HD Sdi Camera Tester, CCTV Tester with 7 Inch Touch Screen, 800X 600 Resolution

Details:

MODEL
HVT-3600 optional models
Display
7 inch touch screen, 800x 600 resolution
SDI Digital Video Level
1channel SDI HD Video in, 1 channel BNC video out
Video IN/OUT
1 channel BNC Input & 1 channel Output, Support PAL and NTSC
Video Level test
Video Level Meter
Video PEAK level, SYNC level, Color Burst measurement
DV12V Output
Output temporary 12V power for camera, the current is near 1A
Audio Input
Test the pickup and other audio equipment on the front-end
PTZ Protocol
Support more than 30 protocols, such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc. Baud rate: 600-115200 bps, Support RS232 and RS485
Color Bar Generator
Output one channel PAL/NTSC color bar video signal for testing monitor or video cable. (red, green, blue, white and black color)
UTP cable test
Test UTP cable connection status and display in the screen. Read the number of the test box.
Data Monitor
Captures and analyzes the command data from controlling device
Photograph video record and playback

Snapshot, video record, view the storage file in the SD card.

IP scan\Link monitor\PING test
IP scan
Find out the connected IP camera or the other network equipment IP address quickly.
Link monitor
Check the IP address whether available
PING testing
Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
Cable scan
Search the cable by the audio signal
Poe tester
PoE tester
Display the power supply voltage and cable connection states
Digital Multimeter
AC/DC Voltage
0-660V auto/manual range, the min resolution is 0.1mV
AC/DC current
660.0uA, 6.600mA, 66.00mA, 660.0mA, 10.00A
Resistance
660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ, 6.600MΩ, 66.00MΩ
Capacitance
6.6nf~66000uF, the min resolution is 1pf
Diode
0~2V forward voltage, the min resolution is 1mV
Data hold
Hold the measurement optical power value
Relative measurement
Display the difference value of the first testing result
Continuity testing
Built-in buzzer will sound, if resistance is lower than 50 Ω
Testing speed
3 times/ seconds
Data range
-6600~+6600
Optical power meter
Calibrated Wavelength(nm)
850/1300/1310/1490/1550/1625nm
Power range(dBm)
-70~+10dBm
Sensitivity(nW)
0.001nW
Connector type
FC/PC
Data hold
Display data hold
Relative measurement
Display the measurement value
Optical Power Meter
Wavelength(nm): 850/1300/1310/1490/1550/1625nm
Measure range (dBm): -70~+10dBm
Visual Fault Locator
Test fiber's bending and breakage (SM and MM fiber)
TDR Tester
Breakpoint and short circuit measurement(BNC cable, telephone cable)
POWER
Power Adapter
DC 5V(2.5-3A)
Battery
Built-in 3.7V Lithium polymer battery, 15000mAh
Rechargeable
After charging 8-10 hour, working time lasts 16 hours
Low Consumption
Energy saving technology, the battery icon real-time display
Parameter
Operation setting
Capacitive touch screen. English/Chinese OSD menu
Auto off
5-60 (mins)
Keytone
On/Off
General
Working Temperature
-10centigrade---+50centigrade
Working Humidity
30%-90%
Dimensions
231*172*52mm/1.26KGs