vehicles, E-Bikes, E-Tools, Mobile phones, Energy storage and etc.
Our AITOP machines for Li-ion Batteries assemble are intelligent, simple to learn, easy to operate, with on line service.
One-year warranty and lifetime maintenance are our guarantee of quality.
We have an oversea after-sales service teams in New Delhi, India and now is quite popular.
Our co-partnerships:
In China: Like BYD, SCUD, Desay, UTEK, LISHEN, GREAT POWER, TIANNENG Battery, SUMEC. etc.
We have professional and exclusive after-sales teams in China, India, which can arrange after-sales in time. Should you have any interesting&questions,
Look forward to cooperating with you. Please feel free to contact. Thanks