Basic Info.
Transport Package
in Container
Specification
30-60mm is in common use
Product Description
Low-consumption Energy saving Coal Briquette Machine
Simple introduction of Coal Briquette Machine:
Coal briquette machine is mainly used for high-density metal scrap (scrap iron, copper scrap, aluminum scrap, etc.), granular powder metal powder (iron powder, aluminum powder, copper powder, lead powder, etc.) , metallurgical additives, sponge iron, etc., without adding any binder pressed into the case of cylindrical cakes of high-density block (weight 2-8 kg), the cake density of up to 5T/M3 block above (the different raw materials, press out the cake block density and not quantity is not the same), pressed into the cake pieces can be directly cast furnace use.
1) Raw material size should be smaller than 5mm.
2) The best moisture for briquetting is 10-15%
Main characteristics of Coal Briquette Machine:
The coal briquette machine can press all kinds of mineral powder, metal powder, coal powder, coke powder and other materials to make them molded. Because of the mandatory squeeze rollers, so the products have the three high characteristics: high density high strength, high hardness, Because of the mandatory squeeze rollers, so the products have high density, high strength, high hardness, and the local roll is used in 65Mn hard materials with good wear resistance. Effectively improve the life of a roll.
Working principle of Coal Briquette Machine:
1.First,the powder material will be transfered on to the two pressure roller through the feede
2.The natural materials enter the ball roll mode with the roll rotation.
3.Material pressure on a small part become larger, when the material enter into the two pressure rollers,the pressure of materials has reached the peak.
4.Tremendous pressure between the two roller,the powder become finished product.
Features of Coal Briquette Machine:
1.In order to ensure the good quality and mechanical strength of the final product, special care should be taken to ensure that the granule size fed to the machine is maintained below 3mm,preferable in the range of 30~40% small than1~2mm, with no more than 10% over 2mm.
2.The moisture content of the mixture has also a critical effect on the quality of the final product, so it should be kept in the range of 8~20%.
3.Raw material of coal industry(coal powedr, coke, coal sludge, etc)need to make coal briquette, using in industrial boilers and civilian boiler.
Technical parameters of Coal Briquette Machine :
Model | ZZXM-4 | ZZXM-6 | ZZXM-8 | ZZXM-10 | ZZXM-15 | ZZXM-20 | ZZXM-30 | ZZXM-40 |
Production | Hour | 3-4T/h | 6T/h | 8T/h | 10T/h | 15T/h | 20T/h | 30T/h | 40T/h |
| Annual | 10000T | 20000T | 25000T | 30000T | 50000T | 100000T | 200000T | 300000T |
Roll Width | 250mm | 240mm | 220mm | 300mm | 336mm | 400/500mm | 500mm | 700mm |
Roll Diameter | 360mm | 400mm | 450mm | 500mm | 650mm | 750mm | 850mm | 1000mm |
Power | 7.5-11KW | 11-15KW | 15-18.5KW | 18.5-30KW | 22-45KW | 30-55KW | 55-90KW | 90-110KW |
Structure of Coal Briquette Machine:
Coal briquette machine mainly consists of a frame,speed reducer,upper and lower frame,spindle seat,main spindle,main bearing,coupling,king roller,side roller,wheel hub,main driven gear,ball socket deviation adjuster,
bearing seat,main assemblage of papilionaceous springs,oil cylinder,piston,oil pump,feeding funnel and output belt.
1.Coal briquette machine Feeding system:
ration feeding and ensure the iron powder go into the machine evenly.
2.Coal briquette machine AC motor:
electromagnetic speed regulation motor. It can maintain the constant feeding pressure to make sure the stable quality of outlet briquettes when the feeding efficiency of conveyor feeder is equal to the required amount of iron powder of main machine.
3.Coal briquette machine Forming part:
motor, V-belt, cylinder gear speed reducer, exposed gear and rollers.
4.Coal briquette machine hydraulic type:
Hydraulic protection device: when the machine working, the hydraulic pump drives the high pressure oil into the hydaulic cylinder to make the piston axial displacement. Then the front connector of piston rod will be on the bearing block, which can meet the requirements of production pressure.
Coal briquette machine's service:
(1)Pre-sale services:
According to your special needs, design and manufacture products for you, provide you with project design, process design, purchase program suitable for your machines and equipment.
(2)Sale of services:
Assist you to complete acceptance of the equipment, and the construction program and detailed process.
(3)After sale service:
Our factory sent technicians to teach how to install the equipment, commissioning and training of operators.
Application of Coal Briquette Machine:
Coal briquette machine is widely applied to produce powdered coal and coke fines briquettes , powered charcoal bar of fertilizer industry,applicable to mineral briquettes of chemical industry,applicable to mineral fines of diffierent kinds of ferrous and non-ferrous metal, applicable to iron scale and dust elimination of metallurgy and applied to produce balls of sludge and refractoriness.
1. Home heating stoves;
2. Hot water boilers and the industrial boilers;
3. Easy transportation for powdered materials.
If you are interest in our coal briquette machine, please contact us without delay, our engineers can design the most reasonable proposal for you based on your demand.
Address:
Company Address: Mid-Heluo Road, Gongyi City, Henan China, Zhengzhou, Henan, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001
Company Introduction:
Henan Zhongzhou Heavy Industry Technology Co., Ltd. We are factory specializing in the. Manufacture and export of charcoal briquette machine, coal briquette extruder machine and dryer machine for more than 20 years in China. Zhongzhou Brand briquette machine is more and more popular in China, many state owned enterprises have cooperated with us all the same such as Bao Steel Mill, An Steel Mill, Shao Steel Mill, and the equipments be exported to Ukraine, India, Korea, Malaysia, South Africa, Greece etc many aboard countries.
This series of products have gained CE certificate and passed ISO9001 International Quality System Certification in the trade. Our company has already produce more than dozen various briquette press machine (over 10 models) with various usages, that suitable for different material. Until now, our briquette machine got 11 patents, there are 6 patents belongs to briquette machine (please see that attachment). And enclosed the detailed specification for briquette machine.
Our company use equipment quality to create market, expanding the influence and building famous brand. That is long-term business strategic for exporting in worldwide. Use perfect design, select quality material, sophisticated process and assembly with super-technology, all for producing "Zhongzhou Brand" Nice briquette machine series.