Overalls, Anti-Static Clothing, Labor Protection and Safety Clothing, Combat Uniform, Training, Fire Fighting and Fire

Fire protection clothing for type 20 firefighters (a) (zfmh-ht/ a)

      It meets the requirements of the uniform type of type 20 fire protection clothing style and the standard of ga10-2014 fire protection clothing for firefighters. It has the properties of flame retardant, waterproof, air permeability, heat insulation, anti-dyeing, anti-static and strong marking. The product is composed of four layers of structure: surface layer, waterproof and air permeability layer, heat insulation layer and comfort layer. The exterior surface color is Tibetan blue.

1, Style

(1) The main structure.

1. Upper and lower split structure. The overlap between the top and trousers shall not be less than 200 mm.

2. Collar. The collar is vertical collar, with a protective collar at the front. The inside of the collar is made of smooth color skin-friendly fabric.

3. Reflective identification tape. The top is equipped with a 360 degree circular reflective mark belt at the chest, hem and cuff, and one 360 degree circular reflective mark belt for pants at the lower leg. Reflective marker band width is 50.8mm (2 in), and the color is yellow silver yellow.

4. Crotch. The crotch of pants is designed in one-piece.

5. Trousers back. H-belt, adjustable length and detachable.

6. Zipper no. of front front of top shall not be less than 8.

(2) Ancillary structure

1. Pocket. The left chest of the jacket is equipped with radio stereo pocket, waterproof bag is set inside the placket and the outer sticker bag is set at the lower hem. One tool bag is set on the outer side of thigh. All outer pockets are provided with water leakage holes.

2. Mark the magic stick. 90mm on the outside of the left upper arm × 110mm shield type magic stick with shield type logo. 19 fire soft chest emblem is set on the left chest with magic paste of the same shape, which is used to paste 19 firefighters' soft chest emblem or 19 fire cadres soft chest emblem. 90mm for right chest × 57mm rectangular magic sticker with fire fighter chest logo.

3. Cuff. The cuff is designed in circular arc shape, the outer layer of natural color cloth is wrapped, and the tightening adjusting loop is set, and the rib protection wrist guard is equipped. The rib protection wrist has thumb hole and the water stop cloth is set inside.

4. The top is on the front. The top placket is a through type.

5. The hem of the top. The water stop is set under the comfortable layer of the top.

6. Hem. The design of circular arc is adopted at the mouth of the trousers, water stop cloth is set inside, zipper is set on the inside, and wear-resistant material is set for the hem of the trousers.

7. Reinforcement treatment. The shoulder, elbow and knee shall be thickened with wear-resistant layer, and the wear-resistant layer shall be soft and easy to clean.

  8. There are two hanging loops on the left and right shoulders.

2, Technical parameters

   The weight of clothing is less than 2.8kg. TPP value of overall thermal protection performance is ≥ 34 cal/cm2. Outer layer: aramid material blended with xt3900/pmia three in one pair of aramid and interlace aramid, surface moisture resistance: outer layer 3, flame retardant property: continuous burning time 0s, damage length longitudinally ≤ 35mm, weft direction ≤ 40mm, no melting and dropping phenomenon, breaking strength ≥ 1350n, weft ≥ 1030n, tearing strength longitudinally ≥ 215n, latitude ≥ 160n, joint breaking strength: longitudinally ≥ 935n The latitude is ≥ 745n. The waterproof and air permeability layer is aramid fiber felt covered with PTFE membrane. After 25 washing, the oil repellent reaches grade 4, the static water pressure resistance is greater than 50000pa, the water vapor transmission is ≥ 5926g/ .2Square meters24h, the thermal stability performance is 260 ºC, and the shrinkage rate is 1.0% after 5 minutes treatment. Insulation layer: the insulation layer is aramid water prickle felt, and its flame retardant performance: the duration of continuous combustion is 0s, the damage length is ≤ 11mm in the longitudinal direction, and the latitude is ≤ 15mm, and there is no melting and dropping. The comfort layer is a mixture of 50% aramid and 50% flame retardant viscose. The flame retardant property: the burning duration is 0s, the damage length is ≤ 30mm, the latitude is ≤ 18mm, and there is no melting and dropping phenomenon. The breaking strength is ≥ 375n and the latitude is ≥ 350n. The product shall provide inspection report and fire protection product certification certificate.