Basic Info.
Appliance
Food Analysis, Medical Research, Biochemistry, Water Treatment
Certification
CE, ISO9001
Range
2000us/Cm (Standard)
Output
4-20mA Signal Output; Relay Output; RS485; Ttl
Origin
Shijiazhuang, China
Product Description
ER/EC/PH/ORPOnline Water Quality Transmitter BSQ-2019EC/ER/pH/ORP-2019 series transmitter mainly used for the water quality monitor sensor signal output, by 4-20mA, RS485 or TTL, the sensor output weak signal is enlarged to transmit, can be convenient for PLC, configuration software and SCM to communicate by adopting standard communication protocol MODBUS protocol.EC/ER/pH/ORP series transmitter is widely used in metallurgy manufacturing, power, light industry, textile, water treatment equipment, water pipe network and the scientific research and other industrial sectors. Transmitter Series Introduction:
Note: A module of the transmitter can only be equipped with one sensor, EC/ER is a module, and PH / ORP is a module. 1. EC conductivity transmitter; range: 0 ~ 4000us / cm, 0-10/20/200mS2. ER resistivity transmitter; range: 0 ~ 18.2MΩ3. pH transmitter; range: 0 ~ 14.00 pH 4. ORP redox potential transmitter; range: -2000 ~ + 2000mVTransmitter Series Technique Specification:
No. | Range | Matched sensor | Accuracy | Connection |
1 | 0.1~18.25MΩ 0.05~10.00uS) | 1:316L S.S. plug into 0.01 sensor 2:Quick install 0.02 sensor; | 2 %FS | 1/2″NPT 1/4"Quick install |
2 | 0.1~200.0uS | 316L S.S. plug-into 0.1 sensor | | 1/2″NPT) |
3 | 0.5~2000uS(standard) | ABS1.0 Pt. Black sensor(standard) 316L S.S. plug into 1.0 sensor | 1.5% FS | 1/2″NPT |
4 | 2~4000uS | ABS1.0 Pt. Black sensor(standard) 316L S.S. plug into 1.0 sensor | 1.5% FS | 1/2″NPT |
5 | 0.5~10mS | ABS1.0 Pt. Black sensor(standard) 316L S.S. plug into 1.0 sensor | 3 % FS | 1/2″NPT |
6 | 0.5~20mS | 1:316LS.S. plug into10.0 (standard) 2:PTFE+Titanium alloy 10.0 sensor | 1.5 % FS | 1/2″NPT 3/4″NPT |
7 | 0.5~100mS | 1:316LS.S. plug into10.0 (standard) 2:PTFE+Titanium alloy 10.0 sensor | 2 % FS | 1/2″NPT 3/4″NPT |
8 | 0.5~200mS | PTFE+Titanium alloy 10.0 sensor | 2 % FS | 3/4″NPT |
- EC- Conductivity transmitter technique specification,
- Stability: ±2×10-3FS/24h,
- Sensor: 1.0cm-1 constant ABS engineering Plastic Pt. Black sensor, Plug-in or quick-install optional ( other 10.0cm-1 constant sensor optional),
- Sensor threaded size: 1/2″NPT,
- Cable length: Plug-in type standard length is 5m, Quick mounted type is 1.5m,
- Measured media temperature:0~50ºC,
- Sensor working pressure: 0-0.5Mpa,
- Temperature sensor: NTC 10K,
- Temp. compensation: On basis of 25ºC, Auto temp. Compensation.
4.2 ER- Resistivity transmitter technique specification, - Measuring range:0~18.25MΩ
- Accuracy:2.0%(FS),
- Stability: ±2×10-3FS/24h,
- Sensor: 0.01/0.02cm-1 S.S. 316L sensor, Plug-in (Cell=0.01) or quick install (Cell=0.02)
- Sensor threaded size: 1/2″NPT,
- Cable length: Plug-in type standard length is 5m,
quick mounted type is 1.5m,- Measured media temperature:0~50ºC,
- Sensor working pressure: 0-0.5Mpa,
- Temperature sensor: NTC 10K,
- Temperature compensation: On basis of 25ºC, AUTO temperature compensation,
4.3 PH-PH transmitter technique specification, - Measuring range: 0~14.00,
- Accuracy:2.0%(FS),
- Stability: ±2×10-3FS/24h,
- Sensor: online PH sensor,
- Sensor threaded size: 3/4″ BSP,
- Cable length: standard length is 5m,
- Measured media temperature:0~50ºC,
- Temperature sensor: NTC 10K,
- Temperature compensation: On basis of 25ºC, AUTO or Manual temperature compensation,
- Calibration mode: Three points calibration,
PH4.00,PH6.86,PH9.18,4.4 ORP- ORP(Redox) transmitter technique specification, - Measuring range: -2000~+2000mV,
- Accuracy:1.0 %(FS)
- Stability: ±2×10-3FS/24h,
- Sensor: online ORP sensor,
- Sensor threaded size: 3/4″ BSP,
- Cable length: standard length is 5m,
- Measured media temperature:0~100ºC,
4.6 Other common technique specification, - Output current: 4~20mA, isolated / Optional:1-5V /2-10V;
- Relay output: High/Low limit relay alarm output, Contact point current 24V/3A, 220V/2A ( Passive dry contact)
- Power: DC12V-28V, 24V(Current <=0.1A),
- Environmental conditions: Working temperature:0~50ºC, Relative humidity: ≤ 85%RH,
- Overall dimension: 122×72×45mm(L x W x H),
Installation mode: Cabinet rail installation
Address:
No. 8 Huifeng Road, Qiaoxi Dist., 050000 China, Shijiazhuang, Hebei, China
Business Type:
Manufacturer/Factory, Trading Company, Individuals/SOHO, Other
Business Range:
Apparel & Accessories, Construction & Decoration, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Service, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
Hebei Bossen is a leading manufacturer, supplier and exporter of water analysis instruments.
We are specialized in supplying industrial online conductivity meter, TDS meter, Resistivity Meter, pH meter, Reverse Osmosis Controller, Flow meter, Level transmitter, Dissolved Oxygen meter, Free Chlorine Analyzer, Turbidity meter etc, all parameters that may refers to the water analysis. Product range cover many application areas including industrial, handheld, laboratory, aquarium, agriculture etc. Besides, we also supply instrument related products such as meter protection box, integrate system, control panel etc.
In fact, we supply solutions for your water quality analysis process. So if you have any related requests or questions, please feel free to contact us. We will get back to you quickly and offer you exactly what you need with best prices and fast delivery.
Good quality, best price, excellent after sales service and technical backup, as well as good communication with our customer, making us the main agent and partner of many overseas customers for the past 15years, we are hoping to build long term business relationship with you! ! !