Laser Sub-Surface Engraving Machine INSIDER-I

INSIDER-I Green Laser Engraving Machine adopts seamless technology, to engrave large area by moving worktable. High resolution of equipment (the resolution of different laser will be different) can ensure the quality of crystal pictures which will be more exquisite and vivid, so as to realize the collection value of the crystals. Moreover, the engraver software interface is user friendly, which can directly read function of 3D point cloud data, without using a third-party software, easy to operate. 1. Components of Laser Sub-Surface Engraving Machine INSIDER-I

Green laser;
Laser Power Device;
Cooling System: Air Cooling;
GSI high speed and high accuracy optical scanning mirror and driver imported from Germany;
A set of homemade beam expander system and a set of homemade optical F-θ focus lens.
Laser engraving accessory equipped with a computer (including an exclusive control card of our company).
Software system: Special laser engraving software
Working platform: Triaxial linkage worktable with high precision

2. Technical Specifications

Laser Wavelength: 532nm
Acousto-Optic Q Switching Frequency: 2500Hz;
Cooling System: Air Cooling
Size of engraved image: 120mm x120 mm x80mm
Size of crystal: 160mm x160 mm x100mm
Maximum Resolution: 800 DPT
Laser Pulse width < 8 ms
Standby Consumption: 300W
Power Maximum Consumption: 600W
Power Supple Input: AC220V; 50/60Hz
Weight of Main System: 103KG
Dimensions of main system: : 480mm*780mm*750mm

3. INSIDER-I Laser Engraver Machine Feature

Fast Engraving Speed:
Normal engraving time, taking the crystal sized 50*50*80mm as an example: 120 thousand points <60/s. High efficiency is good for promoting our business.
Easy Operation:
For starters, it takes two days to get familiar with the software of camera and the machine.

4. Environmental operating temperature

If the environmental temperature is beyond 15-30, it requires air-conditioning.
Environmental Humidity: 40%-80%.
Power supple fluctuation: ± 5%, power system is comply with international requirement. When voltage amplitude of the area is above 5%, auto-voltage regulator and current stabilization device should be installed.
There should be no strong electromagnetic signal interference near the equipment. Avoid installing the equipment near radio station (or repeaters).
Foundation Amplitude: Less than 50um amplitude; Vibration acceleration: < 0.05 g. Avoid large stamping machine nearby.
Make sure the space around the equipment is smokeless and dust-free, avoiding environment with floating metal grinding powder.
Atmospheric pressure: 86-106 k PA;
Some place should install anti-static floor, strengthen shielding, etc