Basic Info.
Structure
Single-stage Pump
Performance
No Leakage Pump
Product Description
DKB60 SERIES Industrial use brushless DC water pumps
Boosting /circulation /Variable-frequency /Low-noise/shield pump /PWM control /signal feedback
♣ Applications
1:Solar heating water circulation
2:Water Purification Equipments
3:Drinking water machines
4:Automatic water dispenser
5:Water cooling equipment
6:Engine cooling
7:Heating equipment cooling
8:Cooling Towers
9:Irrigation Landscape
♣Features
♦Centrifugal pump
♦Magnetic force transmission (shield pump structure)
♦High efficiency brushless DC motor, low power consumption, high efficiency, long service life.
♦With wide range operating temperature
♦PWM signal speed controlling
♦With constant flow controlling
♦Reverse polarity protection (optional)
♦Dry running protection (optional)
♦Over Voltage,over current protection
♦Overload,over temperature protection
♣ Technical description (parts in contact with the liquid)
Pump head housing: PPS+GF
Impeller: PPS+GF
Shield cavity: PPS+GF
Shaft sleeve: Carbon resin composite materials/ ceramic sleeve
Shaft: ceramics axis/stainless steel shaft
Seal ring: EPDM
♣ Driving device (Including motor)
Driving electromagnet: Plastic magnetic molding
Screws and nuts: SUS 304 stainless steel
Driving Motor : brushless motor
Motor wire frame: PPA+GF (black)
Pump housing: PPS+GF(UV resistance)
Bracket: SUS 304 stainless steel
Bracket hoop: US 304 stainless steel+ Damping rubber ring
Waterproof based on IP67 rating (en60529)
Wiring:3 leads / Waterproof connector is optional
Nozzle diameter:20.5mm (inner diameter:14.5mm)
♣Model Specifications
DKB60-12G 12 V
DKB60-24G 24 V
With mounting bracket model suffix : SR (e.g:DKB60-12GSR)
♣ Mounting instruction
DKB60 series pumps are centrifugal pumps which require pre-filled, the pump installed in the lowest position of the system to ensure that the impeller is always immersed in the liquid, or pre-filled the pump before power on .
1: Pump should not be dry-running, even though it can dry-running for 30 seconds (after 30 seconds dry-running, it will automatically stop), Dry running will makes noise, also increasing abrasion to the shaft and shaft sleeve.
2:Use the recommended diameter threaded pipe connecting the pump inlet, if you use a smaller diameter hose pump inlet, Due to the negative pressure in the pump, the outside air easier enter to the pump through the pipeline, it will make the pump performance degradation, and also the air bubbles make damage to the pump.
3: As viewed from the pump inlet direction, the impeller rotates clockwise (see the arrow on the outlet port).
4: The pump can be installed vertically or horizontally mounted (see figure 1 ) When installed vertically, the outlet port should be upward .
5:In order to avoid the dry- running (air get stuck in impeller),the water pump outlet port should be vertical or in the upper of the impeller. (see figure 1 )
6: The connected pipe should be vertically mounted (or no elbow in 20cm )to make the air discharged easily, the outlet pipe should not be used less than 90 degrees Elbow (see figure 2).
7: Can't use the seawater or other heavy pollution with big grain impurity liquid as the liquid medium .
♣ Temperature parameter
Medium liquid temperature: -25ºC to +105ºC (-13°F to + 221°F)
Working ambient temperature: -10ºC to +100ºC (14°F to +212°F)
Storage temperature: -40ºC to +70ºC (-40°F to +158°F)
(up to 100 ºC, but it will shorten the service life)
♣System pressure
-0.2 to 2.5 bar ( 100ºC (212°F).
The service life is more than 20,000 hours based on the rated voltage and 36ºC(86°F) ambient temperature.
♣Voltage range
Rated 12V water pump, workable range 9V - 16V
Rated 24V water pump, workable range 16V - 30V
Although the motor can be used in a wide range of voltage and temperature, but excessive or too low voltage and temperature will affect the service life of the motor, the pump can not be exposed to thermal radiation ambient.
Medium liquid: pure water, liquid mixture (Water with below 60% glycol)
♣ Electrical parameter
No. | Specification | Datas |
1 | Rated voltage | 12V/24V |
2 | Workable voltage | 9-16V / 16V-30V |
3 | Rated power | 5-60W |
4 | Flow range | 0-20L/minuts |
5 | Range of lift | 0-10M |
6 | Noise | ≤40dB |
7 | Service life | 20000H |
8 | Operating mode | continuous working |
9 | Diameter of inlet | 20.5mm( inside diameter:14.5mm) |
| Diameter of outlet | 20.5mm( inside diameter:14.5mm) |
| | |
♣ Attentions
1. Working ambient temperature:-10ºC--100ºC, should try to avoid close to three-element catalytic, gas discharge pipe system and engine during the installation, ensure the working environment temperature.
2.The installation position of the water pump should as much as possible close to the low water level, to extend the service life of the pump.
3. In order to reduce water resistance, should as much as possible to reduce the number elbow in piping in the installation, ensure no any elbow within 20 cm from the pump.
4. Please use the pump far from the dusty environment, the dust is harmful to reduce the service life
5. Pay attention to the purity of the water, avoid to jam and impeller-blocked to reduce the service life of pump.
♣Pump structure
♣Customization service:
1:The pump parts customizable according to customer specific requirements
2:Pumps' performance parameters customizable according to customer's requirements
3:Optional accessories of the pump customizable according to customer's requirements
4:Special circuit program customizable according to customer requirements
5:The outer housing can be customizable according to customer's requirements
♣Curve chart
♣Water pump overall dimensions
♣Water pump overall dimensions (with bracket)
♣Water pump overall dimensions (barb hose joint)
Address:
No. 28, Shunyuan Road, Xinbei District, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery
Company Introduction:
Changzhou Decarbon Motor technology Co., Ltd is always applying itself in developing and manufacturing Brushless DC Motor, stepper motor, Brushless DC motor drivers, Brushless DC motor controllers, step motor driver, step motor controller, Servo Motor, servo motor driver, Water pump Driver, Intelligent Inverter water pump and electromechanical products since its establishment. The products, widely applied in automatic control, household electric appliances, automobiles, motorbikes, medical equipment, body-building equipment, automat and the other fittings, are mainly exported to Germany, Sweden, the US, the UK, Italy and Algeria.
With solid researching and developing strength, well-trained employees and strict inner management system. Through years′ development and accumulation, we have formed our own distinctive enterprise manner---researching intensively, producing professionally and serving devotedly. We are convinced that our sincere efforts will bring the market our top-quality products and service. Besides, we cordially welcome cooperation talks with enterprises and individuals both at home and abroad to seek common development and prosperity.