Basic Info.
Mixer Type
Magnetic Mixer
Application
Liquid, Pharmaceutical Liquid, Such as Eyedrop, Inejction
Application Area
Pharmaceutical
Layout Type
Veritical, Horizontal
Additional Capabilities
Mixing
Operating type
Continuous Operating
Transport Package
Carton or Wooden Case
Specification
0.18-8kw or customized
Product Description
The magnetic mixer, a fully closed, non-leakage, non pollution mixing, is installed at the bottom of tank. Because the sanitary magnetic agitator is a non-contact transmission torque with no transmission shaft, it is made by magnetic drive. The dynamic seal was replaced by the static seal, which solved the problem that the other shaft seal could not overcome the leakage. The whole material and the stirring parts were operated in a sterile and sanitary state. It is pharmaceutical, fine chemicals, cosmetics, bioengineering and other industries ideal replacement products.
Application scope: mixing device for all kinds of reactors, mixing tank and storage tank
Working condition: inflammable, explosive, easy to leakage, high requirement on sealing
Technical parameter: working temperature:-40~220ºC
Material: 316L or 304
Working pressure: -0.1~0.6Mpa
Model selection description: should know the change of viscosity and density, working temperature and working pressure
Working characteristics
Sanitary magnetic mixers are designed for GMP modification in pharmaceutical, bioengineering and food industries.
Good performance, reasonable structure, small volume and reliable use.
The mixer is composed of inner magnetic steel, external magnetic steel, isolation sleeve and driving motor.
It is applied to mixing device of stainless steel reactors and mixing tanks.
All the contact materials of the magnetic agitator are made of 316l/304. The working principle of permanent magnetic coupling is used to drive the operation of stirring shaft. The dynamic mechanical seal is replaced with static mechanical seal, which solves the unavoidable problem of mechanical seal. The magnetic agitator produces a whirlpool by rotating, sucking dissolved powder or liquid into the swirl and being quickly sucked into the stirring impeller.
When the suction direction of the impeller rotates with the impeller, the centrifugal force impinges different media into the tank wall in the form of radiation from the outer diameter of the impeller.
After hitting the tank wall, the liquid is sucked back to the suction end of the impeller with impact force and rising cycle.
The constant moving agitation under the impeller thrust results in homogenization, mixing, dissolution and dispersion.
Product parameter
Model | CYCM | Surface | ≤0.6μm |
Name | Magnetic bottom mixer | Application | Pharma, chemical, food, biological |
Material | 316L/304 | Assembly | Can be customized |
Tank volume: 20L-10T
Model:CYCM
Connection method: Weld
Using max speed min/r:500
Using max temp ºC:220
Max viscosity CP:100
Whether to equip with frequency converter: yes
Impeller Form: 3 blades, 4 blades, 8 blades
Motor-decelerator: 0.18-8kw/380V/50Hz
Motor brand: SEW/ Nord/ Simens
Installation method: Horizontal/ Vertical
Contacted material: 316L
Non-contacted material: 304
Bearing material: tungsten carbide
Model selection
Model | Impeller diameter(Form) | Motor power | Mix volume / Vessel | Rotate speed |
CYCM90 | Φ90(3 blades) | 0.18-0.25kw | 20L-50L | 355 |
CYCM120 | Φ120(4 blades) | 0.37kw | 80L-200L | 355 |
CYCM155 | Φ155(8 blades) | 0.55kw-0.75kw | 300L-500L | 335 |
CYCM200 | Φ200(8 blades) | 1.1kw-2.2kw | 1000L-2000L | 335 |
CYCM220 | Φ220(8 blades) | 2.2kw | 3000L-4000L | 335 |
CYCM240 | Φ240(8 blades) | 2.2kw-4.0kw | 4000L-5000L | 335 |
CYCM270 | Φ270(8 blades) | 4.0kw-5.5kw | 5000L-6000L | 335 |
CYCM320 | Φ320(8 blades) | 5.5kw-8kw | 7000L-15000L | 335 |
Outside dimension
Model | L | L1 | H | H1 | H2 | H3 | D2 | D1/Welding plate/vessel opening diameter |
CYCM90 | 334 | 63 | 290 | 158 | 80 | 129 | 139 | 92 |
CYCM120 | 346 | 63 | 294 | 162 | 88 | 129 | 139 | 92 |
CYCM155 | 371 | 63 | 309 | 177 | 109 | 129 | 139 | 115 |
CYCM200 | 411 | 63 | 365 | 233 | 139 | 139 | 156 | 180 |
CYCM220 | 463 | 75 | 374 | 233 | 139 | 150 | 156 | 180 |
CYCM240 | 463 | 75 | 386 | 245 | 140 | 150 | 179 | 190 |
CYCM270 | 463 | 75 | 386 | 245 | 140 | 150 | 179 | 190 |
CYCM320 | 463 | 75 | 431 | 290 | 160 | 150 | 179 | 235 |
Address:
Huanzhen Road, Nanqiao North Village, Yongxing Street, Wenzhou, Zhejiang, China
Business Type:
Trading Company
Business Range:
Agriculture & Food, Apparel & Accessories, Health & Medicine, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Lights & Lighting, Manufacturing & Processing Machinery, Service
Management System Certification:
ISO 9001, GMP
Company Introduction:
Wenzhou chengyi machinery Co., Ltd. Supply stainless steel mixing tank, crystal tank, storage tank, emulsifying tank, emulsifier, emulsifying pump, sanitary pump, filter, sanitary valve, pipe fittings and other fluid equipment. Chengyi machinery technology team has more than 10 years of mechanical manufacturing experience and professional equipment knowledge, to provide customers with reasonable and effective solutions. Chengyi machinery professional technology, high quality products, meet the pharmaceutical, food, biological, daily chemical, chemical and other fields.
The company adheres to the "quality first, reputation first, service first" business purpose, adheres to the "honest, pragmatic, win-win" business philosophy, to provide clients with the best service, best product quality and perfect after-sales service to win the majority of customers rely on and support. Chengyi machinery is willing to work together with every new and old customer to create brilliant future!